Scosche CRTVW01 Compatible with Select 2009-2014 Volkswagen 26 Pin Camera Retention Harness

Worked well with my rcd330 that was added to a car that had the rns310. Picture is just as good as on the oem rns. Price is on the high side for this but I bit the bullet because I needed the backup camera for my daily life.I also didn’t feel like running the blue wire to the reverse lights to trigger it. I just connected it with the +12v yellow wire to 12v on the radio in. Now the adapter is hot when the car is on but when you run the rcd330 it only looks for the backup camera when you are in reverse so you are okay. This wire set up I did will not work on aftermarket radio set ups that use this blue trigger wire to signal to the radio to display the back up camera picture.

If you have a Volkswagen Jetta 2015 with a factory camera, it will not work. I got two different sets and nothing.

I have a 2014 VW Tiguan SEL with factory backup camera. The installation was easy, I chose to tie the blue wire to the Accessory wire from my wiring harness. The picture quality is not perfect, but it's passable. The guidelines from my backup camera were retained, if anyone with a 2014 Tiguan was curious.

My mechanic installed this, and just plain didn't work. He checked, and was getting good power, and signal from the rear camera, and this device just wasn't putting out a good signal to the harness. Going with his recommended all-in-one replacement harness.

Works like a charm. Once you find the blue and yellow are to be combined, then find your accessory wire. The image is not as sharp, but it's more than adequate, as the goal is not to read a license plate, but just to let you know that something is close behind.

Used this to connect an OEM backup camera to an RCD_330 radio in my 2015 Passat SE TDI. It was the third adapter I tried - the first two were suspiciously cheap and of dubious lineage. Wired this one up and it has been working fine for about a month now.Tracking down where I might find the reverse light wire within the dashboard area or running a wire all the way back to the trunk was a PITA, so I just wired the reverse light wire and the switched power wire together and the adapter runs whenever the car is on. Doesn't seem to have hurt anything.So glad to have a working backup camera again!

This product worked as advertised and was fairly easy to install, but the quality of the image was a downgrade, but that's the nature of the RGB to composite conversion. All said it's probably a better option to add a different after market camera, but if you don't want to do that this will work.

Worked perfect on my 2014 Jetta sport wagon