*** We can not guarantee any shielding performance*** The LK-120 Lab Kit includes an A.C. Magnetic Field Evaluator Probe (Model EP-101A). The alloy material included is Perfection Annealed and will not require re-annealing unless severe forming or heli-arc welding is performed. Magnetic Pickup Probe: The EP-101A, A.C. Magnetic Field Evaluator Probe comes furnished with the LK-120 Lab Kit can be used with a DVM or oscilloscope (includes Banana Plug). It will measure magnetic field intensities and the attenuation ratios of magnetic shields. The nominal probe output is 20 millivolts peak per Gauss at 60 Hertz. The probe is accurate for direct measurements from 10 Hertz to 3 kiloHertz. Above 3 kHz it should be used only for measuring relative intensities. Each probe is carefully calibrated with the calibration number shown on the probe label. The materials included in this product are not suitable for shielding strong magnets (i.e. neodymium, rare earth, or other permanent types). We can not guarantee any shielding performance.***LIMITED OFFER: our Lab Kits will included free samples of our wire and cable shielding products through September 2017. The samples include: 1 pc. 12” - WC-025 Co-NETIC Wire 0.025 in Dia. 1 pc. 12” - MTH-24 INTER-8 Cable, PVC Insulated, Co-NETIC Shield, Jacket, Tinned 1 pc. 12” - MTH-24T INTER-8 Cable, ETFE Insulated, Co-NETIC Shield, Jacket, Tinned 1 pc. 12” - SSC-750 3/4 in ID SPIRA-SHIELD Conduit 1 pc. 12” - WBS-250 1/4 in ID AA CABLE SHIELD 1 pc. 12” - WBS-500 1/2 in ID AA CABLE SHIELD (already included)
Trustpilot
3 weeks ago
3 days ago
