Lepro 12V LED Strip Light, Flexible, SMD 2835, 16.4ft Tape Light for Home, Kitchen, Party, Christmas and More, Non-Waterproof, Warm White(Not Include Power Adapter)

These are great especially considering the price! For a sub $10 product, the first time I ordered these in 2016 I was worried about the quality and how long they would last. I’ve now used them in two different houses I’ve lived in and they have been great, the only issues I’ve had with them have been related to the driver I was using which turned out to be faulty, and a faulty solder joint that was my own fault. I installed these the first time in a house as under cabinet lights in the kitchen. They lasted for two years until we moved out and I’m sure they would have continued to last if we had continued living there. (And I had them on almost 24/7) I have now installed them in another house, again as under cabinet lights and they have been great. My favorite thing about these is the brightness and color temperature. I don’t like a lot of under cabinet lights / led white lights because in my opinion they tend to be too cool (I absolutely HATE daylight white lights, they make everything look like a hospital room and I don’t understand why people like them...) these lights are a nice, soft, warm white, they look great and provide fantastic visibility for cooking, and create a nice evening ambiance at home. I recommend also buying a remote control adapter device to install with these lights as this will give you the ability to adjust the brightness of the lights and then them on/off without unplugging them. Shown in the photo, they are dimmed, they do get much brighter if you want them to. If you’re looking for quality light strips, no need to buy a more expensive brand, these get the job done, look nice, and for under $10 what more could you want?

"Wow, Heck yeah!" - The first words out of my mouth after turning them on. I was just stopping by to pick up more and decided to leave a review. These have become my go-to white LED strip. I originally bought these to illuminate my 3D printer enclosure; they are so nice, it wasn't long before all my machines got them. Its convenient that being a 12V strip, they can wire directly to the power supply of my 12v machines. Otherwise I just run them on 1-2A 12V wall warts from the thrift shop. I've found so many convenient uses for these that I am picking up another spool just to have on-hand. I obviously really like these, but if I had to complain about something it would be that the adhesive is not uniformly laminated to the strip. The adhesive itself is great, but there are many spots where the strip bunches up and the adhesive forms a bridge/gap (see pictures). No biggie though, i just make sure to run a razor across those before peeling the adhesive liner off. This allows the strip to lay flat against the application surface. Great light and great deal for the price!

These are fantastic, inexpensive, and easy to install. I needed some lighting in the interior cabinets of my motor home. I tried battery-powered fluorescents but they were too bulky and I would sometimes forget to turn them off and drained all 8 of the AA batteries. The lights were also too big and they would get in the way of removing some items. These lamps were far superior. I ran two lengths of these at the top interior of the cabinets, picked up three micro-switches at Radio Shack, and a 9V battery and connector. YES, they work fine on 9V but they are probably brighter on 12V but I didn't want to try to fish a 12 V feed through the walls of a motor home as there was some framing between the 12 V run. I used duct tape over the cabinet wood and laid a strip of double stick tape over the duct tape for the length of the run. The extra tape may have been overkill, but it's not going to fall off. I wired the switches in parallel so the light strip turns on when either of the three doors opens and automatically turns off when the doors shut. So for less than $25 and about 3-4 hours labor, I've got a nicely lit interior cabinet. UPDATE: Found two 6V lantern batteries on sale for $5 at Walmart, wired them together in series for 12V and replaced the 9V battery with the lantern batteries. WOW! What a difference! These lantern batteries will probably last longer than my motor home and I didn't have to try to fish any wires through the walls.

It was not easy to choose from the myriad LED stripes on the internet, but this one proved to be a really great one. I ordered 5m in October and now 2x5m in January. I use them as display lights on IKEA shelves, the remote is not in use, but worked when I tried at the beginning. The brightness level is just fine for not giving too sharp contrast to the products or unnecessary shine and flickering. I cut it and soldered where I needed a brake in the stripe. The overall quality of the product, the packaging and the manual suggest that the manufacturer has a good eye for the details. Highly recommended.

Een goede service

Hier bekommt man das nötige Minimum an Qualität, dass diese Streifen um einen Preis <2€/m zum optimalen Mittel der Wahl macht. Zumindest wenn man nicht vor hat die verklebten Streifen so schnell wieder zu ersetzen und ein bisschen nachhaltig handeln möchte! Ja, es geht billiger! Aber dann hat man eben keine gute Selektion der LEDs nach Farbe und Helligkeit. Ich habe mittlerweile 50m dieser Stripes an verschiedenen Stellen im Haus verklebt und alle haben augenscheinlich die selbe Lichtfarbe und -helligkeit. Zuletzt habe ich die Aktivbeleuchtung im Wintergarten unter den Sparren hiermit realisiert. Da ich dort eine Tuch-Verseilung zur Verschattung von innen habe, die es unmöglich macht andere Lampen mit größerem Aufbau anzubringen, sind die 12m aktiv und 15m passiv angebrachten Stripes die perfekte Möglichkeit gewesen die 24qm im Zweifel taghell mit angenehmen Licht zu fluten! An dieser und auch allen anderen Stellen (Handläufe im Treppenhaus, Unter- und Hinterleuchtung der Möbel im Wohnzimmer, der Küche und der Garderobe im Flur) dimme ich diese Stripes mit den PWM-LED Dimmern von HomeMatic. Jedem der gerne auch mal selbst etwas bastelt kann ich diese Kombination wärmstens empfehlen. Pro Dimmer lassen sich so 60W Lichtleistung bzw. gut 15m dieser Stripes installieren. Die HomeMatic Komponenten sind außerdem nicht zimperlich und haben einen anständigen Puffer, so dass jeder der des ohmschen Gesetzes mächtig ist seine wahre Freude an der internen 7A Sicherung hat ;) Als Netzteil kann dementsprechend ein beliebiges 12V-Modell mit der nötigen Leistung dienen. Einzelprojekt zusammengefasst: 3600 lumen warmweiße Lichtleistung, stufenlos dimmbar, im SmartHome integriert und programmierbar inkl. allem (nicht enthaltenem!) nötigen Kleinkram wie Kabel, Adapter, Aluschienen, Kabelkanäle.... das alles kostet mit diesen Stripes zusammen keine 100€ und sieht auch noch unglaublich cool aus. DIY-Wille vorausgesetzt. Wenn etwas flackert oder in der Helligkeit nachlässt waren es bisher zu 100% die Plastikverbinder um zwei Stripes miteinander zu verbinden. Diese Teile sind teilweise wirklich ein Ärgernis. Ich werde an zwei Stellen auf Dauer in den Verbindern die Brückenkontakte an die Stripes verlöten um diese Wackelkontakte zu beheben. Ansonsten uneingeschränkt empfehlenswert!

Lyser som den ska

I installed these recently in my kitchen. They powered by a 15A/120V lighting circuit wired to a switch. I also purchased a 2A 24W LED driver/transformer from Amazon which is mounted under my upper cabinets as well. Very straight forward installation, they don’t get very hot, and the 3M tape on the back is enough to hold the strip on. I purchased the clasp style connectors from Amazon as well. The connectors work pretty good but soldering would be better.