🧱 Secure your paving, secure your style!
This 5-litre Jointing Sand Stabiliser from Multicrete Products Ltd is expertly formulated to lock joint filling sand in concrete block paving, ensuring long-lasting stability and a pristine finish. Easy to dilute and apply, it requires dry conditions for optimal performance and is not suitable for clay or concrete flagstones.
Manufacturer | Multicrete Products Ltd |
Size | 5 Litres |
Item Package Quantity | 1 |
Batteries included? | No |
Batteries Required? | No |
M**T
Works great, mix properly 👍👍
Great stuff, I decided to mix it 1 to 3 parts water, spray on clean dry blocks and new sand with garden sprayer. Within 40 minutes, virtually dry to the touch. It already looks to be locking in the sand ! Not to mention it beings the blocks more to life with a nice Matt finish, a worthy investment , 5 ⭐🏆🌎 👍
M**N
Easy to use & works well !!!
Easy to use & sets the kiln sand rock hard in only a matter of a few hours.
N**S
but good for now
Not cheap, but it works well on my sloping block paved drive, used as instructed. Note it comes out milky, but dries clear. Result is that infill sand is "mortarised" and wasn't washed away by recent heavy rains. Dunno how long the effect will last, but good for now. If applying on a slope, probably better to use a coarse sprayer rather than a watering can, to minimise streaking - but any such effects can easily be scuffed off anyway.
J**R
Great for block paving driveways
Closing all the joints on my driveway.This is something that needs to be done about every five years or so.Once you have raked out all the weeds and grass then applied new sand this then needs to be used. The result makes the driveway look good and at the same time it cleans the paving.Quick drying and the driveway almost looks new.I have not found anything better for this job.
R**T
Brilliant stuff
Used this after cleaning my driveway and re-sanding and has worked great. The driveway is on a slope and usually after the first heavy rain it usually washes a lot of the sand out, but not this time.
M**Y
Economical and effective
At the recommended dilution, area coverage is impressive. It does what it says - hardens the sand between joints - and also leaves a pleasing satin sheen on the bricks / paving slabs.
M**.
Works as intended
Easy to use, clear instructions. An effective product that has worked well on my block paving.
I**7
Don’t waste your money !
After having my block paving down for several years I had weeds coming through in the gaps where the paviers had not sealed properly.They used a Marshalls product which made the sand like concrete which on the parts they sealed worked fine.As this Marshalls product is not readily available I decided to try this Muticrete version which looks to be the same or a similar product.After buying two 5ltrs at a cost of £70 I wish I hadn’t bothered !It was applied on dry sand exactly as directed on the instructions and there was no rain for days afterwards but the sand is still loose like it was before applying the product.I thought it would have hardened the sand to stop any weed coming through but apparently not.The next time I clean my drive all of the sand is going to come straight back out again.What a complete waste of £70 that I cannot afford to lose.If I could return the product I would !
Trustpilot
Hace 2 meses
Hace 3 semanas