How to connect the plug to the internet:

Follow these instructions exactly and it will work easily:

1 - plug the camera in and wait until the camera is on for 30 seconds

2 - Let it go on until the light is solid, changes colors, and then has a pink for like a second and a small flash of blue. If it is FLASHING back and forth equal, it needs to be reset. It should be a solid color with a small flash of blue. The pink will be longer.

THE PLUG IS NOW SET TO SEND OUT A Wi-Fi SIGNAL.

Please understand: the way to connect to the camera is to first connect the phone to the Wifi coming FROM the camera, and then push the regular wifi to the camera.

GO TO YOUR PHONE SETTINGS AND LOOK FOR THE Wi-Fi THAT IS A 16 CHARACTER STRING THAT STARTS WITH A CMSxXX-XXXXX-XXX. It may say no internet connection, but if it is connected you are good.

Go to the app and press the plus to add new camera. You HAVE TO PRESS + AGAIN. THIS WILL START THE SETUP PROCESS

Select the plug camera

Press the 3 dots to search for the home Wi-Fi. Select the Wifi you want to connect to. Make sure to Connect to a 2.4gHz Wi-Fi and enter the home Wi-Fi password and press connect

It should take at least 30 seconds for the camera to register it and connect. Then it will take you to the main screen to show a list of cameras

It will not work yet. The camera needs to restart and the phone needs to connect to regular Wi-Fi again and lose the Wi-Fi CMSXXX that it was connected to. This takes about 30 seconds. You can keep trying to reset the connection arrows to reconnect, after 30 seconds it should work

It might flag you to offer to change your password, you can if you want

What happens if it doesnt work?
You need to reset the plug camera. Follow these instructions exactly and it will work:

1 - plug the camera in and wait till its on for 30 seconds

2 - push a pin in the hole next to the light and hold it in until the light goes off AND goes back on. Then release the pin

3 - It will restart. Let it go on until the light is solid, changes colors, and then has a pink for like a second and a small flash of blue. If it is FLASHING back and forth equal, you did the reset wrong.

Then go back to the top and connect again