Claiks Electric Standing Desk, Adjustable Height Stand up Desk, 55x24 Inches Sit Stand Home Office Desk with Splice Board, Black Frame/Rustic Brown Top

I just finished assembling this desk, and I'm pleased with its quality so far. I bought it somewhat on impulse while browsing for computer desks because Amazon had a great coupon deal on it and it fell within the size I needed. After assembly, I realize it is well worth the full price.Pros:- The legs are very sturdy, made of hefty metal tubing. They add a lot of weight, helping with stability. Plenty of bolts are used to keep all the parts tight and wobble-free. The feet bars are as long as the desk is deep, and the feet are independently adjustable for leveling. Even at max height, this desk feels stable and would be difficult to accidentally tip over.- The desk itself is made of 2 fiberboard panels, split long-wise, with a texturized plastic veneer (which probably helps prevent scratching). The imitation woodgrain looks very realistic.- The cable holders built into the back of the desk are very convenient.- There is a J-hook tucked under the left and right side of the desk to hang headphones or other items. They spin freely in mounts, so you can rotate them 360 degrees. I wouldn't put anything heavy on them, but they are convenient.- The height controls are very simple to use: just hold a button to raise or lower the desk. You can store the current height setting in 1 of 3 memory slots, and just press a single button to adjust to one of the stored heights. It has a child safety lock-out feature to prevent unwanted use of the height adjustment controls.- The desk is large enough to hold my 19" laptop on a cooler, full-size keyboard, and over-sized mousepad with plenty of room to spare. You could easily squeeze a normal desktop setup on the desk, or put the tower off the desk and run a triple-monitor setup.Cons (all minor):- The power cord is rather short for my use (desk in the middle of a room), but would likely be sufficient for most users who put the desk near a wall like a logical person would.- The cable organizers are made of a hollow plastic that is rather flimsy and could break easily if a cable gets yanked in the wrong direction.- The screw holes in the desk panels (used to attach the desk to the legs) are just drilled into the fiberboard. An inset metal nut may have been a better design. The fiberboard desk panels felt a bit soft when I was driving the screws in, so I set my drill at 4/10 torque to prevent stripping and everything came out nice and sturdy.- One of the fiberboard panels came out of the box with a noticeable bow, creating a dip of at least 1/2 inch in the middle of the panel. This was entirely negated once the desk was fully assembled, so this was only a momentary cause for concern in my case. If the second panel had the same bow, it would still exist once the panels are connected.Overall, I see myself using this desk for years to come. I would definitely recommend it.

The desk itself was easy to build. It was safely packaged and arrived all in one small box. I appreciate that the actual desk itself was split into two pieces making transporting the package easy up some stairs. It took about an hour to build because I took my time with it.After assembling everything and testing it out, only one side was elevating. Had to go back a few steps and align the desk legs. It wasn't challenging to retrace my steps. After fixing the alignment, the desk began to work as it should. So far, I like that it holds a bunch of stuff despite being a 40x24 size desk. I like being able to use my walking treadmill underneath while getting work done. It's a large desk but not so large that it takes a lot of space in the room. I haven't used the hooks just yet so I can't speak on that, but it seems decent for what it's meant to do.This is my first standing desk so I wasn't sure what to expect with the motor, but it's quiet. The desk seems stable so far and not wobbly even at its highest height. Moving the desk around after it was built is easy and it's not as heavy as it may look. Is it comfortable? It's a desk. It fits my criss-cross chair underneath and gets the job done. For the price, I can't say it was a bad purchase. Hopefully it lasts some time.

I bought one of these for my wife to use as a sewing table and ended up buying 3 total to create a sewing station, two head-to-head and one on the end. You can adjust the feet to make them level and counter wobble (and to make multiple tables the same height). With the three programmable heights you can set the tables to sewing or cutting height with the press of a button, or you can manually adjust height by .2in increments using the digital display. She can have all three tables the same height for large projects, or have one set for sewing and another set for cutting to reduce back strain. Her friend even brings her portable machine over and they sew face to face and have the third table at cutting/set-up height or lowered for a single surface. The tables are of a substantial weight, easy to assemble, and of quality materials and very stable. The lifting/lowering mechanism is smooth and precise once adjusted correctly. Highly recommended.

This desk works well. The motorized movement is smooth and I have had no issues so far. The option for settings is handy. The cord holder tabs in the back do not hold MacBook or USBC charging cords, so I have had to attached a small cord holder on the back. The desktop is thin so options for this are limited. It’s not as stable as I would like but for the price point it’s fine.

Final update: I love my desk! I had the pleasure of working with May from Claiks customer service & she made everything so easy. She is incredibly kind & helpful in getting the top boards ordered as a priority rush. I received the new boards & put the rest of my desk together within a half an hour. My desk is sturdy & beautiful & works perfectly. I’m so happy it worked out & that I had a lovely experience with their company due to the help of May!Update: the seller reach out & is helping in having new boards shipped to me. They were incredibly helpful & are ordering the new parts as a priority.Shipping was quick & I received it in less than a week. Both pieces of the top of the desk are cracked & bent. Tried contacting the manufacturer to see if I could replace the top as the rest of the desk seems to be fine but didn’t hear back yet.