HOBBYWING Quicrun 10BL120 G2 & 3660SL G2 Combo (QR10BL120 + 3660-3700KV SL G2 Combo)

I absolutely love this setup. I like that you can adjust everything on the esc. The motor is beefy with a 5mm shaft. I put this in my arrma granite and typhon 3s and man is it fun and fast. I decided to put the 3150kv in the granite and the 3700kv in the typhon to have two different setups. The granite is running a 15t pinion on big rock wheels that makes it pretty durable and fast at the same time. The typhon with the 3700kv is on a 20t pinion. I can’t usually get it to full speed before letting off the throttle. I sometimes switch to the 26t pinion and I’ve gotten it up to around 60mph maybe little more. If you are looking for a great quality reliable system you can’t beat these for the money

This set up Rips. Have been struggling wirh motor and esc problems on my Arrma Vorteks. Have tried just about every "cheaper" esc, from 80a to 120a, using 3s, all cut out. Was using a 3660 4250kv motor, would scream fir about 1 minute, then cut out. This combo runs better, as fast, more torque, and next to no heat from motot or esc.Great product. Spend just a little extra, and it makes a world of diffrence.

Really fast took a while to ship but I haven't had any problems got to 58mph in my touring car

Perfect combo for upgrading arrma vorteks mega to brushless. This is the one you want for this platform. The 3700kv motor has sufficient length to clear the chassis for the vorteks. Shorter motors would require trimming to fit. I paired this setup with a 5mm shaft pinion and it works great with the vorteks gearing. With this setup on 2s it's so much quicker and faster than the stock brushes setup.

I really love this motor has plenty of power for what do

The media could not be loaded. Installed this setup in an Arrma Fury 550 mega 2wd SCT. 2s lipo really showed how great this setup is. 3s, holy moly, she will run like a scalded dog! Be sure to get a 0.8 mod 5mm shaft pinion gear. I went with 18t. I also ditched the stock gear mesh spacer. Grab a couple of small washers and the mesh can be set yourself.

The media could not be loaded. Awesome upgrade for ARRMA Gorgon. Works perfect with no extra mods needed (does not come with drive gear). Take that Gorgon or Vorteks RWD to the next level.

Installed in arrma gorgon. Greatest thing ever. This setup along with a $17 fan, and a 17 tooth pinion is an absolute blast. Ran 2 6500mah packs and a 5000mah straight through it. Lasted 2 hours in the heat. The motor hardly was warm. This was 2s. I couldn't be happier with this motor and esc for the money. I hope it lasts a good while.