StarTech 40-Pin IDE to 2.5in SATA HDD/SSD/ODD Converter, TAA (IDE2SAT2)

This and an SSD replaced the old electro-mechanical hard drive in an iMac G3 DV. Everything worked great right out of the box. I did have trouble loading MacOS X 10.4 on the SSD so I gave up on that after many tries. But it definitely works fine on the iMac with macOS 8.6 or macOS 9.2.

Fast and easy to install. Works great for Sun Netra X1. Use power cable from adapter into the motherboard, as extensions/separators might not work.

This product works great. I have three of them in one of my machine. To be clear, it converts a sata drive to IDE so it can be plugged into an old machine that is IDE only. It does not convert an IDE drive to sata. I have tried it on multiple HDDs and two optical drives. I have had no issues just leaving everything as cable select. If you want a device to convert an IDE drive to sata, try this one https://www.amazon.com/dp/B081YP2S5R. Unfortunately, StarTech doesn't seem to make one of these, so I have to plug one of their competitors instead.

Worked as expected to cover the drive in an original Xbox. Should listened to all the recommendations that day skip the green generic ones. Tried It first and it immediately gave issues and kept locking up the drive after about 10 mins of use. No issue with the startech so far and it allows me to use a 2.5 to 3.5 tray without having to modify the Xbox 3.5 caddy which the generic green one would have required

Bought another brand before this one for my OG Xbox. Boot up took about 28 seconds. Replaced it with this one and the boot time was less than 8 seconds. Definitely worth the extra money. Better quality as well.

This is the top of the top for original xbox mods. I sent back the first one I bought as I just couldn't get it to work. I decided to use a different drive and finally got it to work. I read these have some issues with Samsung DVD drives and it has problems communicating with them when you mod the xbox. I found the way around this is to start it with the power button and not the larger DVD drive button. Using that gives an Error 11 which means it can't communicate with the drive. But it is working but I have to take out a star for the problems/compatibility.

Was having tons of trouble getting the Windows XP installation to detect my SATA hard drive. Popped this adapter on and everything started working immediately without any issues whatsoever. Great product from a reputable brand, highly recommend.

Does work If you are cloning your original xbox HDD. However, if you are using a 3.5inch HDD there isn't enough space in the OEM plastic carriage and you can not place the lid correctly to screw it all back together.

旧式3.5インチを２．５インチHDDを変更に使用した 動作良好でした

Najważniejsze, że ze starym kontrolerem IDE nowy napęd DVD działa, co prawda jeden - tak jakby przejściówka zapisywała sobie go (ten pierwszy napęd podpięty do niej) w pamięci i już żadnego innego nie chciała rozpoznać (jakaś metoda na jej reset?).

I used this with a SATA HDD to upgrade an IDE based audio recorder (Yamaha AW1600). It worked well with the two drives I tested. These were a Vertex 2 SATA II 60GB and a Samsung 840 EVO 250GB. Having tried two other SATA to IDE interfaces, this was the only one I found that worked properly in my particular scenario. The other interfaces I tried either did not work fully or were very slow. I have not done exhaustive testing but it does appear that this is a very good product.

Testato funziona perfettamente.

OK