Didnt measured, but thet are flat shape not round.

Desertcart Logo

Q: Will a hand held torch be hot enough for that

I've tried everything when it comes to merging two pieces of aluminum with heat... TIG is by FAR the best.... these bernzomatic sticks are second. the cheap, crappy chinese ones where you get 50 for $15.00... don't waste your time, much less your money on them... The issue is the material... aluminum will go from a solid to a liquid quickly! It goes from liquid to gas even faster! So if you're working with thin aluminum and you wanna braze it. Use a $12.00 novelty butane torch with a wide flame! No pencil torches! Unless you just don't like the customer and you wanna waste some time watching your work piece disintegrate into nothing, lol... I mean, there's very little molten drip if any... it'll go from solid to gas in a blink... so heat the area evenly and make sure your bond it true by using a small pointed hammer, like a baby chip hammer made of brass! If your weld sux, it'll break free under light to moderate tapping. good luck! & GOD BLESS!

Q: Do you need to use an aluminum flux with this product ?

No i did not use flux it has some in it but you may need more flux if you work with it too long, i used it on A380 aluminum alloy and it was fine.And the shipping takes a longtime so if you can look for it at Homedepot sometimes they have it in stock.

Q: Rmark1083, thanks (off-center hole). problem solving through posting is so frustrating when limited/restricted to having real dialogue. need change??

I've seen were machinist has taken A threaded hole and cut the bolt off flush at the base and then center punch around the outer edges so that it doesn't move and then center punch the new true center and then drill and Tap it? Or even make the hole a lot bigger in order to use a larger bolt to accommodate the new hole to be drilled? Or even weld the hole shut in order to start over. It's been my experience that depending on the material you are working with that the welded approach can be very hard to drill back? High carbon steel. Hope this helps and good luck. Amazon asked if I could answer your question is mostly why I'm replying.

Entregar a Bolivia

Para la mejor experiencia Obtener la aplicación

Descargar la aplicación

Fuidamos elementos de

EAU
UK
India
EE.UU
Japón
KOREA

Servicios al cliente

Sobre nosotros

Soporte al cliente

Presupuesto

Manufacturer	Bernzomatic Corp
Part Number	AL3
Item Weight	0.704 ounces
Product Dimensions	2 x 0.2 x 14.5 inches
Item model number	AL3
Is Discontinued By Manufacturer	No
Size	1
Color	No Color
Material	Aluminum
Power Source	hand_powered
Installation Method	arc-welding
Item Package Quantity	1
Number of Handles	1
Included Components	Bernzomatic AL3 Aluminum Brazing/Welding Rods with 12-Inch Rods of Working Temperature 720-750 Degrees, 2-Piece
Batteries Included?	No
Batteries Required?	No
Warranty Description	Warranty

¿Tienes una pregunta? Mira lo que otros preguntaron

Will a hand held torch be hot enough for that

Do you need to use an aluminum flux with this product ?

Rmark1083, thanks (off-center hole). problem solving through posting is so frustrating when limited/restricted to having real dialogue. need change??

Are these 3/32

Trustpilot

Trustscore 4.5 | Más de 7,300 reseñas

Fátima A.

El mejor envío internacional que he probado. ¡Vale cada centavo!

Hace 3 días

Por Vikram D.

La funda MOLLE es de una calidad excepcional. Estoy muy satisfecho con mi compra.

Hace 2 semanas

Ver todas las reseñas de confianza

Compre globalmente, ahorre con Desertcart

Valor por dinero

Precios competitivos en una amplia gama de productos.

Compre globalmente

Sirviendo a millones de compradores en más de 100 países

Protección mejorada

Opciones de pago confiables que adoran los compradores de todo el mundo

Garantía del cliente

Opciones de pago confiables amadas por los compradores de todo el mundo.

Aplicación DesertCart

Compre sobre la marcha, en cualquier momento y en cualquier lugar.

Bs.823

Derechos e impuestos incl.

Boliviaalmacenar

Envío gratis

with PRO Membership

Devoluciones gratuitas

30 diaspara usuarios de membresía PRO

15 diassin membresía

Transacción segura

Trustpilot

Trustscore 4.5 | Más de 7,300 reseñas

Meera L.

Transacción sin problemas y el producto llegó en perfectas condiciones.

Hace 3 semanas

Fátima A.

El mejor envío internacional que he probado. ¡Vale cada centavo!

Hace 3 días

Ver todas las reseñas de confianza

Bernzomatic AL3 Aluminum Brazing/Welding Rods with 12-Inch Rods of Working Temperature 720-750 Degrees, 2-Piece

Descripción

Presupuesto

¿Tienes una pregunta? Mira lo que otros preguntaron

Preguntas comunes