Mryitcal Button Maker Machine Multiple Sizes, 1''+1.25''+2.25'' Pin Maker Button Press Machine W/300 Sets Metal Pinback Button Parts, Badge Button Machine for DIY Photo badge, Team Badge, Party Favors

Q: Is it convenient to change the mold?

Yes,there is a video of changing the mold for your reference

Q: How do you put machine together

see the video. Use a little more pressure on the second press, preferably twice. If the molds do not join together on the second press, the button will not seal

Q: Q: These are 2 of the bad ones that didn't attach to the back when I pressed. How to avoid it?

Answer: 1: Make sure there are no problems with the installation. If something goes wrong with the installation, all subsequent steps will fail. 2: One of the most common causes is that your paper is too thick or too thin.We recommend using 24-28 pound copier paper. 3: wrong circle graphics.Your graphic has to be cut exact and even. It should not be bigger than the mylar and the edges need to be nice and even. 4: You need to push the handle down with a bit of force in the last press. It is best to hold the handle tightly with your hands when pressing for the last time, so that the upper and lower molds can be tightly combined with each other. 5: The top die may become loose after a long time of use. If the mold is loose, that's maybe the cause you failed pressing. Because the vertical force between the upper and lower molds cannot be applied when pressing. Tighten with an L wrench before installing the upper mold if it needs(Do not over tighten, make sure the upper die can rotate properly) 6. Don't forget to put the metal pin that holds the sliding mold fixing. If there is no metal pin, the force of the upper and lower molds will not be uniform, which will cause the button unsealed. Metal pins are easy to lose, so we've included a few extra for emergencies 7. Only put one piece of paper and mylar at a time, too thick material can cause jamming and seal failure. Since papers or mylars are easy to stick together, you may not notice how many layers are there when putting

Q: why the left side isn't crimping and lifting up the paper, front metal piece and mylar?

When crimping the left side, the pegs of the top die should not go into the holes. but when crimping the right side pieces, the pegs on the top die need to go into the holes

4.4/5

ID del producto: 583092350

Transacción segura

Detalles

Brand
Mryitcal
Color
Purple
Item dimensions L x W x H
11.81 x 9.45 x
Material
Metal
Size
Purple-300

Comprados juntos con frecuencia

Mryitcal Button Maker Machine Multiple Sizes, 1''+1.25''+2.25'' Pin Maker Button Press Kit W/300 Sets Metal Pinback Button Making Supplies,Pin Badge Machine for DIY Photo Badge, Party Favors

Button Maker Keychains Supplies, 200 Pcs 58mm Pin Maker Set, Metal Button Maker Supplies with Metal Shell Cover, Transparent Film & Chain Head

Descripción

Mryitcal Button Maker Machine Multiple Sizes, 1''+1.25''+2.25'' Pin Maker Button Press Machine W/300 Sets Metal Pinback Button Parts, Badge Button Machine for DIY Photo badge, Team Badge, Party Favors

¿Tienes una pregunta? Mira lo que otros preguntaron

Is it convenient to change the mold?

How do you put machine together

Q: These are 2 of the bad ones that didn't attach to the back when I pressed. How to avoid it?

why the left side isn't crimping and lifting up the paper, front metal piece and mylar?

Preguntas comunes

Trustpilot

Trustscore 4.5 | Más de 7,300 reseñas

Anjali K.

La calidad del producto es excelente. Exactamente lo que necesitaba para mi trabajo.

Hace 1 mes

Zainab N.

Fantástico y excelente servicio. El envío fue más rápido de lo esperado.

Hace 1 semana

Ver todas las reseñas de confianza

Compre globalmente, ahorre con Desertcart

Valor por dinero

Precios competitivos en una amplia gama de productos.

Compre globalmente

Sirviendo a más de 300 millones de compradores en más de 200 países

Protección mejorada

Opciones de pago confiables que adoran los compradores de todo el mundo

Garantía del cliente

Opciones de pago confiables amadas por los compradores de todo el mundo.

Aplicación DesertCart

Compre sobre la marcha, en cualquier momento y en cualquier lugar.

Bs.4099

Derechos e impuestos incl.

Boliviaalmacenar

Devoluciones gratuitas

30 diaspara usuarios de membresía PRO

15 diassin membresía

Transacción segura

Trustpilot

Trustscore 4.5 | Más de 7,300 reseñas

El rey F.

Tienda muy confiable con productos genuinos. ¡Seguro que volveré a comprar!

Hace 2 semanas

1. Suresh K.

Me impresionó mucho la calidad y la entrega rápida. Volveré a comprar aquí.

Hace 4 días

Ver todas las reseñas de confianza

Sobre nosotros

Servicios al cliente

Atención al cliente

Acceso Regional

Legales y políticas

Social

Obtén la aplicación

Mryitcal Button Maker Machine Multiple Sizes, 1''+1.25''+2.25'' Pin Maker Button Press Machine W/300 Sets Metal Pinback Button Parts, Badge Button Machine for DIY Photo badge, Team Badge, Party Favors

Detalles

Descripción

¿Tienes una pregunta? Mira lo que otros preguntaron

Preguntas comunes