---
product_id: 570262531
title: "Manta M8P V2.0 Integrated Control Board 32Bit Running Klipper with CB1, High Speed 3D Printer Motherboard, Compatible TMC5160T Plus,TMC5160,TMC2209,TMC2240 Stepper Driver (Without CB1)"
brand: "bigtreetech"
price: "Bs.1973"
currency: BOB
in_stock: true
reviews_count: 13
category: "Bigtreetech"
url: https://www.desertcart.bo/products/570262531-manta-m8p-v2-0-integrated-control-board-32bit-running-klipper
store_origin: BO
region: Bolivia
---

# 550MHz Cortex-M7 core Multi-voltage fan control (5/12/24V) 10A hot bed max output Manta M8P V2.0 Integrated Control Board 32Bit Running Klipper with CB1, High Speed 3D Printer Motherboard, Compatible TMC5160T Plus,TMC5160,TMC2209,TMC2240 Stepper Driver (Without CB1)

**Brand:** bigtreetech
**Price:** Bs.1973
**Availability:** ✅ In Stock

## Summary

> 🚀 Elevate your 3D printing game with the Manta M8P V2.0 — power, precision, and flexibility in one sleek board!

## Quick Answers

- **What is this?** Manta M8P V2.0 Integrated Control Board 32Bit Running Klipper with CB1, High Speed 3D Printer Motherboard, Compatible TMC5160T Plus,TMC5160,TMC2209,TMC2240 Stepper Driver (Without CB1) by bigtreetech
- **How much does it cost?** Bs.1973 with free shipping
- **Is it available?** Yes, in stock and ready to ship
- **Where can I buy it?** [www.desertcart.bo](https://www.desertcart.bo/products/570262531-manta-m8p-v2-0-integrated-control-board-32bit-running-klipper)

## Best For

- bigtreetech enthusiasts

## Why This Product

- Trusted bigtreetech brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Key Features

- • **Robust Power Delivery:** Support up to 10A on the hot bed and 6A on heating rods to fuel high-demand printing setups without overheating.
- • **Seamless Firmware Upgrades:** Easily update MCU firmware via SD card or DFU with Klipper’s make flash command—future-proof your printer effortlessly.
- • **Blazing Fast 32-bit Performance:** Harness the power of a 550MHz ARM Cortex-M7 chip for ultra-responsive 3D printing control.
- • **Versatile Fan & Sensor Integration:** Customize cooling with selectable 5V/12V/24V fan voltages and connect advanced sensors like BLTouch and material break detection.
- • **Comprehensive Connectivity & Expansion:** Multiple interfaces including SPI, UART, RGB, I2C, and proximity switches empower endless customization and smart automation.

## Overview

The BIGTREETECH Manta M8P V2.0 is a high-performance 32-bit 3D printer control board featuring a 550MHz ARM Cortex-M7 processor, robust power outputs (up to 10A for hot beds), and versatile multi-voltage fan support. Designed for advanced users, it supports Klipper firmware with easy firmware upgrades, extensive sensor and expansion interfaces, and compatibility with popular stepper drivers like TMC5160 and TMC2209. Ideal for professional-grade and custom 3D printer builds, it offers unmatched flexibility and reliability.

## Description

BIGTREETECH Manta M8P V2.0 integrated Control Board Additional Product Features 1. The main board reserves BOOT button, can update the motherboard boot program through DFU; 2. Increase protection circuit of the thermistor to prevent the control chip from burning due to leakage of the hot bed or heating rod; 3. The 24V, 12V, 5V voltage of the CNC fan is optional, which saves the operation of external transformer module, thereby reducing the probability of damage to the motherboard; 4. The MCU firmware can be upgraded through SD card, or the MCU firmware can be updated through DFU through Klipper's make flash command; 5. On-board TMC-driven SPI and UART working modes, on-board DIAG function pins, can be used by simply plugging and unplugging the jumper cap; 6. Support material break detection, shutdown, BLTouch, RGB lights and other functions; Product Parameters 1. Logic voltage: DC3.3V 2. Drive input voltage: 24V, HV (24-60V) optional 3. Mainboard input voltage: VIN=DC12V or DC24V 4. Hot bed input voltage: BED IN=DC12V or DC24V 5. Heating interface: hot bed (HB), heating rod (HE0,HE1,HE2,HE3) 6. The maximum output current of the hot bed port: 10A, peak value 10.5A 7. Maximum output current of heating rod port: 5.5A, peak value 6A 8. Fan interface: 5-way two wire CNC fan (FAN0, FAN1, FAN2, FAN3, FAN4, Pi FAN), 2-way four wire CNC fan (FAN5, FAN6), 1-way normally open fan. The CNC fan voltage (5V, 12V, 24V) is optional; 9. Maximum output current of fan interface: 1A, peak value 1.1A 10. Total current of heating rod + driver + fan: less than 12A 11. Temperature sensor interface: 5 channels of 100K NTC, 4 of which are optional ports for NTC and PT1000 12. Display: Serial touch screen, SPI touch screen, LCD display 13. PC communication interface: Type-C 14. Support machine structure: Cartesian, Delta, Kossel, Ultimaker, CoreXY

Review: LOVE this board - Absolutely love this board. Incredibly versatile, incredibly powerful. I have this set up with a CB1 and 2209s, everything works great. The manual does a good job at pretty much covering everything, albeit, not phrased the best. Nonetheless, super flexible board for endless possibilities. Love all of the fan controls, stepper driver options, UART mode, DIAG for sensorless, USB, ethernet, etc etc. It truly covers everything for a potentially awesome and big build. I see some reviews talking about "I thought this would include grub screws", or "Doesn't run the printer on USBC power", and - cmon people, it's a controller board. It includes JST connectors, which I wasn't expecting, so that's awesome. And USB C power? I understand a laptop, but you're running 24v heaters and motors, controller, etc, how would this work over USBC? There's no where they mention you can RUN this board with USBC. Like people, do a little digging! Yes, you can use USBC to program and config, it won't power fans, motors, heaters, etc, it's enough power to program things before setting things up. And that makes sense. Regardless, great board, I've been very excited about using it, and it's been fine configuring and optimizing things for my build. New found love for BigTreeTech
Review: Solid upgrade from CB1 with active development. - This is a great upgrade from the CB1. While I haven’t tested it with webcam decoding/encoding, it logically outperforms the CB1. I’ve have it running on a BTT Manta EZ3D, and it runs smoothly without issues. The GitHub page for the Kllipper image is actively maintained, which is a big plus—thanks to BTT for keeping the community supported!

## Features

- BIGTREETECH Manta M8P V2.0 Control Board uses 32-bit ARM Cortex-M7 series STM32H723ZET6 main control chip with a core frequency of 550MHz. High efficiency MOSFET for less heat generation
- The power chip of Manta M8P V2.0 integrated main control board adopts TPS5450-5A, which supports DC12/24V power input; the output current of this chip is up to 5A, and the peak value can reach 6A, which perfectly supports the power supply of Raspberry-Pi
- The control board and the core board use BTB connection method, so that other core board solutions other than CM4 can be selected, such as BIGTREETECH CB1. The mainboard reserves the SPI expansion interface for using the Klipper firmware to connect an external acceleration sensor for acceleration compensation
- The thermistor can select the pull-up resistance value through the jumper, which supports PT1000 without external modules, which is convenient for DIY use; the control board reserves a three-way four-wire fan interface, which can be used to connect a water cooling device
- The MCU firmware can be upgraded through SD card, or through DFU through Klipper's make flash command; the main board reserves the proximity switch interface, supports NPN and PNP type selection, (24V, 12V, 5V) voltage optional, shared with VFAN6 Voltage selection
- BIGTREETECH Manta M8P V2.0 reserves rich installation interfaces: material breakage detection, shutdown after completion BLTouch、RGB、I2C、 Servo interface, 5V power-off detection, three-way four wire fan interface, proximity switch interface, SPI expansion interface. And annotate in detail in the display image, you can connect to your 3D printer according to the corresponding annotations.

## Technical Specifications

| Specification | Value |
|---------------|-------|
| ASIN | B0CHFJYM5N |
| Best Sellers Rank | #48,414 in Industrial & Scientific ( See Top 100 in Industrial & Scientific ) #5 in 3D Printer Controllers |
| Date First Available | September 6, 2023 |
| Item Weight | 10.8 ounces |
| Item model number | KINGPRINTER-1020000442 |
| Manufacturer | BIGTREETECH |
| Operating Temperature | 20 Degrees Celsius |
| Package Dimensions | 8.19 x 5.55 x 2.05 inches |

## Product Details

- **Brand:** BIGTREETECH
- **Color:** black, white
- **Display Type:** touchscreen or LCD
- **Item Weight:** 0.31 Kilograms
- **Material:** PCB

## Images

![Manta M8P V2.0 Integrated Control Board 32Bit Running Klipper with CB1, High Speed 3D Printer Motherboard, Compatible TMC5160T Plus,TMC5160,TMC2209,TMC2240 Stepper Driver (Without CB1) - Image 1](https://m.media-amazon.com/images/I/812s-MskDxL.jpg)

## Customer Reviews

### ⭐⭐⭐⭐⭐ LOVE this board
*by J***T on October 28, 2023*

Absolutely love this board. Incredibly versatile, incredibly powerful. I have this set up with a CB1 and 2209s, everything works great. The manual does a good job at pretty much covering everything, albeit, not phrased the best. Nonetheless, super flexible board for endless possibilities. Love all of the fan controls, stepper driver options, UART mode, DIAG for sensorless, USB, ethernet, etc etc. It truly covers everything for a potentially awesome and big build. I see some reviews talking about "I thought this would include grub screws", or "Doesn't run the printer on USBC power", and - cmon people, it's a controller board. It includes JST connectors, which I wasn't expecting, so that's awesome. And USB C power? I understand a laptop, but you're running 24v heaters and motors, controller, etc, how would this work over USBC? There's no where they mention you can RUN this board with USBC. Like people, do a little digging! Yes, you can use USBC to program and config, it won't power fans, motors, heaters, etc, it's enough power to program things before setting things up. And that makes sense. Regardless, great board, I've been very excited about using it, and it's been fine configuring and optimizing things for my build. New found love for BigTreeTech

### ⭐⭐⭐⭐⭐ Solid upgrade from CB1 with active development.
*by B***N on May 7, 2025*

This is a great upgrade from the CB1. While I haven’t tested it with webcam decoding/encoding, it logically outperforms the CB1. I’ve have it running on a BTT Manta EZ3D, and it runs smoothly without issues. The GitHub page for the Kllipper image is actively maintained, which is a big plus—thanks to BTT for keeping the community supported!

### ⭐ Not easy.
*by A***6 on October 7, 2025*

Not easy at all. Cannot get to work. Returning

## Frequently Bought Together

- BIGTREETECH Manta M8P V2.0 Integrated Control Board 32Bit Running Klipper with CB1, High Speed 3D Printer Motherboard, Compatible TMC5160T Plus,TMC5160,TMC2209,TMC2240 Stepper Driver (Without CB1)
- BIGTREETECH TMC2209 V1.3 Stepper Motor Driver, 2.8A Ultra Silent Stepsticks Supports UART/Step/DIR Mode for Octopus V1.1/Octopus Pro/Manta M4P/M5P/M8P/SKR V1.4 Turbo/SKR 3 Control Board 6Pcs
- BIGTREETECH CB2 Customized Heat Sink Designed for The CB2, Manta M8P/M5P/M4P, Manta E3EZ Control Board Compatible with 4010 Fan (ONLY Heatsink)

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.bo/products/570262531-manta-m8p-v2-0-integrated-control-board-32bit-running-klipper](https://www.desertcart.bo/products/570262531-manta-m8p-v2-0-integrated-control-board-32bit-running-klipper)

---

*Product available on Desertcart Bolivia*
*Store origin: BO*
*Last updated: 2026-02-07*