Powers Fasteners AC100 Gold 8478SD Acrylic Quick-Shot Epoxy, 10 oz Size

Works great make shur you work with a small amount at a time this stuff starts to kick in about twenty seconds if your using for anchor bolts do one at a time and tighten completely then move on I used on a car lift bolts worked great

This stuff sets up super fast, so better have all of your holes drilled, blown out and your fasteners laid right next to it to immediately insert after dispensing the adhesive. Holds incredibly strong once cured!

Could not make out date, smeared, broke new caulking gun trying to make it work.bought a heavy duty caulking gun, still had to remove core of tip. Had to be out of date.Was installing a truck lift, 2 days of work wasted

Self-mixing and quick setting made usage very convenient.

I believe the product itself is good. The nozzle clogged for me. It started out fine, then about half way through the tube it clogged up. Some of the resin also squirted out the back of the tube. I just removed the nozzle and mixed it on cardboard. Luckily I was able to do this. Not everybody will be able to, especially if you need to squirt it into a hole for all thread anchors.

It didn’t mix coming out of the tube thus not creating the reaction needed for hardening. Maybe I just had a bad tube.

I did some checking and this is the best value for the amount in the container, I used it without the mixing nozzle and mixed it by hand with a small spatula, I replaced the cap and saved the rest for another project and as long as you keep the opening clean and without the 2 items mix you are ok to store.

This is a great construction epoxy. It has some grit in it. It flows well and sets up hard. By far our favorite epoxy, but you can probably get it from your local building supplier for less.