BOSYTRO 24V 25A 600W DC Switching Power Supply, Universal Regulated Switching AC110V/220V (SMPS), 24 Volt Power Supply for 3D Printer, CCTV Camera Security System,Computer Project

The product arrived and works perfectly; it's a fantastic buying experience.

I bought it so i could use a car amplifier on my home stereo. I was able to adjust the voltage with the screw labeled 'VV' to 14 which was perfect. Setting it up was easy and now my entire house rattles if i want. I cant tell if its truly outputting 1500 watts, but my 2k watt amp and wires are warm before it is. Makes slight noise when first setting it up or changing voltage but it became quiet in a minute or so as it adjusted. Well worth it.

I have used 4 of these so far. I am installing them as the core the SMPS in radio power supplies I have designed. I have added control switches and full volt / amp displays with additional common mode filtering and high current aircraft rated power connections. The only internal components I swapped was the cooling fans which I thought were a little loud especially when having 4 units on at the same time. The quiet fans I installed fit well and are very quiet. With all the modifications, switches, displays and project case, the total project cost was less than 50% of the expense for stand-alone low noise power supplies for radio equipment. My test spec for ripple and common mode noise was lees than name brand power supplies. I am very pleased how these worked out.

Definitely brings the power , warming up a 10 amp pc cord highly recommend Update: its been about a year this power source still strong highly recommend Although I developed a problem ended up limiting current, traced the problem to the 240 to 125 volt switch, im using 125v so bypassing the switch fixed the problem its working fine , i recommend replacing that switch with a 30 amp rated switch , as this one is rated for 10

I would buy again for same purpose. However, buyers need to be aware that the case does not seem to be properly grounded which caused a problem on my 3d printer. It was easily resolved by electrically isolating the case from the frame of the printer though. The symptom I observed was that upon power-up everything seemed to work fine. However, upon starting a print job or starting the heating element, the display screen would go wild and show all kinds of crazy images/characters. After electrically isolating the case mounting points from the frame of the printer, everything has been working fine. No harm done in my situation as best I can tell so far and a great low cost solution for the purpose.

This thing is B A. THAT'S ALL.

I'm impressed with how well it works and that it handles 125 amps. Wired and amplifier to it and it worked great.

Excellent power supply. Purchased in March of 2024. Has an unlisted feature: boost mode. If being used as a charger/auxiliary supply for off grid, can be current limited to prevent charging too fast. If ac to the unit is lost, when ac is restored, will bypass the current limit under heavy loads running at 80% (max continuous power) until load is reduced. Helping to maintain the battery % under heavy loads. Whether this is a feature or not I don't know, but it is handy to have.

___&___MUY BUEN APARATO LLEGO INESPERADO ANTES DE LO ACORDADO BIEN ENPAQUETADO CALIDAD Y PRECIO EXELENTE LO RECOMIENDO. SI. TU. TU. SIVAS A COMPRAR UNA LLEVATE ESTA. BOSYTRO AL 100 PARIENTE SALUDOS DESDE TIJUAS BAJA KALIFAS 664/878/05/2026. SOLO SOLIN jauria santa

今のところは、普通に動いてる

EXELENTE