Pyramid 1” Audio Car Tweeter Speaker - 3.25” Bullet Horn Aluminum Die-Cast Titanium Dome, 300 Watt Peak, 2k-25kHz Frequency Response, 4 to 8 Ohm, Heavy Duty 20 oz. Magnet Structure - 1 Pair TW18BK,BLACK/RED

I was surprised how good these sound. I have the tweeters sitting on top a old pair of Realistic Minimus 7s pointing up 6 feet apart and the make a perfect stereo image right in the middle. The clarity and definition is very nice. I am pushing them with signal coming out of my laptop into a tube headphone amp into a 10 watt chinese class D integrated amp . Humble equipment and to make it even more complicated a pair of creative ball speakers the that plug into the computer for power and into the headphone out put . I used a splitter to get the signal into two different systems . The creative ball speakers are like mini sub woofers. I sit right in front of it all with my laptop so i do not not need room filling sound. I might actually put them in cabinets eventually.

Performs very well, better than the supper tweeter being replaced in an expensive 4 way Onkyo tower speaker (8 ohms 150 watt). The original supper tweeter blew out in the right tower, and I replace that first so I could compare it to the original Onkyo supper tweeter still good in the left tower. The Pyramid definitely stood out over the original in the other tower, so I went ahead and replaced that one, too. I had to drill the hole slightly larger, so I preferred not to do it if there was no discernible improvement, but there was, so I invested the time and installed both right and left Pyramids. It gave new life and better volume (no doubt the bigger magnets) to the super highs in the 1992 vintage Onkyo towers. Especially to cymbals, triangles, and flutes in classical music. I'm glad the original super tweeter blew out, now. Very pleased at the improvement, and no complaints on the price. PS: The towers have their own crossovers so I snipped off the small crossover that came soldered on the Pyramid terminal, as it was not necessary.

I’m in the process of restoring the interior in my 1970 El Camino. When I removed the dash I discovered 2 tweeters that I did not know were there. After I found them to be bad, I ordered these from Amazon. These are Pyramid brand which totally blew my mind when I opened the package. I had no idea Pyramid was still around. Back in high school, we’d buy Pyramid speakers for our cars from the local swap meet. Since they were lower budget, they’d blow and then we’d just get more at the swap meet. I’m happy with the sound of these and greatful for the quick trip back to 1994 I can’t figure out if these are home or vehicle but am leaning towards vehicle. Word of warning, the magnets are pretty beefy.

It is not clear to me if an individual tweeter is 4 ohms or 8 ohms. It has 4/8 ohms written which may indicate 4 divided by 8 for all we know. As many have reported it is very harsh sounding. This may be because it is an efficient speaker and I can guess that if is a 4 ohm speaker, then it is far over powering to the woofer and/or mid-range. The correct way to attenuate this tweeter is with an L-pad. An L-pad is a simple circuit consistining of two resistors. There are websites to help with this if we only knew what the value for its impedance. It looks like I am going to build two L-pads with one using 4 ohms and the other using 8 ohms. I believe that this tweeter is made to be used in a car’s audio system. It sounds much to bright for a home stereo. I had a couple woofers taking up space, so I am putting together a keyboard/guitar/microphone speaker. I hesitate to call it a studio monitor, but that would be what I would look for if I wanted to upgrade. I am using a crossover frequency of 2,200 Hertz which accerbates the harshness of the tweeter. The lack of pertinent information is the reason I give it three stars. It is relatively inexpensive.There were two tweeters in the box I received.

Speakers are perfect fit and nice product

Music in my car started to get dull. I said I will give these a shot. I had the gray version of these that I purchased 4 years ago. Time for an upgrade. Flush mounted in my door and all I can do is smile. They are bright and clear. I hear sounds n my music that's beeb missing. Built solid. They come with a bass blocker but still keep bass from reaching them and don't over power they will last a long time. You won't be disappointed. I can barely hear my power acoustik nb-2 tweeters now

These tweeters are phenomenal. They're bright, loud, and large! I don't think I'll ever go back to a 1" tweeter again.I installed these in a 1998 Chevrolet K1500 pickup, initially with the hopes of putting them in the stock location of the tweeters; however, due to the large size of these tweeters, there was no way I could make them fit. I improvised and put them just below the door and window controls. About 3.5" to the right and 3.5" from the top. Check my photo in the customer images for the exact location.I'm running the tweeters off of the crossover that came with my PPI 6.5's components so I did not need the required bass blocker. They're paired with the mids from the PPI 6.5s and two Sundown Audio SA-8 V.2's. (8-inch subwoofers)My only complaint about the tweeters is that they come with solder already on the tabs, which I was not going to use with my application this made it pretty difficult to put the quick connect wire terminals on until I removed the solder. So desoldering the tabs added a few extra minutes to the installation. Some options for removing the solder if you're like me and not going to be using them is to desolder them with an iron, sanding the solder off with sand paper, or using a file to file off the solder.

I will be buying more of these! they sound great and are reasonable in cost!