Cable Raceway Kit, Stageek Cable Management System Open Slot Wiring Raceway Duct with Cover, On-Wall Concealer Organizer for Cable Pass to Hide Wires Cords for TVs, Computers - 9x15.4inch, Black

Got this raceway kit for an FRC team, building robots. It provides a quick and easy horizontal routing path for PWM, sensor, CAN bus, and some low current power supply wires. Vertical runs from source, or to destination, are fed perpendicularly into or from the raceway via the regularly spaced access fingers along the sides, which not only facilitates a neat and tidy control board appearance, but also helps (along with regular strain relief and cable tie down techniques) to reduce connectivity problems due to vibration and shocks in competition. For the size robots we build, we just need one section per robot, so with 9 sections we received a supply that should last us a few years. The raceway is easy to cut to the exact length required, most conveniently via tin snips or wire cutters before mounting, or even very carefully with a utility knife after mounting (in case you mistakenly leave it a little too long, as our team did!). Final length for this year's competition robot was 13-1/2". The volume capacity of this raceway is just right for the number of cables we needed to run - but everyone will have specific requirements that may vary - so be sure to verify that this raceway meets your volume needs. Easy to mount to using just the pre attached double stick tape, which has stuck tenaciously to our Lexan base. Raceway entry and exit for ribbon cables, jacketed cables, and individual wire bundles is a slam dunk. Fatter cables are readily accommodated by bending down (or cutting off) a raceway finger nearest the entry/exit point. The only less than perfect component is the cover - in a stationary application the fingers hold it on well enough, but where it is to be removed/replaced fairly often during building, and then subjected to various momentum forces, it requires a little more care to ensure the attachment recess engages the raceway side fingers along the entire length. Not a big deal, not enough to take off a star, but worth mentioning. We decided to see what happened "as is" during our first competition event, and found that the cover did remain attached. However, in our next event we will probably add a couple of encircling zip ties to guarantee the cover remains attached.

So, I got my hands on this cable raceway kit, and let me tell you, it's been a total game-changer! You know how it is—cables everywhere, a real mess. But these raceways? They're like magic. First off, they look super nice. Like, really modern and sleek. They totally blend in with my decor, which is a big plus. And the best part? They actually work! No more rat's nest of cables running across my wall. It's like they just disappear into thin air. The adhesive on these things is no joke, let me tell you. It's seriously sticky, but in a good way. Like, it holds everything in place like a champ, but it doesn't wreck your walls when you take them down. And speaking of holding up, these raceways haven't budged since I put them up. Not even a little bit. Since I got these raceways installed, my space feels so much cleaner and more organized. No more tripping over cables or trying to untangle a mess. Everything's nice and tidy, just the way I like it. Overall, I couldn't be happier with this cable raceway kit. It's made a world of difference in my office, and I'd recommend it to anyone looking to wrangle their cable chaos once and for all.

They're very effective for cable management and easy to use, but the adhesive doesn't stick as well as I would have expected. It's fine on a perfectly flat surface where it's not in any way porous (it won't stick to the raw edge of press board), but it didn't even stick well to metal bars on a monitor stand.

Bought these to hide those tangles of cables behind my computers. Comes in a box with 9 raceways stacked with double sided tape pre-taped to the back. Screws with anchors also included if you prefer. Like in the pictures, there are lots of holes along the sides for cables to come out wherever you want. There are multiple connectors for straight and 90 deg bends. The raceways are flexible but stiff plastic with two parts, the base and the flat top cover. The cover slides easily on over the track or can be clipped on. Like some of the reviews have said, the side holes are fine for cables of smaller diameter. 3 prong power cables for computers/monitors are a bit too thick to fit through easily. One reviewer said that they drilled it out with success, but since mine are behind my computer setup, I was fine with them coming out between or at the ends of separate tracks. Flexibility of the material lets you overstuff the raceways a little, and clip on the covers easily. The raceways are a little smaller than I was hoping - I have a 3 monitor setup so was barely able to get most of the cables (power, signal, ethernet, etc) into one trackway. On a 4 monitor setup I had to use 2 raceways stacked (which works just as well). The fact that they are flat topped and rectangular makes putting them side-by-side or stacked on top of each other a viable option. Just something to think about depending on your personal situation. Cannot comment on quality of the adhesive as I haven't used it. My cables keep the setup pretty stiff, and I'm not as concerned about keeping it fixed down. Overall really happy with how easy this was to get my cables looking good and under control.

Have not used it but already loving it. Gonna use it for my cable management for my desk and this is perfect. There are 6 short pieces which helps a lot in flexibility. There are 3 types of connectors, one for straight, one for 90 degrees vertically and one for 90 degrees horizontally. I love how it allows cable to come out as well. Will post more pictures of my finished setup. Stay tune! Edit: Managed to use all 9 pieces for my cable management project for my desk. Made my desk look so clean and nice. Felt that it could be a little narrow and too short if you have thicker cables and a lot of cables to fit. So if you have smaller size cables, this is perfect, otherwise its best to get something of a larger size. The holes are small as well, and once again, best suited for cables that are not too thick. Tip: plan out your cable managing for best result, your cable length, thickness, how the route should be. Overall very happy with the product. But my future problem will be the tape. It is too good, that if in the future, i want to change things up, i will have difficulty removing the tape. But that'll be my problem for the future.

Bon rapport qualité prix. Les plastiques sont de bonne qualité. L'adhésif également. Rien à dire.

The tracks were perfect for my new entertainment center. They fitted better than though they would. I used two kits of these on the back of the center to hide 99% of my ps4, computer, home theater receiver, cable box, ethernet switch and tv cables. It's easy to cut with a hacksaw and the double sided foam tape is very strong, I didn't need to use the included screws. The snap on covers and bendable and removable (with a razor blade) side sections can accommodate all of my high quality hdmi, audio, and, ethernet cables. I'm very happy with the results of these kits

Everything works better than expected and hides the cords really well. The adhesive work great, but make sure you line everything up perfectly as once it's attached it's nearly impossible to take off without damaging the adhesive or your desk. If you want to screw them into your desk instead, you'll have to drill through the plastic first which is what I did. It was super easy to do if you wanted to make sure it never came off. The cord holders do fill up quicker than you might think, especially if you have thicker power cables. I ended up running two holders parallel with one another and you can't even tell there's an additional holder there.

Arrived neatly packed in a box. Product is sturdy and versatile, was about to route cables on both the sides as well across the back of my desk. Adhesive was very strong too which held the weight of very thick cables.