Ryobi 18-Volt ONE+ Cordless Compression Drive 3/8 in. Crown Stapler (Tool Only) P317

Move over, Bond. There's a new secret agent in town, and it's not undercover in a tuxedo – it's the Ryobi 18-Volt ONE+ Cordless Compression Drive 3/8 in. Crown Stapler. Forget shaken, not stirred; this bad boy is all about compressed, not misfired. I recently welcomed this tool into my arsenal, and let me tell you, it's not just a stapler; it's the James Bond of upholstery. I decided to unleash its secret agent skills on a squad of chairs that were looking more tired than a cat after a laser pointer marathon. The result? A transformation so epic, even the chairs themselves didn't recognize each other. The stapler handled the job like a pro – no misfires, no drama, just a smooth operation that left me feeling like the James Bond of DIY. I half expected the stapler to ask for a martini after the mission was complete. 'Shaken or stirred?' it seemed to whisper as it effortlessly secured fabric in place. But let's not forget the real hero here – the 18 volts of power that turn every staple into a precision strike. It's like giving your stapler a double espresso; suddenly, it's wide awake and ready to tackle any upholstery espionage you throw at it. In conclusion, if you want a stapler that's more 007 and less 404 error, the Ryobi 18-Volt ONE+ Cordless Compression Drive 3/8 in. Crown Stapler is your gadget of choice. It's so good; I wouldn't be surprised if Q himself is secretly reupholstering the MI6 breakroom chairs with one right now. Move over, Bond. Ryobi's in the building.

I used this up in my attic with a bee suit because I was putting up screens over openings in my attic to stop the bees from coming in. I needed to put up screens fast as I was being attacked by wasps and bees. This worked well with my bee gloves no problems. I use all DeWalt so I needed a battery adapter and it worked fine on my DeWalt batteries. I wish DeWalt made something like this but currently they don't. Thanks Ryobi for the great tool, makes me want to switch over to a Ryobi lineup.

Super strong and reliable. I used mine to staple about 100 cardboard rulers to my trusses while prepping for blow-in insulation. It is light enough to use at arm's length over a days of work. Uses standard T-50 stapes, I used 1/2' deep staples and could bury them if desired. I also used 3/8" stapes for batt insulation installation. So much better than a hand stapler, or anything you'll find on TIVO or Tik Tok. Park City, KS

Although the condition of the box it arrived in clearly indicated that it had been a returned item, this crown stapler was in pristine condition. The box contained the original documentation and a small supply of staples. There was even a belt clip for the tool. When I inserted one of the Ryobi batteries I have for other Ryobi tools, the stapler worked flawlessly. It drove staples to the crown in hardened yellow pine. With the smaller battery, I expect it to be handy for overhead work. This replaces a Ryobi stapler/brad nailer that finally gave up the ghost after 10+ years of hard use.

I purchased these (quite expensive if you think about it) electric stapler in order to add to my tool shed for casual DIY projects and cabling I do. I had seen someone review this new version and I was impressed with the product. I was blown away how much better they are than my Stanley set with cabling and the sheer force of the staple itself. I use it for some standard stapling, but where I found it much better at doing was stapling cables in place. I do a lot of networking and cable work for A/V and computer work and these staples have some real holding power while having a nice guide to avoid the obvious, hitting the cable. So many times I just needed a way to hold the cable in place while we button things up, that I reach for a stapler to hold the cable and even though those staplers had guides, they werent very fixed in place and allowed the cables to move during the inevitable jump of the stapler when it hits. This is something I really like about this stapler, the kickback of the unit while in use is almost nothing. This means you are much more likely to put that staple where you wanted it. Most hand held staple guns tend to shift when they follow through the strike, but this unit does a great job. Pros: Fast, no waiting for the next trigger pull and no lead time for the strike. Holds many staples in one go. Easy to see how many staples are left (though the final 10 or so are obscured). Supports a few sizes of staples. Common and inexpensive battery platform that hasnt changed for 20 years. Powerful and strikes through even metal corner plates with ease without having to hammer in the final amount. Wont leave the average staple proud even in most hardwoods. Cons: It is much bigger than a manual stapler, granted. Need some experience with the unit to better gauge the final location of the staple. Even though there is a mark for the staple, the edge of the unit is quite a bit wider than the staple. Can't staple extremely close to your edges because the staple fires about a 1/3 inch from the edge of the staple gun. Doesn't have bump fire modes (get the Milwaukee if that is your thing), but is a bit stronger firing mechanism than even the red sister tool.

Easy to use, has adjustable staple, light weight was able to point, press against the area and pull the trigger. I didn’t have any problems with jamming. Because it is battery operated it allowed to almost complete complete the job. Great value, and quality for the price.

We where recovering dining room chairs. I don't know how many staples I put back, but I counted one of six chairs and figured that I pulled out about 1200. This stapler worked great and it was a lot easier then squeezing a manual stapler.

We have not experienced any jamming issues. The product offers excellent durability, convenient depth adjustment, and a lightweight design.

Ok

Tiene muy buen desempeño, es más de lo que esperaba trabaja con buen nivel de fuerza

Husband loves the versatility of all the Ryobi tools. With interchangeable batteries these are so handy. He has the lawnmower, hedge trimmer, staple gun, sander, drill and light. Highly recommended

I had to do two reupholstery jobs and dreaded having to use a manual stapler, not only is a manual stapler hard on the hands and wrists but sometimes the staples won't go in all the way depending on the person's strength, as a woman I don't have a lot of strength to do a large stapling project and have to take a lot of breaks to give my hands a rest. All my tools are from RYOBI so I had plenty of interchangeable batteries that this cordless stapler requires so I purchased it and thought I have nothing to lose. This Ryobi 18-Volt ONE+ Cordless Compression Drive 3/8 in. Crown Stapler works like a dream! Out of the almost full box of staples that I used not one staple jammed, not one staple only went in part way! Perfect every time! The battery I used did not have to be charged again and still had plenty of charge left. Fits readily available T50 size staples, it is very easy to load the staples into the stapler. A project that normally would have taken all day only took a couple of hours and no pain in my hands! Another great RYOBI product that I definitely recommend.

Great item