HQMaster 10PCS 1/8 17mm Carbide Flat Nose End Mill CNC Router Bits Double Flute Spiral Set Tool Nylon Resin ABS Acrylic PVC MDF Hardwood by HQMaster

Q: Hi. which tool router or drill are they be used with ?

You need an adapter 1/4" collet to 1/8" to use these on a standard router, you can find them on Amazon for die grinders. Otherwise most Dremo type tools have 1/8" collets. I use these on my home built CNC for machining wood products I make.

Q: Can these be used in a RotoZip?

I'm not 100% sure, I have been using mine in the dewalt 660 version of a rotozip on a CNC machine and they seem to work fine.

Q: What is the maximum RPM

It depends on the speed your traveling, and the typeof material your cutting , I've used it on medium to hard wood at about 12,000 rpm and feeding at about35 to 50 inches per minute and I lower the feed speed the harder the wood is. It would also depend on the depth of cut per pass, you don't want to force the feed to much or you could snap the bit and its only 1/8 inch diameter. I only run it at 1/8 inch depth per pass on my CNC router.

Q: What is the total length of this bit

About 1.52" (38.6mm). I say "about" because they vary slightly.

4.4/5

ID del producto: 642128177

Transacción segura

Detalles

Size
3.175 mm
Material
Tungsten
Brand
HQMaster
Cutting Length
17 Millimeters
Cut Type
Up-Cut

Comprados juntos con frecuencia

HQMaster CNC Router Bits 1/8" Shank CNC Bit End Mill Flat Nose Carbide Endmill Two Flute Spiral Upcut Milling Cutter Tool Set for Wood PVC MDF Hardwood 10Pcs (3.175 mm)