MIKA3D 12 in 1 Bright Shine 3D Printer Silk PLA Filament Bundle, Most Popular Colors Pack, 1.75mm 500g per Spool, 12 Spools Pack, Total 6kgs Material with One Bottle of 3D Printer Stick

Beautiful set of metallic like filament. I bought it mainly for the copper/orange color but loce the others as well. The "bronze" looks more green than bronze but they all work very well using PLA silk settings on your printer. Everything was nice and smooth with no issues of stringing or tangles while printing.

I recently purchased this product, and I couldn't be more satisfied! From the moment I started using it, I noticed a significant improvement in my daily routine. The quality is outstanding, and it’s clear that a lot of thought and care went into its design. It's incredibly user-friendly, making it easy to integrate into my life seamlessly. The performance has exceeded my expectations in every way.What really impressed me was the attention to detail. Every aspect of this product has been carefully considered, from the materials used to the features it offers. It’s durable, reliable, and delivers consistently great results. Plus, the customer service team was very helpful and responsive, ensuring I had a smooth experience from start to finish.Overall, I highly recommend this product to anyone looking for a high-quality solution. It's a fantastic investment that delivers real value and makes life easier and more enjoyable. Five stars!

No one buys this stuff for the little 'freebies' they say they'll throw in, but just so you don't count on it--I received none. No glue stick, no tool, whatever.But what I did get was some great shiny PLA that printed well and they look great. I've tried all three and I think they look very good. Not super 'metallic' after printing, to be honest, but very nice looking.

This filament really does produce some nice results, but it can be tricky to get the entire print to have that shiny surface. If you just use it like any other PLA filament, you'll find that the edges of your print are that nice shiny metallic look, but the base and top layer may be dull (and quite frankly, ugly. These colors look horrible without the shine). Unfortunately, there doesn't seem to be a way to polish or restore that shine. I tried sanding, heat, vapor, polyurethane, etc. Once it's got that dull look, there doesn't seem to be a recovery. I'll keep trying and update if I find a method, but it's not looking promising.The best solution is to make sure that your shiny surfaces are not parallel to the bed. This stuff is outstanding for vases, busts, figurines, etc. or any other print that you can orient properly. Don't try to print a box and expect the top and bottom surfaces to look as shiny as the sides.I was able to (somewhat) get around the bottom layer problems by using a raft and taking down any over extrusion as low as possible. You'll end up with lines, but they'll be shiny ones :) The top layer is a bit trickier, but the same principle applies. Try to avoid surfaces that are perpendicular to the head. You'll actually get better results with angled top and bottom faces. The tricks that you may have used to make your usual PLA prints smooth and shiny work against you with this filament.This stuff does NOT sand or polish worth beans. Supports need to be on hidden surfaces because you're going to be stuck with any dimples.This filament is stiff and does bind on the spool slightly. Make sure that you have a guide to keep the filament drawing straight off the spool or you may end up with jams. (that clicking of untangling filament means that I'm looking at my printer every 30 seconds, so you may want to leave the room if you're the nervous type :)Note that these are .5 Kg spools. A number of people have complained about this and the price, but it's perfectly inline with other specialty filaments. It would be nice to have bigger spools that you could order (especially if you only want one of the colors), but this really isn't intended, or priced, to replace your PLA for everyday printing.

It looks beautiful! I am extremely happy with the product. Will purchase again.

It came well packaged, im new to 3d printing but seems to stick well I still haven't run out yet and have made tons of toys.

I’m new to 3D printing and thought the six color sample set was a good starting point for using silk PLA. When I received my set, I noticed one was brittle. So, instead of opening them all up, I decided to return them. To my surprise, I was sent a replacement at NO CHARGE! My second set worked wonderfully. I printed on both an Anycubic i3 Mega and an Anycubic Kobra 2 Pro. No issues printing, even at speeds of 240 mm/s. I’m happy with my prints and definitely their customer service.

Under high powered UV lights, the filament will light up but it will last only a tiny bit of time before dimming. It has the brightness of a glow in the dark toy that has been sitting in an attic for 15 years. The blue/purple just doesn't glow unless it is absolutely bombarded with light. The rainbow looks like it has poor quality control more than it has a rainbow effect; there are very subtle variations.It prints fine and isn't too weak.I will not buy this again.