Orion Motor Tech AC Gauges, AC Manifold Gauge Set for R134a R12 R502 Refrigerant, 3 Way Car with 5FT Hoses Couplers & Adapter, Puncturing & Self Sealing Can Tap Freon Charge Kit

Tried it out today and worked perfectly

First and foremost I, just like everyone else buying this tool, am a weekend warrior shade tree mechanic. My to go place is the local HF, however they didn't have a manifold gauge in stock neither in Tampa nor in Miami due to hurricane Michael.This particular gauge is exact same model as the cheaper version sold by Orion but comes with a can tap (I already had one so didn't care) and most importantly with couplers that can be shut close. 1/2 ACME adapter might become useful if I need to recharge my home A/C.As opposed to the HF gauge this one is missing a bleed valve for the yellow line which I overcame by unscrewing loose the gauge side of the yellow hose letting the air out. Would be nice of the manufacturer to add one.As far as the dreaded "stuck high pressure coupler" problem. I tend to believe this is simply to not understanding the basic concept of needing to shut the engine off and let some pressure out of the high pressure line hose (red) before attempting to remove the coupler.I did have a problem with the LP coupler which turned out to be a user error. In order to put it on I had to shut the valve close and then it went all the way in no problem.I purchased my CLS in June 2017. Been extremely happy with it, got rid of the airmatic suspension which made me even happier. Then in July 2018 the A/C started blowing hot air on the right. Read multiple forums which lead me to believe the problem lied in the heat core exchange valve (even though in that case the left vents would be blowing hot air). My launch icarscan scanner showed no problems.Before going through the painful heat core valve replacement process I decided to give it a try and add 3 OZ of freon. Which solved the problem immediately.Fast forward three months and the A/C stopped working again.Bought an FJC 4910 A/C UV dye, added it with a 5cc syringe inside the yellow hose, put 5 OZ of R134a with NO stop leak until the low line pressure reached 35psi and the A/C is working again.That's how I did it (I am no mechanic so might be wrong):1. turn off the engine, close the couplers', HP and LP valves.2. Connect HP and LP couplers. Should go in very easily.3. Start the engine, turn on the a/c.4.open the couplers' valves and the blue (LP) valve. Leave the red one closed.5.close the can valve so it punctures its seal. open the valve. Let some air out from the yellow hose by loosening it up on the gauge side until you see gas bubbles in the window.6. when the LP line pressure reaches 25-35psi (might vary a bit) close the couplers then the blue valve and can valve.7.shut off the engine and remove the couplers. might need to open the red valve to let some pressure out.P.S. I will update the review when the A/C UV dye shows where exactly the freon is leaking. Hopefully, it is just a seal and not the compressor. I have high hopes that the gauge will be able to hold -30psi vacuum. If not then it will be shipped back.

Double check that the manifold is in correct conditions. Just ordered these and was getting funky reading come to find the manifold was clearly defective. Quality controls issues I assume. Glad I revised before I started ordering compressors and what not. Not too happy about rescheduling everything to accommodate this mishap.Update 2025A team member reached out to me to send me a replacement set. It’s nice to see a company willing to make things right and for that I am thankful. Not many companies left with ethical and friendly service.

Rebuilding a 02 Grand Cherokee 4.7 and needed to vacuum out and recharge the AC system.Connections all fit tight, I like the plastic wrench build into the hoses to tighten.You could feel the oring fitting into place.Held vacuum overnight with no issues.Only downside and I'm not sure I can blame the product is using the can and self sealing punch. As you turn it to twist into the can, it grabs the rubber from the can and got them stuck where I had to back off the thread from top of the can to get good flow. Again, could be an issue with the can.All and all, did what I needed.

I am impressed by the quality of this set, especially for the price. As a retired mechanic/technician of 45 years of experience I've worked with many manifold sets, from cheap to very expensive as well as automatic recovery/recharging stations. This set is as good as any for the DIYer. It has everything needed for the weekend warrior to properly charge a R134a system or even an old R12 system (except for a clamp-on can tap). I highly recommend anyone servicing their own unit to use a full set instead of those low-side only quick charge systems because if you cannot monitor both sides of the system, you can set yourself up for big problems. This set will allow you to properly charge and diagnose problems you may have in the system. I highly recommend it for both quality and price.

Mi pedido llegó bien, y justo a tiempo.

As stated in the title, the product will work at least once, but if I were planning to repeatedly use it, this is not the product I would buy. There are no places to hang the hoses when not in use, the rubber gaskets in the hoses split as soon as you connect them and they leak (I had to replace them after 1 use), and the only way to use the carrying case is to completely disassemble the entire product to get it back into the case. Had I looked closer at the case before buying, I would have bought a higher quality set of gauges without the case. But the gauges themselves do work, and the product will work at least once…