Epoxy Resin Kit - 2.4L / 95oz Crystal Clear Self-Leveling Epoxy Resin with Pump for DIY Resin Art, Table Top, Jewelry Making - 1:1 Ratio Bubbles Free High-Gloss Casting Resin for Coating, Mould, Wood

Everything you need, enough for me to play around with and learn how to use it leaving more than enough to do some very nice bits.Fantastic medium for artists and very interesting to work with.I recommend having a place for this to live because it can take up a whole room easily if you start getting ideas of what you can use it for.You do need a bit of patience to let it dry fully before touching it. It becomes hard and flexible before becoming fully solid so you can make some alterations to your work as it is dryer toward the end.I haven't noticed a smell however I use it in a well ventilated polytunnel.Recommended as an artist medium.

Used a 3 batches of this product to cover an oak ring table top with epoxy resin and Micah powder. The project was outside so I didn’t notice a smell. It was easy to use but I’d advise careful and thorough mixing on a large plastic sheet as the stuff drips while being moved about; also I lost a bit due to the mould leaking so your mould needs to be watertight. I worked only when the temperature was over 20 degrees centigrade and the finish set perfectly clear without any bubbles

This is a great product. It does exactly as it says and is really easy to use.Don't use the gloves that come with it. The resin does seep through and you end up all sticky. Also one of the pumps didn't fit on the bottle properly, but I've taped the bit off it and that seems to do the trick! The other one was fine though.I'd recommend stirring slowly and with your cup of resin in a bowl of hot tap water as you do as this reduced micro bubbles loads - I don't have a vacuum chamber.Over all really good product so far but watch the niknaks that come with it!

Good value for money, goes a long way, love the pump idea, no mess, have purchased again already

I’ve never done anything with epoxy resin before but was keen to try, and after researching how expensive resin workshops are I’ve decided to watch a few videos and try it myself, see how it goes. It was actually much easier than I thought! I’ve made 2 tables preserving objects from travelling. One is made from Estonian and Rhodes pebbles, the other one (curing right now) is from Santorini sand. I’ve become so keen that I want to make more stuff now! This resin doesn’t stink and is not messy. The only thing I would recommend is to get a silicone measuring cup and silicone mixing stick because that way you utilise all resin and it’s easier to pour it out of the cup. I would also recommend using disposable rubber gloves than these plastic ones. I wasn’t using the face mask as the resin isn’t stinky but I don’t know if I should have…

This stuff is absolute rubbish and I regret buying it and not spending the extra on the stuff I normally use, I should of basically put my money in the bin as that's where this mold will be going

Great for project

I have used so many resins...this is up there with some of the best...hardly any bubbles after mixing and what there was degassed in a matter of minutes. 40 mins working time...easily demolded after 10 hours...it's glossy and beautiful. I highly recommend.