Tenacity Turf Herbicide - 8 ounces (Packaging may vary)

I will share my experience with this product since there is not alot of scattered information regarding it, and I had to piece together information before using it. I have your typical Bluegrass, Fescue, Ryegrass lawn that is common here in the midwest. I noticed that my weed population (creeping charly, clover, knotweed, splurge) kept increasing despite my endless efforts to irradicate them. It wasn't until I started to rake the lawn that I realized I have an intruder that was creeping OVER the top of my existing lawn, and in a lot of cases it was intangled thru the existing grass. Raking had exposed the extreme difference in growth pattern, and there was an obvious difference in the length since it was growing from the center out. Once raked, it was like wiry arms waving hello above the regular grass! It was killing my good grass, making it sparse, and allowing these other weeds to invade. It forms a mat, so it was also trapping moisture underneath- creating lawn fungus for the good grass! I researched extensively, and found that I had nimbleweed and bentgrass. Ugh! Despite the price, I chose to use Tenacity and save the good grass. You have to be patient with this product, it does work, and despite it working slow, it is powerful stuff, so follow the directions since they are specific to the weed you are applying them too. For Bentgrass and Nimbleweed you want to apply 3 weaker applications instead of 2 stronger ones due to the aggressive stolons that bentgrass produces. After about 10 days you will start to see the nimbleweed and bentgrass dying back. It becomes more apparent after the 2nd application. It did cause whitening on my fescue, which does recover, and it did a little damage to my rye. I lived in fear for weeks worried that this stuff was gonna kill my whole lawn, but it didnt. It did reveal to me that I had much more Bentgrass than I had originally suspected (apprx 70% of my lawn). Once all the intruders were dead, I bought a good dethatching rake, and highly recommend one if you have areas that are thick with dead bentgrass. In the areas where the amount of dead bentgrass is thinner, you can just leave it and the regular grass should grow back thru. A bonus to this product, is you can overseed right after your very last application, and your new seedlings will not have to compete with weed seeds when trying to establish. Since this product kills alot of other weeds in the process, I have less weeds in my yard than I have ever had. My pre-existing lawn also seems healthier now, since it is not competing with the bentgrass and nimbleweed for sunlight, water, and nutrients. I did overseed the bare areas and have a new thick beautiful lawn coming in. I have no regrets using Tenacity, and will do a follow up application in the spring to hit any missed stolens that might still exist. Some recommendations- The product comes with a syringe so you can extract the chemical directly out of the bottle. Though I appreciated it being included, I found it difficult to use being the bottle is small, and I almost spilled it a couple of times due to the mechanics. Maybe try a measuring spoon instead. In order for this product to work, you MUST apply it with surfactant. I used Bonide Turbo Spreader Sticker (bought from Amazon also) and was pleased with the results. You can also mix Tenacity with a other chemicals listed in the instructions, so I mixed Triclopyr in the 1st application to help irradicate the creeping charlie. I would be hesitant to use this product in mid-summer when it is extremely hot, only because our cool season grass in the midwest is already struggling during that time. I waited til mid/late August when the temps would start to drop. Do not spray this on any other plants or trees, it will hurt them, and possible kill them. My only regret is that I wish I would have found this stuff sooner! I hope this post helps anyone trying to battle nimbleweed or bentgrass.

I have been trying for some years to identify and control the undesirable lawn grass called nimblewill. I thought it was Bermuda grass, which is similar, but it is somewhat different. The nimblewill has been slowly and consistently spreading and taking over my lawn for a number of years. It probably had taken about 20% of the lawn (about 0.7 acre lot). I thought it was pretty much hopeless. None of the lawn weed killers or crabgrass killers that don't harm the desirable grass will phase it. I thought I would have to roundup huge areas or most of the yard to get rid of it. The Tenacity is expensive, $60 or so for 8 oz. But for the number of gallons it makes (you use a syringe to measure it out, and it only takes about 1/2 teaspoon per gallon), it's really not that much more expensive than any other lawn herbicides or general vegetation killers for that matter. I have mixed and sprayed 22 gallons of the Tenacity, 2 gallons at a time, and I have only used about 1/3 of the bottle. I also used a surfactant, which is relatively any expensive and is supposed to increase the effectiveness. The Tenacity is a tanish, milky liquid. You don't want to get it on you. I was careful not to, but if I got just a minute drop of overspray on the skin, I could feel it burn. Anyway, I walked around and sprayed the all the visible nimblewill in various sections of the lawn 2 or 3 times during late June and early July, when it was actively growing in the hot weather. It was a little slow and time consuming, but it was effective, and I didn't waste the tenacity or over apply it. I tried to do it when it wasn't too hot or dry or right before rain, although I don't know if that matters . Anyway I walked around and hit the nimblewill in the all the different areas of the lawn at least once, maybe hit some bad places a second time. I sprayed some big patches, and many more isolated clumps where it was just starting to spread among the other grass. It is relatively easy to spot even when it is green and growing. It is blueish, low growing, and the grass leaves are flat and up to about 1/8" wide. I had no trouble spotting it among the desirable grasses when I was walking around spraying. At least 3-4 days after spraying, the leaves of the nimbewill grass start to turn white on the ends, then the whole upper grass leaf will turn white. Kind of unusual. It stays that way for a while. It stops growing and eventually it turns brown and dries up, but it takes several weeks for the whole kill process to complete, even in hot, relatively dry weather. But you can see results pretty soon, and continued results over time, and it's gratifying. It's hard to say if the other desirable grasses were harmed significantly or not, because it has been very hot and relatively dry. There is no obvious evidence of it, but some of the nimblewill patches were thick, meaning big brown spots, and some of the rest of the grass is turning brown anyway now due to heat and lack of moisture this summer, which is a little worse than normal. I plan to slit seed the whole yard closer to fall, so I don't really care if I lose a bit of desirable grasses to collateral damage or not. I am gratified just to see very little living and actively growing nimblewill at this point. Anyway, at this time or the summer, when it is usually thriving and will soon go to seed, I have very little green nimblewill in my lawn. I plan to make another pass or two soon and hit any more that I see that is still green. Bottom line with about 1/2 of a 8 oz. bottle this summer I realistically expect I will kill at least 85-90% of huge nimblewill infestation in a 0.7 acre lot. I will have plenty of Tenacity left to spot treat any I see for the next couple of years, and I expect to see a lot less each year. I have hopes of essentially eradicating it. They don't claim this is possible and say you can only "control" it, but I think with some diligence you can eradicate it for practical purposes. I also learned that the Crabgrass and weed preventers that are applied in the early spring help control nimblewill and keep it from spreading from seed. I had stop using these crabgrass preventers several years back because I had the crabgrass under control in my lawn. Not a good idea, because I think that helped allow the nimbelwill to spread uncontrolled and infest the lawn. Nimblewill goes to seed in the hottest, driest part of the late summer when you aren't mowing often. So you inadvertently allow the seeds to form and spread before they are mowed down. But I started using the crabgrass preventer again this spring, mainly to help control the spread of the nimblewill via seed, and I plan to continue using it as part of my efforts.

I hesitated at first to purchase Tenacity based on the cost. It first seemed outrageous to pay $75 for an eight ounce bottle of product, but I was out of ideas to stop the rapidly spreading bentgrass from taking over the lawn. It was cheaper than replacing the entire lawn so I pulled the trigger to purchase. Measuring the concentrate Tenacity was a bit of a challenge because it was thicker than other concentrates and required a syringe. Read the directions carefully and follow them exactly for mixing and application information. Tenacity is also highly toxic so you want to make sure you are wearing latex gloves and wear eye protection. Once mixed, I found it was easier to throw away the syringe than clean and reuse. We had plenty of others and they are easily obtainable from the pharmacy. The Tenacity mixed easily in a gallon sprayer and it was applied to the areas affected by bentgrass. It took a few days before noticing any results, but then is started to bleach the sprayed areas. This included bleaching the bentgrass along with the other grass. It appeared to impact the fescue more than the bluegrass. However, the bentgrass slowly died and was completely eliminated after a second spraying. The fescue remained bleached until it grew out and mowed but it never killed the other grasses like it did the bentgrass. Once killed, the bentgrass was safely removed and the areas reseeded with bluegrass. The bentgrass never returned thanks to the Tenacity. My advice for this product is to read and then reread the instructions before mixing or applying. Then be patient and give the product time to work. Your lawn will look terrible for a month with bleached spots, but it will kill the pesky bentgrass and the other grasses will recover. Fall is a good time to use since reseeding will be quicker during this time. I would recommend for anyone struggling with bentgrass in their lawn.

My wife and I bought an old farm house 4 years ago that was literally weeds and some sort of grass. Not being experts in grass, having lived in apartments in our previous years, we just figured "any grass is good". I spent 2 years getting rid of weeds using various sprays and granulars, then overseeding. As the overseeding began to take control of the lawn, and all the weeds were gone, I noticed that one type of grass stood out from the others and would go dormant at unexpected times. I did some research, which turned me into quite the grass geek, and found that I had both Nimblewill and Creeping Bentgrass. The only solution being offered on most sites was to use Roundup. I didn't find that to be a realistic solution. Finally, on one site I found a mention of Tenacity. While it is rather pricey (so it seems), I ordered it. Well, I can NOT tell you how happy I am with the results. While I knew it would whiten areas, I had no idea how much undesirable grass I had (Annual Bluegrass, Nutsedge, Nimblewill, Creeping Bent, Crabgrass, Barnyard Grass) until I sprayed it. Huge patches of my lawn turned white, making it VERY CLEAR which was a desirable turf grass, and which was not. At the same time, my turf type grasses stayed a solid green. I did the recommended spraying of 1 tsp, 1/2 tsp, 1/2 tsp. Between the second and third sprayings, I raked out the "dead" weeds and overseeded using some new topsoil, high end Turf Type Tall Fescue, and covering with a mix of compost and sphagnum. While this project took some time and exercised my patience, it was well worth it. I started in fall, and seeded in both fall and spring. It has filled in immensely, like a carpet. Deep green. My neighbor's yards are still all spotty and full of weeds/weedy grasses. Tenacity is both a pre and post emergent, which means it will keep the weeds down while you seed, as well as kill those that exist. The beauty of this product is that you can spray it directly on areas you just seeded. Few, if any, products can do that. I used a total of 3 tsp. on 1 acre and could continue to spray if I needed to. However, at this point, not a hint of weeds or weedy grasses. My lawn was comparable to a trailer park entry when we bought the place, and is now comparable to a golf course (in fact, I'd say mine is better than that of my favorite links). I highly recommend this product!

If you happened to stumbled upon this, I highly commend your efforts. If you're anything like me, you probably spent hours searching for a solution to bentgrass without having to kill off your entire lawn. I'll tell you what-- I love my lawn only behind Jesus and my wife-- and I was ecstatic to find Tenacity. Don't know if you love your lawn? Have you ever had your wife give you a look or audibly say 'What the hell are you doing?' while you picked through grass on your hands and knees at some ungodly time in the morning looking for those nasty invaders? You love your lawn. Anything else? Step up your game. The short version? The stuff works-- and very well. But here are some tips that, if followed, will greatly assist you in delivering that jealousy-inducing turf: 1. Be prepared with physical, emotional, and spiritual stamina-- because you'll be praying to God this stuff works. I say this mostly because it's a slow, starving selective herbicide. Don't expect burn off or RoundUp-like results in 24 hours. It won't immediately show results (the white grass as noted by others), and you'll need to make multiple applications. I found that three applications is best at 2-week intervals. 2. Use a surfactant. Don't want to buy the professional stuff? Squirt some Dawn or Ajax into the mixture, and it'll suffice. 3. Invest in a heavy rake (or dethatching rake). Rake out the bentgrass before you apply, and before you repeat applications. This will ensure that you're getting the best contact to the weed, as well as removing any dead stolons as you go. 4. If the only difference between your lawn and a golf course is the pin, just use RoundUp. You'll kill the root system much better. I had some patches that were so thick it could have been a putting green-- I decided to just kill those patches entirely and re-seed. 5. Cut the bentgrass nice and low with your mower, and bag it. You don't want to spread stolons across your good grass. Then mow at the highest setting that you can-- a healthy, thick lawn is a good defense from future growth. Yes, the syringe is difficult to use in the bottle (i'll probably struggle a bit when the level gets lower), but it makes measuring easy. Also, note that this small 8 oz bottle will create something like 60 gallons of herbicide. That's around a buck per gallon-- consider this to be a good long-run investment. You might also want to get a good backpack sprayer. I used a 4-gallon and it worked really well. Final details: I applied in July and August. Weather fluctuated, but was generally dry, with temps with highs in 70s and upwards of 90 during a hot spell. I live in West Michigan-- my lawn is about 2 acres of mostly tall fescue, but has mixes in different spots, pretty typical of midwestern lawns.

I bought two selective herbicides, tenacity & quinclorac. Our yard was recently expanded, and our existing lawn was impacted from the machinery, irrigation reno, and general foot traffic / stress. Given all that, crab grass sprouted through the existing lawn. Any pre-emergent barrier that was there was broken so here comes tenacity & quinclorac. I used quinclorac w/ MSO first on the larger crab grass patches and it worked well, but even with a dye in the mix I had missed spots. I read that tenacity bleaches the crab grass and thought that was a novel idea to not only kill the crab grass but help me to identify which patches i may have missed. I sprayed the tenacity with AO's surfactant, using dye as well to visually help, and let it get to work. Now I'll admit i was a bit more free in my spraying of the crab grass, often times fanning over larger areas of crab grass / healthy fescue/KBG. The first few days go by and the crab grass indeed did bleach out and began dying. However, about 7-10 days after that my healthy fescue/KBG began to bleach as well. I measured very accurately per the instructions, so I don't believe the mix was too hot. Another 7-10 days later, the fescue/KBG that was hit has died completely. I water my lawn regularly, and fertilize regularly (typically with milorganite). I wonder that perhaps the summer heat / sun was too much for the fescue/KBG grass, given the stress it was probably under from the tenacity spray. The end result, now about 3 weeks later, is that i have large patches of dead grass scattered throughout my lawn. I'm chalking it up to the summer heat/sun being the X factor, but man am i disappointed. TLDR; I'd be very cautious about when you spray this herbicide. I don't think the surrounding grass can withstand the stress this herbicide puts on it when coupled with hot summer heat / sun, i think it's just too much to handle. I didn't have issues with quinclorac and this situation, so i'm going to stick with that moving forward. As another reviewer said i'll stick to tenacity in our mulch beds, and quinclorac for the lawn. Lesson learned.

I have been using Tenacity now for around 6 straight years. It might not be the cheapest herbicide but it seems to work consistently every time. The package arrived as expected, it works well with other pre-emergents, and it doesn't harm my lawn. The volume you get from this bottle lasts me years with 4k sq/ft of lawn to treat.

Works as purported. I use to keep neighbor's centipede grass from taking over my lawn. 2 applications works best.