MICTUNING U8 RGB Underglow LED Light Bar, Dual Remote Control, Multicolor Underbody Light Strip with Aluminum Housing, Car SUV Exterior Neon Accent IP68 Waterproof, 8pcs

This kit is perfect if you are looking to add some auxiliary lighting to your truck bed. I have a 2017 Dodge Ram 1500 Crew Cab and the led strips are the perfect length to cover my entire bed. They provide an amazing amount of light and I no longer have issues finding stuff in the bed at night or stringing up a fishing rod or tying on a lure in the evenings on the tailgate before hitting the streams or rivers. The strips stick to the underside of the bed rails perfectly and the included on/off switch is very nice. The strips seem to be very well made and sealed, but the kit has only been installed for about a week so only time will tell how well they will hold up to our cold PA winters. The included switch and wiring with quick connects made the install super easy and quick, even though my install was a bit customized. My installation was a bit different than what the instructions called for. I wired the lights to a magnetic switch, as well as the included on/off switch, so that when I open my tailgate the lights automatically turn on without me having to push a switch or use the key fob. I left the included on/off switch installed so that I can turn the lights off when sitting around the bonfire on the tailgate or leaving the tailgate open for an extended amount of time. This setup works fantastic for me. Shipping and packaging were perfect and I got it in the normal allotted time for a prime membership. At the end of the day, the price and quality of this kit cannot be beat. It provides the right amount of clean, bright white lighting, good build quality, easy installation, and great features for an AWESOME price. If you need auxiliary bed lighting, look no further than this kit.

Instead of using these for the truck bed itself, I put them on the ceiling of my truck cap. These produce very bright light and I'm very happy with them. Installation: The kit includes everything you need up to your 12V supply and maybe a little cable management. To install on the cap, which I also needed to add power for my 3rd brake light and keep it easy to remove the cap from the truck, I bought some waterproof 3 wire/pin connectors. The lights all share a ground and power for the brake light and these lights are separate. Physical: Mounting the lights was easy and very secure with the adhesive backing. After installing these, the temps in the cap reached well over 100 degrees F for consecutive days and they have stayed stuck. My installation left me with lots of extra cabling for each of the light strips which I just taped up to the ceiling using some gorilla tape. Electrical: The hardest part of this install was finding the appropriate wires under the bed of the truck to connect to. RAM provides a brake light wire blunt ended to connect to and immediately be active, and they also include 12v steady or ignition based blunt end wires under there, but require an upfitter harness to activate them. Once that was all squared away I mounted the lights up and ran the wiring down through the side of the bed and soldered everything together. Would be easier with the low-temp solder heat shrink and just be able to use a lighter to make a good watertight connection. If you have easy access to the 12V supply and the right tools this is not bad at all. Conclusion: Absolutely worth the effort to install. So much more light in the bed which is especially helpful when the bed is full of random stuff and you need to find something in the dark. The built in lights at the rear of the bed just aren't enough, and when the cap is on the light on the back of the cab doesn't do anything. Also, those lights are just temporary and these can be switched on for extended use. (Photos coming)

Just installed the MICTUNING U8 RGB+IC Underglow LED Light Bars on my ride and I'm super impressed! These things are a game-changer. The kit comes with everything you need to install, so you don't have to worry about hunting down extra parts. Installation was a breeze - I had them hooked up in just a few hours, and that's with taking my time. The RGB lights look insane on my car, and the best part is how easy it is to change the colors and patterns. You can customize it to fit your mood or your car's style. The controller makes it super simple to switch between different colors and effects. If you're looking to add some serious flair to your whip, I'd definitely recommend these. They're easy to use, look great, and the price is right. Overall, I'm really happy with my purchase and I think you will be too!!

Not too bad. This isn’t super bright, but bright enough. Placement is EVERYTHING. Here’s the skinny: PROS -Price: you can’t get a better mid to your truck for a cheaper price -Quick: I have quite a bit of wiring experience but if you’re new to it, expect it to take :45 to an hour. -Easy to mount and trim: its 3M backed so the adhesive is good. And you can trim of the excess to fit your needs. Google how to and fill the end with silicone. CONS -Brightness. Not incredibly bright, however it’s enough to get the job don -Wire harness: The harness is my main complaint. The wires do not make sense for the wire up. I had to cut and splice extended wires to make it work with my small bed. And the power cable is for if you have a dedicated 12v always on power already ran. So if you don’t have a dedicated 12v power source then you’ll need to run it. -Switch: The Switch kinda sucks. It’s not a sticky back and does not have a way to mount. So be creative. I instead added my own magnet switch which works great. That being said, it’s well worth the money and if you’re looking for an affordable yet functional bed light or anywhere else, this will work.