GEOSATpro 36"/90cm FTA Satellite Dish and .5dB NR SL1PLL Single Standard LNBF

This is my second dish, replacing a generic Chinese 30x34 inch dish. It is significantly better made, finding several transponders which the cheaper disk could not resolve. More directional means better performance, but more care is needed when pointing at the tricky satellites. I found it able to resolve the Ku 12180 V PBS transponder on AMC-21 at 125W from the stronger Hughes Internet satellite at 127W, something the generic disk was failing to do reliably. It was well-packed for shipping by FedEx Ground. I like the darker-colored finish, it is less visibly obtrusive than the Generics. The mount is solid as a rock (by comparison with my earlier dish) and the level gauge inset into the top of the mounting pole is brilliant!

The dish was easy to assemble with great instructions. It picked up some satellites. For the price it was a pretty good buy.

I give it a 5 star for easy hook-up! And during a very harsh winter, it always worked just fine! Gets all the sats, that are reachable from my N.E. sky! I have it hooked up to a motor and a Linkbox controller! Nice! Just use the remote to chage channels and away it goesright to the propper sat. instantly! Nice picture!

I bought three of these several years ago, but only setup two. I must say these dishes have held up very nicely over the last several years. There was some rusting on some of the hardware, which I've replaced, and the the white lettering on the back side on the dish has faded some, but that's to be expected when mounted on a pole outdoors 24/7 in rain, snow, or shine. Overall, the dish's general appearance looks very good. I'm confident in saying this is a well made product. In fact, I still have the original LNBF's, the slimmer ones, which are working just fine still picking up most of the relevant transponders on 97 W, 87.1 W, and 91 W.

The stand for it is so awful that I haven't even been able to use it yet despite buying it over a month ago. Now I'm going to have to buy a separate stand for another $100 and hope it fits with this thing.

The Ku-LNB is off the correct setting!! Should be (10725?? I can't remember, but this one is WAY off) the LNB that came with it is so off the correct number, none of the stations came in on their correct Transponder number. I had to do a Blind Search, they did come in - I write this much later than when I bought it, because I JUST found out of this fact. I thought the transponder numbers listed online were wrong- NO- my LNB is wrong!!!The Dish itself is fine, and everything came with "all the nuts and bolts". It's a nice, dark metallic color with no graphics. Very easy to install.

I used this for my FTA satellite system.Worked great ,better signal than old system.Easy to setup.Great technical support.

The arm of the dish is weak and it does not align well, once you tight every screw still shakes and doesnt stay on the desired position