Deliver to Bolivia

For best experience Get the App

Sobre nosotros

Servicios al cliente

Atención al cliente

Acceso Regional

Legales y políticas

Social

Obtén la aplicación

Apunta tu cámara para descargar la aplicación

Customer support

We're available 24/7 to help you!

Skywalker Signature Series Y Type Chimney Mount with 18ft Steel Straps

Q: Are the small ends where the U bolts go set at 90 degrees to the part extending from the Y bracket to create a flat surface to attach a flat board to?

Yes. The smaller end flanges where the U-bolts attach are pretty much 90 to the main axis of the bracket. The bracket is pretty heavy duty, but if you needed to a vise and adjustable wrench is all that is needed to adjust the angle to which you need. So yes the two flanges make a flat surface to which you could attach a flat board to.

Q: With this product, is it required to bolt or attach in to chimney? Also, is the 18 ft reported per roll, or total?

18 ft is per roll and raps around the chimney. There are two rolls. There are no instructions (which is sad) so you just have to use your own judgment as to how to best install this antenna support.

Q: I just received this, I don't have instructions. Can someone please help.

First of all wear gloves when handling the strapping that goes around the chimney, the metal is sharp and will cut you at a glance. Place the Y bolts on either side of the mount at the widest point. Before getting to chimney, slide the metal clip retainer on the strap with the ears closest to the Y bolt, slide the strap on the Y bolt then take the end and go through the retainer once, fold the strap back over the retainer and squeeze the clips down over the strap. Repeat the process on the other Y bolt at the chimney. The obvious thing to do with the U bolts is attach your mast to the mount once your have attached both assemblies to the chimney. I hope this helps.

Q: Tightening the bolts, the clips slip so I crushed them down, now I need to relocate the antenna and need 4 more clips, can I get them from you?

These are Band-It clips Pretty expensive as I don't know anyone selling less than 100 pieces.

4.2/5

ID del producto: 569555791

Transacción segura

Comprados juntos con frecuencia

Descripción

Skywalker Signature Series Y Type Chimney Mount with 18ft Steel Straps

¿Tienes una pregunta? Mira lo que otros preguntaron

Are the small ends where the U bolts go set at 90 degrees to the part extending from the Y bracket to create a flat surface to attach a flat board to?

With this product, is it required to bolt or attach in to chimney? Also, is the 18 ft reported per roll, or total?

I just received this, I don't have instructions. Can someone please help.

Tightening the bolts, the clips slip so I crushed them down, now I need to relocate the antenna and need 4 more clips, can I get them from you?

Preguntas comunes

Trustpilot

Trustscore 4.5 | Más de 7,300 reseñas

Por Ravi S.

Me encantó la variedad de productos disponibles. Definitivamente volveré a comprar.

Hace 2 meses

Yusuf A.

En general, fue una experiencia fantástica. Se lo recomendaré a mis amigos y familiares.

Hace 1 mes

Ver todas las reseñas de confianza

Compre globalmente, ahorre con Desertcart

Valor por dinero

Precios competitivos en una amplia gama de productos.

Compre globalmente

Sirviendo a más de 300 millones de compradores en más de 200 países

Protección mejorada

Opciones de pago confiables que adoran los compradores de todo el mundo

Garantía del cliente

Opciones de pago confiables amadas por los compradores de todo el mundo.

Aplicación DesertCart

Compre sobre la marcha, en cualquier momento y en cualquier lugar.

Bs.1729

Derechos e impuestos incl.

Boliviaalmacenar

Devoluciones gratuitas

30 diaspara usuarios de membresía PRO

15 diassin membresía