KAISH Chrome Guitar Roller Saddle Bridge Tune-O-Matic Bridge with Roller Saddles For Epi Les Paul,SG,Dot,Bigsby Guitar with M8 Threaded Posts

Perfect fit and finish on my Gretsch G5230t. Very easy to slip right onto stock bridge stud posts without bending or pounding. Excellent replacement part for this guitar at a low price. This roller bridges fits perfectly without hassle and looks like a professional job. This inexpensive roller bridges fits perfectly on this guitar. Be aware that much more expensive roller bridges do not fit nearly as well as this Kaish roller bridge. Spending more on a similar item, sometimes 5x as much, may not fit or sound as good as this one. A bird in hand is worth 100 in the bush. It also sounds very good and the guitar continues to sound super good, with greatly improved tuning stability.

Perfect pair. Fine tuning is so handy and it looks great. The roller bridge makes the strings play and sound better.

Decent piece for the price. If you're hesitant, go ahead with the purchase. Before you install however... pick up a "Good" #1 std. Screwdriver & Quality lubricant. Dry film (graphite) lubes are okay. I prefer liquid penetrants with white lithium personally. Generously lubricate the rollers and the intonation screws and run the saddles the full length of adjustment several times each to save yourself from binding later on. I put a strip of tape over the blade of the screwdriver to prevent falling or scratching the slots or finish of the screws. Be certain that no lubricant is left behind , use a cotton swab to reach difficult areas, so your guitars finish isn't adversely affected in any way. Installation went very smoothly on my Epiphone ES335 Pro and the bridge has performed flawlessly in the few months I've been playing with it. It is a fairly heavy unit cast from some zinc alloy but it isn't lightweight pot metal crap. It helped with setting intonation & keeping it locked in. It also has added quite a bit of sustain in combination with the tailpiece I installed. The bridge is tight on the posts in a good way, no slop or rattles and adjusts height wise easily also. Together they totally out-perform the stock bridge & tailpiece in every way. The finish is very nice as well. I dont see getting a better setup guess you want to spend a hundred bucks or more for a machined billet piece. I'm not all that convinced the difference would be any more than negligible but some audiophiles or highly technical full time professional musician may? notice a difference and invest for recording. I can think of better things to spend my cash on personally, like the graph tec ratio locking tuners I installed at the same time. Fantastic machine heads! I left a review there also. The important thing, imo is how it sounds to your own ear & whether you enjoy the sound, or not. For the price this isnt a huge gamble. Keep making your music friends it frees spirits and rescues souls.✌ P.S. the one star I knocked off because of the pre work I had to do. Alleycat

This was a drop in replacement for a vintage SG and it worked well, I liked that the screws were a perfect fit so I installed in 5 minutes. I did have a couple of stiff screw on the Kaish but just added a drop of 3-1 oil and worked back and forth to make sure all the screw adjusters were easy to adjust so no problem with the adjustments and it all seems to work great the quality is higher than I expected. I had to replace a harmonica type bridge, I was having tuning problems with the original I think it was because it was getting crusty and had metal corrosion even though I kept it clean and would use graphite to lubricate the string contacts it would go out of tune after a few songs of playing, now I have had it a couple of months I think there is a big improvement! it stays in tune and I even feel a slight improvement in the sound but that might be the intonation being more stable. I was going to replace the bridge with a Kluson Harmonica Tune-O-Matic Bridge but did not want to spend $130 right now, I am very satisfied with the KAISH at this time, I also bought a metallor tune-o-matic style guitar stop bar tailpiece both were a good choice to keep my SG in looking and sounding good. I will keep the originals and may see if they can be restored in the future. Good luck and good tunes!

Fit perfectly… intonation spot on looks great !!

Muy contento, muy buen producto por el precio. Solamente habría que tener cuidado con las cabezas de los tornillos al ajustar el quitado. Mejor aflojar un poco la cuerda y luego girar con más facilidad, no parecen muy sólidos. Por lo demás perfecto

Besser als die Original-Bridge von Epiphone, und das für diesen Preis, hätte ich nicht erwartet. Einwandfreie Intonation und Stimmstabilität. Passt bei Importgitarren ohne Umbau auf die vorhandenen Halterungen. Sitzt recht hoch, was aber kein Problem ist, wenn genügend Spiel an den Halterungen vorhanden ist. Rollen laufen locker und ohne Probleme, ich konnte auch keine Verschlechterung bei Sustain oder Tonqualität feststellen. Top Produkt!

El chapado es raterillo y se desgasta rápido,pero he conseguido que no se desafine la guitarra al tocar el bigsby, hace su función ,tengo una epiphone wildcat y encaja perfecto 👌🏻

Monté sur un kit Harley Benton à la place du chevalet de base. Aucun soucis de vibrations parasites, très content.

J'ai pris soin de bien regarder les dimensions avant l'achat Et celui çi s'avere être parfait, je n'ai pas du enlever les visses encastrées, juste poser le chevalet Je signale , qu'il faut une fois le chavalet poser et les cordes accordées regarder si l'action n'est pas un peu plus haute que d'habitude, pour ma part j'ai du descendre le chavalet . Sinon excellent