dea A4551 Front Right Engine Mount, Black

Fits just like the original motor mount.

My son has a 2004 Honda Pilot and every time the car shifted from first to second gear, it felt and sounded like the engine was going to jump out of the car. This was an easy fix so my son and I tackled it our selves and it was actually quite easy. We supported the weight of the engine with a floor jack before removing the three or four bolts on the mount and then set the new unit right in its place. Took about 15 minutes, yeah that's all! Watch a YouTube video or two, and you can do almost anything. It took care of the loud clanking when the gears shifted, but the car still shifts pretty hard so I've ordered a couple of shift solenoids for the transmission. This unit was heavy duty and look well made, but time will tell if it holds up anywhere close to Honda OEM parts.

4 stars for now, will upgrade to 5 stars if it lasts beyond 10-15k miles.Easy install, perfect fit and everything lined up correctly. I have read some say that they had to widen the holes to align them. If you feel the need to do so on Pilot'03, take a step back, and take deep breaths. The part is fine, it is possible that you have tightened some bolts without finalizing the alignment. So, loosen all the bolts a bit, and it should align.My sequence:Removal: Loosen through bolt, now take off bracket bolts, collar bolt, through bolt, chassis bolts. You may have to wiggle the steering fluid reservoir a bit. Use a combination wrench for through bolt, breaker bar with extension and shallow sockets for others. It will slide out after being pushed towards the windscreen.Install: Do not tighten any bolt yet. Chassis bolts , through bolt, collar bolt, bracket bolt (push the mount slightly towards the bracket and the bracket bolts will align perfectly). Tighten everything now. Torque used: 35 ft-lb for through bolt, 40 ft-lb for others.

Seems to do what the factory part did.

It looks strong and seems heavy duty. It is perfect match for an engine mount on the passenger side of Acura MDX 2003. This is for the mount only. I had to reuse all old bolts and balances. It looks better than the one I got from a local auto part store for $107.00. For long term assurance, I don't know yet.

Seems to working good. Lot cheaper then other places especially local auto stores

super quality at a fraction of a price, now i i know why aurozone and O’rally are going out of business

is not made to fit an 03 mdx. it looks similar, but it doesnt have the same dimensions as original. i sent it back and had to wait to fix my car. maybe i got the wrong part by mistake??? dunno