LinecoNeutral pH Adhesive, Archival Quality Acid-Free PVA Buffered Adhesive Dries Clear Flexible, 1 Quart, Ideal for Paper Board Framing Collage Crafts Bookbinding

Best glue I have found. Don't have to rush doing the rebind part you are working on as it need to air dry just a little to get that tackiness. Once it sets... it is set. Flexible when dried. Easy to use and work with and easy to clean off when you over apply.

I have used this glue to repair the bindings on many books, and it works so much better than the glues that dry hard and then crack and let the pages fall out of the book. This glue dries quickly, but when it's fully dry it is flexible. Use this glue and you will enjoy the rewards of properly binding books so they last for much longer. I have also used it to make new bindings for books that I print. Every library has books on re-binding books, and the information is all over the internet, too. All you need is this glue, a few other simple tools, and the ability to follow simple directions. This glue is used by pros.

I tried several glues and tapes and found that for performance and price - this would be my GO TO glue! It's not as fast drying as Art Glitter Glue (no actual glitter) but, I find I like just a little extra time to 'move around' and reposition lining up whatever I'm gluing. TAPE GRABS Immediately and tears if you hesitate just a little bit too long - assuming you need to move it. As noted, some glues will adhere VERY quickly..... but this gives me just the few extra seconds I need to make certain of my alignment and yet - when it dries = IT'S STUCK!!! It's so good - that Karen Burniston uses and sells it on her website. I love her (buy LOADS of her dies), but this size is just so blasted economical that I buy it here!!!

Makes for useable repair of broken book spines and building new book covers. Dries quickly and flexible. Reinforce with book repair cloth before it dries. Cleans up easily with water.

I tried three glues. I started with hardware store "cement" and it was super strong even before letting it set, but it was yellow, and not for flexible surfaces. Next I tried stic flat glue. Very rubbery/gel that was difficult to spred. Fairly strong adhesion they are labeled 2 in red. This glue, the PVA was the strongest hold and poured well. I glued a 31x31 inch canvas to plywood. I started at the bottom of my canvas and board gluing 6 -12 inches at a time with glue on the board and on the canvas backing. Starting from the bottom center up and out, I squeegeed the surface with a clean towel and my hand. The glue dries semi fast and I'm in a dry climate so I moved quickly and used a decent about of glue. This was great when it came to rolling the edges over but I had to press and re press it in place. I cannot even pick a corner up after 24hours of drying. I will never do 3D canvas again while I have kids. I was able to store my project in a roll when not working on the painting. For this piece I made an alphabet for my kid, and I didn't want their explorative fingers peeling the canvas at the edges, or poking fingers through a stretched canvas on a frame. I will do this with higher quality acide free board next time for their growth chart I made as well. I think I have 2/3rds a bottle left. I read a review that said it was nothing more than Elmer's glue. Yes it is white, and a little runny, and to be far I didn't test Elmer's in this way. But after teaching art for 15 years, and working with lots of glues, I'm pretty happy with the result and would not have even bothered testing Elmer's, or tacky craft glue. If doing a lot of this kind of work a squeege would help, I have almost no ripples or bubbles but the canvas did move and stretch and I pressed multiple times as it dried to make sure it took. Also next time I would have aloud for an extra inch all around for wrapping over the back.

I bought this glue a few months ago for some paper projects, but have found it incredibly useful for more than just paper. It adheres fabric, metal, rhinestones, PET stickers, cardboard and a variety of other things as well. I have even used it to create decorative boxes.

I have bought this product before and found this batch to be slightly different, thicker and dries faster than the previous batch I had. It definitely does what it's supposed to but I had to dilute it slightly to use it properly.

This is my preferred glue for all my bookbinding projects and I've found use for it in my terrain building projects.Adheres book cloth, paper, and whatever I'm gluing well to my bookboard/chipboard for my book binding projects and then I use lots of cardboard for my terrain building and keeps them held together quite well. And then plays mostly well when I then glue some tissue paper on top of the cardboard. Also the glue works as a good sealer on styrofoam before spraying it with a primer. Just a few coats and makes sure the primer doesn't melt it.I've had not issue thinning the glue down with a mix of water+methyl cellulose and it keeps its strong binding power once dried.