EpsonFastFoto FF-680W Wireless High-Speed Photo and Document Scanning System, Black

I bought this primarily for helping a friend digitize photo prints. Her mother had recently passed away, and this put a seemingly countless number of loose photos and albums into her possession. I had committed to helping her and brought my flatbed scanner, not realizing the magnitude of the task at hand. On the first day over the course of six hours, I captured and cleaned up fewer than 100 photographs this way — it clearly wasn’t a workable solution for the volume of prints needing to be captured.I started looking for a scanner with a document feeder before I even left, and among the options I found, the Epson FF-640 stood out. I read and watched various reviews, but then I found one that mentioned the newer second-generation FF-680W, which seemed like a substantial upgrade, so I ordered one.For scanning most photos, the FF-680W is incredible. With my flatbed scanner, I had to manually place each photo on the scanner, tell my image editor to acquire a scan, wait for the scanner to generate a low-resolution preview, crop and rotate the image, check image enhancements options, and then hit Scan and wait for a slower, full-resolution scan to be transferred. I then had to save the image using the image editor, giving it a name and specifying the format and image options.The FF-680W on the other hand can scan and clean up probably about 20 prints at 600dpi in the time it took my flatbed scanner to perform the pre-scan and scan of just one image. Realistically, it took me three minutes to capture and then process one image with the flatbed, all of which required tedious manual steps. When I initially started scanning with the FF-680W, I used the option of saving both the original scan and the enhanced version in separate files, but the results of the enhancements are so good that I no longer bother and keep only the enhanced images.I have experienced only a single misfeed, and that was with a photo that was glued into a heavy cardboard frame. I didn’t think it would go through the scanner and set it aside to be scanned with the flatbed, but curiosity got the better of me and I tried it anyway. If the paper path was more straight, the scanner would be able to take the place of a flatbed scanner in many cases.I find the option to automatically scan the back of the photos for handwritten notes useful, but it is overly sensitive. On some of the prints I scanned, a "Kodak" watermark on the back was often the only thing that was captured. Those errant scans are easily identified and deleted when looking at the thumbnails of the scans, but I wish the software handled this better.So far I have really only used the scanner and included software for photos, although I tested the ability to create a searchable PDF from a printed document and a form. The results were good but not perfect, as is usually the case when doing OCR.The F-680W is quick, quiet, and delivers high-quality results. If it fits within your budget, it deserves your consideration. To get the most out of it and avoid some frustration, I suggest watching Epson’s short videos about the scanner on Youtube.May 10 2019 Update:I have done quite a bit of document scanning lately, with very good results. This involved taking apart three-ring and spiral-bound manuals and scanning them into searchable PDFs. The fact that the scanners handles both sides at the same time (and can even drop empty sides of a page) and the high scanning speed makes quick work of such manuals.You get graphic images of the pages, with the text obtained through Optical Character Recognition (OCR) behind it, so you can highlight the text and copy-and-paste it, or search for it. It is very rare that the OCR software misinterprets a character.In addition to the option for dropping empty pages, the software also has a feature for removing the binding holes from the scanned image for a cleaner look, but this seems to be hit-and-miss -- on some documents this has worked very well and completely eliminated them, and on others it has been inconsistent, leaving behind one or two holes from three-ring binding, or dozens on some spiral bound pages.The document scanning handles jams very well when they do occur. I had issues with one spiral-bound manual that hadn't been read yet, and the pages were sticking together where the holes had been punched. The scanner would jam when it tried to feed pages that were stuck together, but it never damaged any of them. It also seamlessly carried on the scanning once the jam was cleared (which involves releasing a latch and tilting the front of the scanner forward, then removing the jammed page). Likewise, adding more pages after all the pages have been scanned is a simple matter of clicking on a "Scan more" button and selecting single-sided or double-sided, so you can mix both types of pages in one scan.One thing that's missing is the ability to save the scan results in more than one format. Currently the software prompts you for a output format, and once the document is saved the scans from which the document is created are discarded. I would prefer being able to go back to the format selection so that I can save a document as both a PDF as well as a Microsoft Word document for example.August 5, 2019 Update:I just discovered the "Text Enhancement" option under the Advanced scan settings -- I had seen it, but hadn't tried it until yesterday. I am blown away by the difference that it makes when scanning documents into searchable PDF format. It has a substantial impact on scan times (each page takes two to three seconds to scan with "Text Enhancement" set to "Standard"), but the text is crystal clear and uniform, and to me the increased scan time is a small price to pay for the quality improvement in the output.I scanned a 292-page technical manual at 600 dpi with "Text Enhancement" set to "Standard" into searchable PDF format, and the only thing that gives a clue that the document was produced from a scan are the punch holes (which can be eliminated with another scan settings option). Other than that, it looks typeset.

This scanner completely lives up to its billing as "the world's fastest personal photo scanner." I had thousands of old photos that, because we're moving, I wanted to store electronically while throwing out the paper copies. After doing a fair amount of research, I landed on the Epson FastFoto 680W. It's pricier than some other scanners but well worth it. In two days, I scanned more than 4,000 photos without a hitch -- the scanner worked flawlessly across all different sizes of photos. It even enhanced the quality of the photos as I scanned them. One caveat: keep in mind that the super-fast scans (no more than a second per photo) produce photos that are 300 dots per inch; if you want to scan at a higher dpi, the scanner is a lot slower. As a result, I decided to keep copies of a handful of very special photos, while still being content to keep only digital versions of at least 95% of them. After scanning several thousand photos, I switched to document mode to scan hundreds of paper files that I also wanted to get rid of and it was even faster than it was for the photos because it scans even two-sided documents in no more than a second. My days of paper copies are finally over. In fact, I'm keeping the scanner on my desk so that every time I get a document that I want to save, I instantly scan it and then discard the hard copy of the document. Overall, this is one of the best products I've ever purchased and definitely the best scanner I've ever used.Unfortunately, after I wrote that review, and for no apparent reason, the scanner suddenly stopped working with my computer (a fairly new iMac). The computer simply stopped recognizing the scanner and nothing could get it to work, even after I uninstalled and then tried to reinstall the software several times. The software won't re-install unless the computer recognizes the scanner, which it won't. And the Epson customer support people were no help at all. So, while this is a magnificent piece of hardware, the software seems like it's still a work in progress.I'm updating my review to increase it to five stars. After the computer suddenly stopped recognizing the scanner, I finally tried replacing the cable connecting the scanner to the computer. Presto, the computer recognized the scanner again. So it wasn't the scanner that went bad; it was the cable that I was using. The scanner truly is phenomenal.

I love this scanner. It’s a bit pricey but worth it for me because I use it frequently. It’s small so it easily travels and it’s easy to use.I have digitized all of our old family photos both from my mom’s house and my grandparents house. The software has the ability to automatically enhance old photos which it does quickly as your scans are loading. You have the option to custom name batches of photos and choose to scan in one quality or multiple different qualities at once.It’s worth the money if you use it. But if this is a one time use thing for you to do something like digitize family photos, I’d say to hire that project out.The only problem I’ve had is the software not working with my old computer. But that thing is a dinosaur so that can’t be put in the scanner.It seems to have a software download to be compatible with any updated computer.