QTEATAK 2Pcs PCIe NVMe M.2 2280 SSD Heatsinks Cooler & Mounting Screws Screwdriver Kit…

If you're building PCs with used parts, these are a neccessity. They look good, fit well and are built well and don't strip as long as your not tightening them like a gorilla. Works with Machinist, MSI, Gigabyte and Asus boards. Keeps temperatures down. I didn't use the included rubber bands because they are going to rot and break so I dug into my O-ring kit and used O-rings which will take longer to break down. Nice low profile so if your SSD is under your GPU it will still fit behind it and not hit the GPU.

Has a low-profile heatsink of aluminum, sized for a 2280 M.2 SSD. Plenty of spacers and screws and a great little phillips screwdriver (magnetized) to install those little SSD screws. Has silicone thermal pads to conduct heat to the heatsink. Even has little rubber bands to hold the heatsink to the SSD (even though they all broke when trying to wrap around the assembly). Everything was x2, so I have spares for future SSD's. Good Value for the $

Works as intended, I do wish the rubber bands are black to match the heatsink.

such a good bargain. two sets of heat sinks for $7....can't beat that. I wasn't sure if it would be any good but I figured what the heck and give it a try. I put it on my m.2 gen4 samsung and ran some tests. running some speed tests of 5 iterations of 32GB read/write I was getting 69 degrees stock and with the heat sink I got 63 degree so I dropped temps by 6 degrees under heavy use. Very easy to install and the, don't know how long the rubber band will last but so far so good. Its nice that it came with screws also cause I really needed them.

Perfect for my computer needs

I ordered this primarily for hold down screws for an M.2 NVMe drive, but for the great low price also got some spare parts. The heatsink and thermal pads fit nice, keep the temperatures down (which is important with NVMe SSDs for drive longevity) and the whole kit was worth every penny.

I was short on screws for mounting an M.2 SSD, and ended up with this kit instead of just screws - because a little extra heat sink on recent large SDDs is never a bad idea.The blue heat transfer sticky pad is not that sticky, but it does not need to be due to the bands; and might save you if you apply it wrong. It's not a disaster to take it off and reapply.This kit does not dissipate heat from the back side of the SSD, but that is likely not needed in many cases unless you have an unusual build or possibly a hot console.I used both sets, would order this again.

Arrived promptly; all the parts were included. But the spacer and the mounting screws were the wrong size for me, so including the screw sizes would be a help.Fwiw, I was trying to replace missing (and likely, propriety design, odd sized) screws for an SKK external, not a motherboard. Haven't used the parts yet, but I intend to save them for later. Nothing wrong with the kit, just not for my unit.