UV Light Curing Putty for Model Kit Repairs & Detailing, Fast Repair Filler for Nicks,Scratches,Cracks on Resin,Quartz,Ceramic,Wood,Plastic,Stone,and Other Countertop Surfaces,50g

This is really a great product. I had a fin break off on my fish pump. I was able to mold it on the broken spot and harden it. Worked well. It’s also machinable. I really think the are many uses for this fixing things and patching not just on 3d prints. I left a photo. At first I did not have much hope for it and ordered a new one but this worked for a day or 2 and keeping it as back up. I could file it to make it nicer. This puddy is very versatile

Very easy to use. Great for filler for thin and small spots. Dries instantly with the UV light. I would recommend to any hobbyist who has had any problems using filler in the past.

This curing putty worked perfectly on a Lenox resin figurine that I purchased inexpensively on a site because its hands had been poorly re-glued and left a noticeable space. The waxy putty filled up the gap nicely and after smoothing and curing with a UV flashlight for about 30 seconds it was ready to paint. Unless you really stare you can't tell where the gap or break was located. Used very very little of the tin of putty so its price for this particular job was pennies and since it's packaged in a tin plus boxed in foam, it will last a long time when I need it for other projects. Very pleased with the outcome.

This UV curing putty does exactly what it claims. I’ve been using it to fill small voids, cracks, gaps, and surface imperfections in 3D resin prints, and it works reliably for that purpose. The 50g kit includes a stainless steel spatula, which is genuinely useful for application. The putty itself has a soft wax–like consistency, which makes it easy to place but harder to feather smoothly. If you try to spread it ultra-thin, it tends to peel up at the edges. Applying thin layers and sanding after cure works best. One of the biggest advantages is unlimited working time. You can shape and adjust the putty as long as you want before curing, which only takes 5–30 seconds depending on thickness. Once cured, it sands very similarly to printed resin, making blending straightforward. I’ve also used it to reinforce glue joints where CA glue couldn’t bridge larger gaps. Bonding to resin parts seems good so far, though I haven’t strength-tested it. Bottom line: Great for cosmetic repairs and gap filling on resin prints. Not ideal if you expect it to self-level or feather perfectly out of the tube, but if you’re comfortable sanding afterward, it’s a very handy material to have around.

Has a little bit of a learning curve to get used to the consistency of it. It basically feels like a semi-soft wax. Once cured it's as hard as the resin. Have used it on almost all of my models and have zero complaints.

Product was not at all like what is in the syringe. Do not order this product if you plan to use it filling gaps on 3d prints. I think I got a bad batch. Instead of being easy to apply it was like beeswatch / chapstick. Won't stick to my 3d prints and is at total pain to spread and use to gap fill. I ordered Jan 10, opened it today to use, went to return it and found out Amazon had closed the return window in 30 days. Was super angry. Do not order this product if you plan to use it filling gaps on 3d prints.

Works really well, I used it to repair a large buddha statue that was broken in transit rather that ship it back to China. Easy to apply, hardens immediately with a uvb light. Sanding and painting it was no problem.

I've been doing both resin and filament 3d printing for a few years. No matter how good your printer or file is you will run into times that you need to fill gaps, cracks, holes, or defects. Most of the things I use tend to be a little messy or take a while to cure. This UV putty is easy and not messy. I use a small tool to put it on and shape it tonwhat I need or even use my fingers to mold. Then I use a UV flash light to cure, and it's done. I definitely recomend this.

半分固まって届く

good.

本日、商品が届きました。 既に硬化していて使い物になりませんでした。 即、返品手続きします。

Perfect for filling seams in 3d prints! Would buy again.

Good putty. Cures quickly. Can be used to fill gaps and form small shapes. Bit expensive though. Needs to be around £10-15 pounds.