LAUNCHOBD2 Code Reader CR319 Check Engine Diagnostic Tool with Full OBD2 Functions, Car Fault Code Reader, Supports Mode6 O2 Sensor and EVAP Systems

The code reader worked straight out of the packet for my 2017 Nissan X Trail.The MOT showed the engine light on due to an O2 sensor which the garage cleared prior to the MOT.The light came back on in a few hours after the test so I bought a few doses of fuel cleaner and put that through the fuel system, the light stayed on until I attached the code reader.It identified the fault and I was then able to clear it so far the light has stayed off.Already saving me money!

The LAUNCH CR319 correctly identified my engine fault, it provided me with a code, although the built in software couldn't tell me what that code indicated. However, searching online allowed me to know what steps I needed to take next to get my car happy again.It seems solidly built, I could easily read the display and it powers itself from the OBD2 connector. This thing does way more than I'd ever need, as a result there's a menu to navigate though to perform the testing function.I would recommend this to someone reasonably technical.

Bought this because the engine warning light came on in my wife's car and knowing it could be anything from emissions to a failure of a part so knowing what garages can be like for charging for these sorts of things so I got this to hopefully find out the cause and hopefully sort it. It was so easy to use just plug into the socket in the car and it powers up, a simple menu appears from which I selected scan vehicle which it did and came up with an emissions problem it then asked if I wanted to clear the fault which I did to see if it would reoccur when I restarted the car which it did not and has not up to now so problem solved in a matter of minutes. So pleased as a garage could have charged anything from 40 to a 100 pounds or more for a simple fix. So definitely satisfied with this purchase and its simplistic ease of use.

Almost all modern cars now are so controlled by computers that even the simplest fault can send it into limphome mode. I was keen to get hold an OBD II scanner after recently having a check engine light which I didn't want to incur the cost of going to a garage to find out it was something simple that I could remedy but the only way to know this is to use a scanner.The scanner connects into the cars onboard OBDII socket - its usually under the dashboard somewhere and it starts by reading the stored error codes in the computer and you have several options, to clear the fault if it can be cleared or to learn more about the fault. In my case the scanner identified that the MAF sensor was not reading correctly and so I tried to clear the fault but the check engine light came back on after a few minutes which suggested that the sensor actually needed to be checked or replaced. I retrieved the sensor from inside the airbox and noted it was fairly dirty - a quick blast with some contact spray and I replaced it - reset the computer with the tool and all was good - the issue hasn't returned. I reckon this has saved me a fairly big garage bill, so really happy with the tool.

Works fine, but does NOT do Peugeot, which was the reason I purchased the item, will be returning.

Quick delivery good price works well maybe better instructions but very pleased

Bought as i wanted to upgrade from an older OBD reader which is over 13 years old, i plugged in and it read the fault and then when i selected erase it said erase complete but it did not remove the fault, i tried numerous times and nothing, i then plugged my cheap old unit in and it erased first time. Sent back for refund. I would recommend paying a little more for a better unit.

Works good sorted out the problem