WORXMAKERX WX743L.9 20V Mini Heat Gun (Tool Only)

Update (3/20/21): Used the heat-gun and soldering iron to connect a 24/12v converter to a battery bank via a 4-port terminal block.Summary: I have had rotary tools long enough to remember when the first real accessory for a Dremel was the extension shaft. This is similar in that you have relocated the power source away from the part that you hold, resulting in a lightweight tool.Previously reviewed the WX739L Rotary only tool combo (there is video in the link below):https://www.amazon.com/review/R3HSAXMQJGSDVS/ref=pe_1098610_137716200_cm_rv_eml_rv0_rvObservations:1) To test the rotary grinder (Dremel equivalent), I used the included 3/4" cut-off wheel, and cut a 1" section off from a 3/32" thick curtain rod bracket. Additional detail in that review.2) Next I looked at the Angle Grinder. The 2" disc should be sufficient for most small tasks, and would excel at bolt/round stock cut off. I like that the motor is brushless, as that is then newest technology, which makes for more efficient and cooler running. You can really dial the speed down very slow, which I showed in the video.3) Lastly, I tried the soldering iron. Having soldered things just about my entire life, I was really looking forward to this; however, the temperature seems very low, relative to what the digital read out indicated. It does heat up quickly, and adjusts back down relatively quickly. I need to test this further, so for now I'm rating it fair. One thing to note, you'll probably need to increase the heat much higher than indicating.Recommendations:1) These systems of tools really makes economical sense when you have many of them. This MakerX combo has the rotary tool, angle grinder, and soldering iron, and they also offer an air brush. I'm sure they intend to release more tools. The 20v Power Share is also compatible with many Worx 20v tools also. The heat gun is the only one sold separately, not as part of any combo. I intend to buy the mini heat gun; the reviews are fair, not great, but I would much rather use a mini heat gun than a lighter to shrink heat wrap.2) For the angle grinder and soldering iron accessories, I used a 2-compartment Sistema container (link below), and added some foam to hold the bits from rattling around; I think it turned out really well. Drops right inside the bag, and all the little bits are there at your fingertips.Pros: Good fit & finish; brushless motor (rotary and angle grinder); 20v Power Share family of tools; includes a tool bag.Cons: A bunch of warning & caution stickers; soldering iron isn't super hot.Conclusion: At $170 for this set, I rate this 5-stars, and I would recommend this WX991L set over the smaller/lower cost offerings (like the rotary only for $100). Spend a little time to see which kit would be suit your needs and budget.Related Products:WORX WX992L 20V MAKERX 2Pc Combo Kit - Rotary Tool + Air Brush - $130https://www.amazon.com/WORX-WX992L-20V-MAKERX-Combo/dp/B08KFNF8MYWORX WX739L MAKERX Rotary Tool Kit - $95https://www.amazon.com/WORX-WX739L-MAKERX-Rotary-Tool/dp/B08KF1LKMQWORX WX743L.9 20V MAKERX Mini Heat Gun - Hub, Battery and Charger sold separately - $30https://www.amazon.com/WORX-WX743L-9-MAKERX-Mini-Heat/dp/B08KFMJTJVSistema 11.8 Ounce Small Split Storage Container (Colors may vary) - $6https://www.amazon.com/gp/product/B00BQGS09A

I can't wait to get all the parts. I needed a new Dremel when I found this and decided to give it a try, not this heat gun attachment but the main piece and rotary tool, but you need that main piece to use this. The heat gun works great for what I need. Blowing resin, melting plastic sheeting to wrap items. It's much better than the hair dryer I've been using. I don't have another heat gun to compare to. It fits my needs perfectly. I have 4 pieces now, working in getting the rest.If you need this for lightweight heat gun uses, I totally recommend. People that used breast guns for heavy duty purposes have some complaints, I have seen those reviews on YouTube, but for a hobbiest, like me, it's perfect.

Perfect addition to my Worx MAKERX tool kit. This heat gun is very compact but it deliver a whole lot of heat. Heats up very fast and is very easy to handle. I used it to heat up my KYDEX holster so I could mold it to my pistol… worked perfectly. Also, excellent when working with heat-shrink tubing. Highly recommend.

I find it a good tool for low heat needs like heating up sticky/gummy residue, heat shrink in electrical and electronics, drying up small painted or wet areas, etc...

I’ve always liked WORX tools and have quite a few of them, quality is always good and fair prices.Initially I was looking for a full size rechargeable heat gun but price and quality didn’t appeal to me. Then I came across the WORX line.I’m very impressed with quality and performance of the heat gun.The fact that it’s lightweight and I can take it outside without worrying about a power cable is great.It’s bigger than I expected and works really well.I will be adding more of these hobby tools in the future.

I am loving this new heat gun! I don't have a ton of experience with 'power tools' and this is SO easy to use. It heats up with a zero wait time, has a nice shape for the hand-held aspect and I love how easy it is to use with the interchangeable battery. I first used this for the project seen above - hand-lettered wood ornaments with the a scorch pyrography marker (and a cute wood door hanging sign). Super super easy, and I love how they turned out. Excited to use it for embossing & other crafts!

I've purchased most of the tools in the Worx Maker X family. The concept of an interchangeable tools on a single controller and battery really intrigued me, primarily for use aboard an older sailboat where projects are always on tap. My usage is probably a little more than Worx intended for the Maker X system, but since I already had a number of Worx tools and batteries I decided to give the tools a try. So far, I would rate the scores of the devices from a two to a five in utility and functionality. The heat gun falls right in the middle. It is useful, but in a pretty limited manner. Running on a battery, it struggles to produce a high level of heat output. It will shrink heat sensitive tapes, but slowly. It will allow you to shape some plastics, but PVC pipe is mostly a bridge too far. Stripping paint is possible, but your progress will be very slow, though it does work okay in small tight areas. Battery life is not bad, though the heat gun, as you would expect, will deplete the battery fairly quickly. All in all, I am happy enough with the purchase, but when it comes to the heat gun my enthusiasm is a bit muted. I did have to contact customer service to replace a bad controller and my experience was positive.

I prefer not being tethered to a wall outlet so this was handy though definitely more expensive than a traditional heatgun. It’s not entirely “wireless” though. It still plugs into the maker x block though I can pop that into my pocket while working with this. It heats up quite quickly which is great too. I recommend it but really only if you need to be untethered and are already using maker x accessories.