オーディーアイ(ODI) Troy Lee Lock-On Bonus

So before this my favourite grip had to be Lizard Skin Peatys, now it is a tie with more so me looking at how long it takes me to wear down the TLDs to really make the choice. Though when I look at it, the TLD plus a replacement set of grips alone would be equivalent of a Peatys purchase. So as far as I have gone with it I love it, didn't think that the points on the end would be as big of a deal as they are, but with me riding a lot more at night they are super and I couldn't see riding without them. The grips itself hold up really well in the dry and as good as a pair of Peatys in the wet with bare-hands. Before these I had some standard OURY grips that I absolutely couldn't stand and caused me to have a let of hand fatigue and that was just not a choice and as winter came in riding no handed 95% of the time was not going to be either so I had to find a pair and these have done great for eliminating my hand fatigue as well. TLDR Pros: Comfortable for my long fingers and not so spongy that it causes hand fatigue due to my grip style. Works great wet or dry Lock-on Cons: (Potential) I have been told they do not have as long of a life as a pair of Lizard Skin Peatys Thoughts: The lips on the edge are a great hand guide at night to guess hand orientation and could be useful for stopping hand grip on harder trails. Also keep in mind I am riding a hybrid MTB built for commuting and light trails.

Good grip but not the softest feel ever. If you combine these with the right bike gel gloves than you'll have the right set-up. Trying to hold on to these for 30 minutes on the curvy intermediate trail would wear your bear hands even with a full suspension MTB. Other than that, I used them for 30 miles of riding so far and the way I see it. They are well designed, look nice on any bike and pretty much deserve 25 bucks a paid. I wish they came with an additional set it caps and clamps for let's say another 5 bucks ( I mean these parts wear when you are on any trail, nobody uses kick stands these days and dealing with nature is always harsh on the elements) . Also both Crank Brothers Cobalt Grips. I should say there are pluses and minuses, but Troy Lee Design is the way to go if you need performance or design. Simple to install (everything snaps together, if it doesn't fit the gentle way press a bit harder), good quality materials, great performance.

I replaced my original 2007 Specialized grips with these. The old ones were worn smooth and rotated which wasn't reassuring. These new grips are amazing. The rubber almost feels like glue. You can actually feel your fingers stick to them. The raised rubber ends are super for keeping your hands centered on the grips. FITTING INSTRUCTIONS It would be nice if there were even minimal instructions with them. It wasn't obvious which way around they fitted until I started watching YouTube videos. There is an L or R stamped on the rubber end to let you know which is the left and right grip. The 4 metal clamps are all machined the SAME so it doesn't matter which one gets fitted where. You'll therefore end up with one screw facing forwards and one screw facing backwards on each grip. The "Troy Lee Designs" logo is supposed to face the FRONT of the bike and be horizontal. Fit the clamps based on this knowledge such that the open ends of the clamps are at the bottom, under the handle bars. Push the end caps into the outer clamp BEFORE the grip is slid onto the handlebars. This will ensure you push the grips on far enough but not too far. They also need to be fitted before you tighten the screw on the clamp. Cheers John

I installed these on my Specialized Crosstrail hybrid bike, and they work great with or without gloves. The grips are very grippy and comfortabl—they don’t leave a mark on the hands like some other ones. Installation was easy but make sure to do it in the right order because it’s hard to remove them. Highly recommend.

I was worried the lock on clamps were going to be cheap and not hold on tight. I was pretty pleased when I got them on (which was super easy to do) and they were incredibly tight! Haven't broken yet so I'm happy. They do look pretty cool which is always a plus. I put these on my 1990 Kawasaki 650 SX Stand up Jet Ski and they fit perfectly. It does seem like most grips are universal but I am not a hundred percent sure.

These grips have never failed me. Ever since troy lee designs collaborated with ODI I have owned these. Same great sticky compound and the directional grip design stops your hands from slipping. I have used them on my all-mountain and downhill bikes. The small flanges on the outside and inside actually stop your hands from slipping to far inside or outside the grips. If you order directly from ODI, I believe you can also customize the clamps. Only con, I wish the came already put together so I could just slap them on my bike.

Nice grippy & sticky grips. Thin and no cushion but feels great with and without gloves. Sweat doesn't seem to cause any big loss of grip so ++ there. I dropped my bike on a single track and maybe one of the grips hit a root because the end of one of them now has a cut. It's not noticeable while riding but I did notice it when I was inspecting my bike one day. Kind of disappointing but since the damage doesn't affect functionality I'm mostly indifferent. Would recommend.

Great product! my only issue would be to put instructions on the packaging on how to put the grips on ur handlebars...no worries tho it was nothing a quick visit to youtube couldnt solve. i typed odi troy lee design lock on grips in youtube and a convienent video came up on how to put these together and install them correctly. I did exactly that and the grips work great. great grippy feel on the grips by the way. I would def buy these again because Chris from Mtbtips.com recommended them....Thanks Chris

I knew from the start when i bought this product that it would be good, TLD wouldn't put their name on a bad product and how right was i. The only difficulty i had with this product was putting the metal clamps on to the rubber. Immediately i noticed that the rubber was sticky to the touch for added hand traction. I would recommend wearing gloves with this product if you have soft hands as your hands will get calluses on them.

Amazing!

Me gusto que tienen un buen agarre, se sienten muy bien, tienen buena calidad y la goma es bastante suave, además el sistema de fijación doble en ambos extremos te permite sujetarlos bien a los manubrios.

Do not bother with any other hand grips. These are secure, impact resistant, the grip pattern is perfect for preventing any slipping or motorbike-style "throttling" when out on the trail. I buy these for every bike I own and gifts for anyone with a bike.

ネジ止めタイプのグリップです。 MTBにジャストフィット。 かっこいい。 ちょっと高めだけど、それだけの価値はあるかと。