eXtremeRate Full Set Shell with Buttons Touchpad Cover Compatible with ps5 Edge Controller, Dream Blue Custom Replacement Decorative Trim Shell Front Back Plates Compatible with ps5 Edge Controller

After mixing “Hope Gray”, “Black”, and “Scarlet Red” complete shell kits and buttons for the Dualsense Edge controller, I was pleasantly surprised to discover the pieces all fit very well together. I had never did this before and found the instructional video was nearly sufficient to completely explain the process. There were 3 points in the installation video that became difficult. So I had searched for other videos and pieced together these other sources of information in order to solve the problems I was having. 1) The shoulder (trigger buttons L2 &R2) had springs that popped off when disassembled. These springs were not mentioned in the video at all, probably due to my Edge Controller being a different model than the one in the video. I was able to find another video source that completely described the installation of these springs. 2) The shoulder (trigger L2 & R2) buttons have a part inside the button that needs to be removed, but the video doesn’t completely describe how to remove these parts. I was able to piece together information from other videos to remove these parts from the buttons. 3) There were several occasions where the pieces would not fit together and I had to take them apart and reassemble them over and over until they finally fit. Patience was key here. These shell kits do not come with all the tools you may need, such as tweezers for electronics, hairdryer/heat gun for the touch control pad, and a magnetic pad for organizing all the screws that are removed in the disassembly process, and a magnetic screwdriver is a huge bonus. The installation process took me just about 3 hours to complete. I did not replace the touchpad. Had I replaced the touchpad, I assume the installation process would’ve taken another half hour. These complete shell kits are a great value when you consider the cost to have someone build a custom controller. I would’ve easily spent an additional $100-$200 dollars more if I had this custom built. Overall the look is great. I got everything I was looking for in controller with a customized shell. The pieces fit well together, (admittedly) after several attempts of reassembling them. I was fortunate not to have any unsightly gaps in between the pieces. The quality is great and is similar if not equal to the strength, thickness and durability of plastics used in a controller directly from PlayStation. Much like the original plastics that came with the controller, I found the grip of this shell to be rather slick. So I installed some thin, rubberized grip, which makes for a very nice non-slip grip. This grip also helps with keeping the controller from sliding around on a hard surface like a table. Now I’m very happy to have a controller that I love the look of!

I want to put out there that I'm 68 years old and an avid gamer. I splurged on a Dualsense Edge but could only get it in white. Oh well! Time to make it mine! I looked at the selections of the ExremeRate Full Set Shell kits and just loved the selection that was available. I picked one knowing first off that it would probably be quite an intense changeover, but it's like everything else. If you take your time, follow the directions and have patience, it will turn out. I was impressed with the detail, paint job, the way things fit together nice and tight and the Youtube video that explained the disassembly & reassembly of the controller in easy to understand steps. They give you everything you need to kit up and maintain your new controller. I ended up adding custom silver sticks and cushioning for hand grips. I also integrated some of the old parts to add contrast to the basic color which was a chameleon blue purple. So again, if you have the patience and you follow directions well, you'll end up with one awesome looking controller. I would definitely recommend this kit for anyone that's good with their hands.

Installation was easy, unfortunately you do need a heat gun and tweezers to successfully install the front grips and and touchpad. Im only giving 4 stars because the shell isnt perfect, there are minor gaps, which can be a problem with dust in the future but doesn't effect functionality. the place where the front and back meet at the end of the grips is slightly off, which doesn't effect anything but it bugs me.

A bit complicated to install, but not too bad if your savy, installation video is pretty good. The fit and finish is basically OEM. Feels great in the hand.

Images 1&2 is what I had in mind the second is what I ended up. Purchased two full kits ended up being able to use two pieces of each kit. So here we go.... First of all they have an excellent online resource in their YouTube video as it does incrementally go through the entire tear down and rebuild however this wasn't as useful as I thought it would be simply because the pace at which the reassembly occurs is much on screen is faster than I, a novice at doing such things could go and therefore found myself constantly having to go back and forth in the video trying to make sure I didn't miss a screw or a piece which I did several times. Then when I got it all together with the new casing it did not align correctly 😡 the option button and share button recessed to the point where it was difficult to press them the faceplate also did not align correctly and constantly wanted to pop off 😩 (Now this could have been due to my inability to resemble the controller as intended it is trickier than it may seem) Ultimately after three teardowns and two failed reassemblies is I decided I would just go back to the factory prices. And luckily I was able to eventually get it reassembled and aligned correctly in the end was even able to use the backplate and the faceplate just not in conjunction with the other shell pieces.

Great value for the money it helped with the boring white controller that I have had for three years! It looks and feels like a new controller the color was spot on the grip feels good! All in all if you’re not afraid to take apart a 200$ controller I recommend this for sure! Everything functions as it should.

It’s made pretty well for the price like all of their other shells. The soft touch feel is also nice when holding and still allows you to grip the handles without worrying about it slipping or dropping. My biggest problem is how flimsy the back piece is when clipping in because I snapped two of them (one of them was a replacement) and after I finally got it to go on it still didn’t sit flush like it should’ve. Another issue that all of eXtremeRate’s shells have is the paint has already started rubbing off on the grip areas and I’ve barely even used it for maybe less than 5 hours total.

منتج رديئ جداً لا انصح به

My base white version started to wear down on the back handles (like alot of people have reported). Ordered this black version and followed the YouTube videos, so easy to follow just like their other ps5 kits. Everything was in the box and fit perfectly, no defects. Couldn't be happier with the new black look.

The bottom back shell grips on the official dualsense edge starts to yellow with age and peel off, so I was looking for a solution, eXtremeRate fixed the problem with easy to follow YouTube videos showing you how to install the parts. I only did the bottom part as I wanted to retain its original look.

Purchased for my dual sense edge controller and put together by my boyfriend! It took him about 3 hours and he had no problem w the parts. He is quite good at following videos so the time taken was relatively speedy. The orange colour is great - a solid orange similar to a creamsicle. We didn’t use all the parts and kept some parts black. Great part is we can switch it back whenever we want !

I will ExtremeRate the praise of not denying issues with the product and sending me one replacement when I initially complained and a refund when the replacement had the same issue. However from a product standpoint, i simply cannot recommend it. The back plate as seen in the photos simply do not “click” into place, they might make a clicking sound but they do not latch on. This ends up with extremely ugly gaps all around the controller. In the last photo i have used the OEM back plate alongside the other black pieces and whilst i looks passable, it definitely is not the full black look i was going for.