---
product_id: 22996063
title: "KB Electronics, 9520, KBAC-27D (Gray), 1.5;2HP, 1-Phase, 110-120V;200-240V (Input), Nema 4X Enclosure, Variable Frequency Drives"
brand: "kb electronics"
price: "Bs.10311"
currency: BOB
in_stock: true
reviews_count: 8
category: "Kb Electronics"
url: https://www.desertcart.bo/products/22996063-kb-electronics-9520-kbac-27d-gray-1-5-2hp-1
store_origin: BO
region: Bolivia
---

# KB Electronics, 9520, KBAC-27D (Gray), 1.5;2HP, 1-Phase, 110-120V;200-240V (Input), Nema 4X Enclosure, Variable Frequency Drives

**Brand:** kb electronics
**Price:** Bs.10311
**Availability:** ✅ In Stock

## Quick Answers

- **What is this?** KB Electronics, 9520, KBAC-27D (Gray), 1.5;2HP, 1-Phase, 110-120V;200-240V (Input), Nema 4X Enclosure, Variable Frequency Drives by kb electronics
- **How much does it cost?** Bs.10311 with free shipping
- **Is it available?** Yes, in stock and ready to ship
- **Where can I buy it?** [www.desertcart.bo](https://www.desertcart.bo/products/22996063-kb-electronics-9520-kbac-27d-gray-1-5-2hp-1)

## Best For

- kb electronics enthusiasts

## Why This Product

- Trusted kb electronics brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Description

KB Electronics, 9520, KBAC-27D (Gray), 1.5;2HP, 1-Phase, 110-120V;200-240V (Input), Nema 4X Enclosure, Variable Frequency Drives: desertcart.com: Industrial & Scientific

Review: Awesome piece! - Very easy VFD to wire up to my motor. Worked great for my grinder. Just need to come with all the toggle switches. I wired mine with Power on/off and forward/reverse toggle. Should come with.
Review: Love this VFD - This is the defacto standard VFD for small horsepower three phase motors used in harsh locations as no extra packaging, cooling or enclosure is required. Simply, wire and go. For my 9" disc grinder I am powering a 1.5 hp motor and supplying the VFD with a single phase 120 Volt 20 Ampere circuit. No problems. Easy to operate and sealed up tight against water and dust. The base unit comes without a main power switch and without a FWD/REV switch. These can be purchased additionally and installed if required for your application. To get your power in and out, you will need some cable glands (strain reliefs) to let the cords through and still keep the unit sealed. The size of the glands will depend on the diameter of the cord you are using. Check the outer diameter of your cords before buying glands. The bottom of the VFD has has two 1/2" knockouts and one 3/4" knockout. (1/2" and 3/4" being conduit sizes not actual diameters of the knockouts.) Two rubber plugs are provided as well. There are a few adjustments that can be made inside the VFD, jumpers and trim pots on the board. KB provides a neat little trim pot screwdriver in case you need to tweak things like acceleration or deceleration time. Jumpers are installed for changing the supply voltage, motor horsepower etc. If you want to run a 2 hp motor, you will need to supply the VFD with 240 V single phase, otherwise it is rated for 1.5 hp at 120 V.

## Technical Specifications

| Specification | Value |
|---------------|-------|
| ASIN | B01AOCLIEU |
| Best Sellers Rank | #200,944 in Industrial & Scientific ( See Top 100 in Industrial & Scientific ) #195 in Motor Speed Controllers |
| Date First Available | January 15, 2016 |
| Is Discontinued By Manufacturer | No |
| Item Weight | 9 pounds |
| Manufacturer | KB Electronics |
| Product Dimensions | 3.94 x 3.94 x 3.94 inches |

## Images

![KB Electronics, 9520, KBAC-27D (Gray), 1.5;2HP, 1-Phase, 110-120V;200-240V (Input), Nema 4X Enclosure, Variable Frequency Drives - Image 1](https://m.media-amazon.com/images/I/710kunqzNLL.jpg)

## Customer Reviews

### ⭐⭐⭐⭐⭐ Awesome piece!
*by J***R on December 2, 2025*

Very easy VFD to wire up to my motor. Worked great for my grinder. Just need to come with all the toggle switches. I wired mine with Power on/off and forward/reverse toggle. Should come with.

### ⭐⭐⭐⭐⭐ Love this VFD
*by D***S on June 11, 2018*

This is the defacto standard VFD for small horsepower three phase motors used in harsh locations as no extra packaging, cooling or enclosure is required. Simply, wire and go. For my 9" disc grinder I am powering a 1.5 hp motor and supplying the VFD with a single phase 120 Volt 20 Ampere circuit. No problems. Easy to operate and sealed up tight against water and dust. The base unit comes without a main power switch and without a FWD/REV switch. These can be purchased additionally and installed if required for your application. To get your power in and out, you will need some cable glands (strain reliefs) to let the cords through and still keep the unit sealed. The size of the glands will depend on the diameter of the cord you are using. Check the outer diameter of your cords before buying glands. The bottom of the VFD has has two 1/2" knockouts and one 3/4" knockout. (1/2" and 3/4" being conduit sizes not actual diameters of the knockouts.) Two rubber plugs are provided as well. There are a few adjustments that can be made inside the VFD, jumpers and trim pots on the board. KB provides a neat little trim pot screwdriver in case you need to tweak things like acceleration or deceleration time. Jumpers are installed for changing the supply voltage, motor horsepower etc. If you want to run a 2 hp motor, you will need to supply the VFD with 240 V single phase, otherwise it is rated for 1.5 hp at 120 V.

### ⭐⭐⭐⭐⭐ Fantastic unit!!
*by R***. on May 5, 2019*

The KBAC-27D is a really nice unit. It arrived in 2 days with prime shipping. Packaged really well with an expanding foam insert to hold it in place while in transit, which is good because it is much larger, and heavier than expected. The pictures don’t do it justice. The housing is a really well built aluminum casing that is well sealed, but still easy to open for making connections inside. 80% of the rear or the box has molded-in cooling fins. I purchased this to run an older Bridgeport series 1, step pulley, with a 1hp motor. I was able to get things hooked up in about in hour, using waterproof service cord connections in the 1/2” knockouts in the bottom of the box. It’s a really nice layout that makes for a super clean install. Once everything was connected, I plugged it into 220v single phase power, and let it sit for an hour to charge the capacitors as recommended by the manufacturer. Then crossed fingers, set the potentiometer to 50%, power and fired the machine up. Victory! My 63 year old Fairbanks/Morse motor whirred to life. This unit is awesome. Easy to wire, Intuitive to use, and looks like it’s built to last. I’m so glad I paid a little more for this well built, analog VFD, rather than all electronic import that has tons of menus, and controls. A week later, I also installed the accessory reversing switch. It installs super easy, and works flawlessly. Overall, I’m super happy with the KBAC-27D!

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.bo/products/22996063-kb-electronics-9520-kbac-27d-gray-1-5-2hp-1](https://www.desertcart.bo/products/22996063-kb-electronics-9520-kbac-27d-gray-1-5-2hp-1)

---

*Product available on Desertcart Bolivia*
*Store origin: BO*
*Last updated: 2026-03-13*