E-TECH EE03-R RED-Car/Bike Engine Enamel Paint-250ml

Gives a good finish, it does dry quick which is good

I bought this for some engine painting, I was worried that I would need a second tin to get the job done and thought it runs expensive to get a simple task done. My concerns were soon put to rest, the paint once stirred has a thick pigment and covers so well you will never need to apply a second coat. I painted a large area and haven’t used a quarter of the tin. This is something you can depend on to do a great job

Does the job well, goes a long way.

Goes on engine well. Not tested it’s temperature resistance yet as I’mStill building the engine

Used three coats on a Steel engine block, and still have a little over half a tin left.It states it can be overcoated after 30 mins, though I'd recommend 24hrs for each coat.Beautiful finish. Self levelling, very low drip. Durability: No idea, I'm confident though.Could also be used as caliper paint, it's identical to the paints sold as 'caliper paint'

Used this to paint the calipers on my Renault.. they are still looking good almost 2 years later

Used this to do all four brake callipers on a Jeep Renegade.Used a wire brush in a drill and finished with wet/dry emery paper. After using brake cleaner applied x3 coats on each calliper with 30 minutes in between coats.Waited one hour after last coat before replacing wheel and left vehicle overnight before driving.Bonus is there’s loads left in tin.

So easy to use - just brush on. You think that you've received a small tin of paint but actually I've loads left over after painting the engine above.