Loctite PL Premium Polyurethane Construction Adhesive, 4 fl oz Squeeze Tube, 1 Pack

My application was to bond a plastic access panel to drywall and it worked perfectly - exactly as advertised. Pop the cartridge into a caulking gun and it's ready for use. One word of caution would be to apply first to the surface you are trying to bond (in my case the plastic access panel) and let it set up for about 20 min before applying to the surface as the directions indicate. This way it almost immediately bonds and holds in place as it will dry quickly enough so the item will not move around. It takes 24 hours to fully dry, but that time is necessary in case you are trying to do something that would disturb the item before set-up is complete. It's fairly easy to use but can be a bit messy if you're not careful and mostly because at least in my case the glue kept coming out of nozzle to quickly but that was probably more an issue with the caulking gun. Also wear gloves so you don't get it on your fingers, which I failed to do - it will clean off the hands, but not easily. The only other issue is it is pretty much a one-use product, since it will dry solidly in the nozzle blocking future use unless I figure a way to clear the blockage. If you're looking for a bonding glue that will work on virtually anything, that is easy to use and a good value, this may be what you've been looking for.

Alright folks, if you're ready to ditch mediocre glues and embrace the sheer sticky power of the gods, then listen up. Loctite PL Premium Polyurethane Construction Adhesive is about to rock your DIY world. First things first, this stuff is seriously potent. We're talking hold-a-brick-to-the-ceiling potent. Picture this: I accidentally glued my work boot to a 2x4. Did it ruin my day? Kinda. Did it destroy the bond between the wood and my boot? Absolutely not. Had to saw the boot off, but that 2x4 wasn't going ANYWHERE. Versatility? This stuff laughs at labels. Wood, metal, concrete, ceramic, even stubborn drywall that refuses to stay put – Loctite PL Premium handles them all like a champ. I've fixed wobbly deck chairs, reattached loose bathroom tiles, heck, I even used it to mend a cracked ceramic gnome (don't judge, the wife loves that creepy thing). Application is a breeze, even for clumsy folks like me. The stuff goes on smooth, gives you a little wiggle room for adjustments, and then sets with the tenacity of a bulldog chewing a favorite toy. Weather resistance? Forget about it. Rain, snow, scorching sun – this adhesive just shrugs it off. Now, a fair warning: this stuff gets MESSY. Wear gloves, old clothes, and maybe even a surgical mask if you're feeling cautious. Once it's on, it's on for good. But honestly, that's part of the charm. You know a project done with Loctite PL Premium is built to last. Bottom line: If you're tired of flimsy adhesives that fail the moment you look at them funny, Loctite PL Premium is your new best friend. This stuff is the duct tape of construction adhesives – it might not be pretty, but it gets the job done with an almost supernatural level of stick-to-itiveness.

Works good. Attached stainless steel screen to cement block

I used the adhesive for baseboard installation. It worked great. The only issue was the adhesive was continuing come out even not pushing with the adhesive gun.

Good and reliable. So far

If you apply and let it set for 2 hours (it recommends 24) then no matter how hard you pull, it's not coming off. This is because it comes out as a liquid, gets into all the cracks, then drys into a rubbery-like solid. This creates unbeatable cohesions. Excellent for concrete jobs.

Strong bond on the tile and marble in my bathroom, it worked great

Lock tite always great quality