3D Printer LED Light Strip Kit for Bambu Lab A1 Mini, with 480mm Length Cable...

This light strip is perfect for the A1 Mini. It provides a nice bright light. Installation is a breeze, just pulll the protective strip and press it into the arm.

Very Bright. Way easy to install. Simple plug and play functionality. Only thing I would add that might be a detractor is that the cable is just a little short. I think it would be PERFECT if the cord were about 90mm longer. This would allow for it to run along the top, down the side, and then into the plug in back of my A1. Other than that...very good.

The light is very bright and sticks well to my A1 Mini. The only issue I've had so far is that the connections where the cable meets the light strip is very fragile and won't handle a lot of bending. I had to solder the wires back on mine.

Provides a decent amount of light but the power cord could definitely be longer. Of course, it was meant for an A1 Mini and I'm using it on the A1.

I know some people put theirs on the Z rail but I elected not to after reading some of the reviews. I elected to put mine on the underside of the gantry instead. I used a few of those tiny double sided command strips and then pealed off the sticky paper on the lights and that bad boy isn't moving. Very good upgrade for the price.

Very bright!

I really have mixed feelings about this product. Let's talk about the good: - It is absolutely plug and play. Just connect it to the second AMS port and it is powered immediately, you just have to flip the switch, and it is working. - It is super bright (Pro and maybe a con). There is no comparison between this one and the built in one. They are night and day. When you turn this LED lights on, everything will be illuminated, even the entire room of how bright it is. (See pictures for comparison) - It doesn't get too hot - It has a big power on/off switch - It does what it promises, 100%. Now, the part that I don't like. - It looks like an unfinished product. I don't like that the soldering and the little cables are exposed and unprotected at both ends. - When you are handling it and connecting or disconnecting it, it feels like it could break apart. Like, if I pull just with a little too much force, the cables will come undone and the whole thing will stop working. That is why I printed a little adapter to use it as an overhead light. First, I think it provides a lot more illumination being a little bit higher up and second, it offers some protection to the light as the cables and the soldering are now inside the little tube. I mean, I think the price is ok, but I would have preferred to pay a bit more for a more polished product. In any case, this is a great light and works perfectly with the A! series.

Works fine