DremelEZ409 1-1/2-Inch EZ Lock Thin Cut, Silver

I recently had the opportunity to use the Dremel EZ476 1 1/2 inch EZ Lock Rotary Tool for plastic cutting, and I must say, I am thoroughly impressed. This tool is a game-changer when it comes to precision cutting of plastic materials. The EZ Lock feature makes changing the cutting wheel a breeze, saving me valuable time and effort.The cutting performance of the Dremel EZ476 is exceptional. It effortlessly glides through plastic, providing clean and precise cuts every time. I was able to achieve smooth edges without any signs of melting or chipping, which is essential for my projects. The tool's ergonomic design and lightweight feel made it comfortable to use for extended periods without causing any strain on my hand.Additionally, the Dremel EZ476 offers excellent versatility. It can handle various thicknesses of plastic, allowing me to work on a wide range of projects with ease. Whether I needed to cut through a thin plastic sheet or a thicker plastic piece, this tool delivered consistent results.Overall, I highly recommend the Dremel EZ476 1 1/2 inch EZ Lock Rotary Tool for plastic cutting. Its ease of use, exceptional cutting performance, and versatility make it a must-have tool for anyone working with plastic materials.

Great product. Fair price. Thin cutting wheel can be used to free up stripped screws. Simply cut a deeper screwdriver slot in the steel or brass screw head. Cut a deeper slot in a steel screw head like butter.

I needed these discs to cut floor pans in my Camaro where I could not fit a full sized angle grinder and cutting wheel to make an accurate cut.These will cut 20ga steel, you can get a lot of detail and fine cuts suitable to weld. Though my rating is based on the quality, they are overpriced for what they are. Firstly I knew they wouldn’t last long, but it took nearly 4 discs to cut one floor pan. Compared to a 4” disc on a standard grinder, that will cut a car in half, but these are 4x the price.These are standard discs no different than cheaper alternatives, I would probably seek a cheaper off brand in the future.

They definitely get the job done. Although they are on the pricey side and the usable lifespan of each disc is very short. May want to order more than you think you will need.

I have had a dremel for several years and it often comes in handy when it is really the best tool for a certain DIY project. I use these discs for cutting metal and they do a great job and much more precise work than using a hacksaw. They do wear down over time but they get the job done and have made my DIY projects much easier. I recommend them.

The thin wheels did work but after doing the 2 spurs, the cutting wheel was done for. Next time I will try the regular and not the thin wheel.I placed the rooster's spur on a piece of tile and then I cut through the spur so as not to hit the concrete below.

The first set I ordered from Amazon all broke within seconds. I contacted Dremel and a reprehensive (Victoria) contacted me. She told me they've re-tooled and sent me a new set. Kudos to Dremel for caring about their customers!PREVIOUSLY: I'm very disappointed in Dremel! 15 to 30 seconds into a project the center would pop out of the disc. Every wheel in the package. 2 different projects. If this was a cheap knockoff imitation, I would understand, but not Dremel. Someone must have fallen asleep in their quality control department. I've been using Dremel EZ Lock cutting wheels and sanding discs since they first came out. So, I'm not a first time user. I usually wear them down to the hub, not have the disc just pop off. These are no good. Don't waste your money!

These work great at cutting almost anything. With the EZ-Lock Mandrel they come off and on in seconds. I've cut metal, plastic, wood and probably other things too.However they are not very rugged and can break quite easily if abused. If you use them with care you won't have a problem. But if you apply too much pressure you can crack them. If you lay the tool down, do not put anything on it or push on it as you can easily crack the disc. But once I broke one, I took more care after that and remove the disc from the mandrel when storing the tool and have not broken any more discs.The other problem is that they wear quickly. If you only occasionally need a disc cutter like this, it could last you quite awhile. Even with the quick wear, I still buy them because I can change to a fresh disc quickly and get the job done. If I am going to do a lot of metal cutting, I use metal cutting discs that mount to a different type of mandrel that secures the cutting disc with a screw. These are a lot cheaper but take more time to change discs.Overall though I still like these Dremel EZ-Lock discs and will continue to buy them. And if you have any problems or need parts for any Dremel tools, Dremel has one of the best customer service departments I have ever encountered. Don't buy imitations, buy Dremel.