BOSCH RA1141 26 in. x 16-1/2 in. Laminated MDF Top Portable Jobsite Router Table with 2-1/2 in. Vacuum Hose Port

The portability alone makes this a good value. It is high quality and stable when attached my table saw with clamps. I won’t use it on the ground or un attached. It is versatile, especially for repetitive items such as table legs. I like the design because everything is self contained and compact when in transit. The adjustments make this table an excellent choice.

I fitted a Dewalt Router to this. I had to make a small modification to one of the screws (shortened it) to get it to fit, but otherwise no problem fitting it. Like some of the other reviewers said, yes the legs are a little wobbly. You need to fix the table down per the instructions, or have a helper hold the table while you feed the part through. Certainly the routing functionality worked well Only negatives are that the tool holder lids flip open too easily (won't stay closed during transportation) and a lot of sawdust goes in them. Certainly not a reason to buy something else

The unit works very well. It's very light which actually creates a problem, you need to use the holes to bolt this thing down while working with it. But since it is portable I don't see that as a fault but rather a requirement of the unit. Changing the bit is a bit harder than I would like but I'd rather it be inconvenient than have the router come lose in use. But it is very easy to remove the router with the snap plate in the bottom. Also, it fits most routers, but make sure you look in to it, if you already have a router, make very sure the model number is supported, I had to buy another router. Not that I needed much encouragement to upgrade it:) The only complaint I have is that the leg storage doors are poorly fitted, they don't like to stay closed and I can't trust them to stay closed and not spill out their contents with light movement. Some magnetic latches would have done some amazing value, the plastic clip like shutter just is not up to the task. As such I end up not using the leg storage and that really is the only problem I have with the unit. I do wish the back fence would be moved back more, it will require me to use it mostly with the fence off and that's why in the photo the fence and guard are both removed. It was just overly limiting, but I will eventually built this unit in to my work bench and then use the same spot to house it with a lid to return my work bench space when not in use by lowering the legs to store it. All and all I would recommend this unit to someone who has very limited space as I do, or someone who needs to travel with the unit. You will need to come up with a mounting system, if your going to work out of a truck bed I would strongly advise making a wood tray for it that uses strong magnets to hold the unit to a truck bed (*not a Ford, lol the newer F150's have a aluminum truck bed)

I just got the BOSCH Router 1617EVS 2.25 HP and this table is perfect for it. I can now do all the cits I want with great accuracy. The only thing is the all plastic miter gauge. If you tighten it at the angle you want it locks in place. I tossed it as usless. I ordered a real nice JCFants Table Saw Miter Gauge, Works w/Table Saws, Router Table, Band Saw (Red). I wanted accuracy anyway. You can attach the router to the detachable plate for easy in/out or directly to the table which is what I am doing. DIY a table to extend the work area and you have the perfect shop tool then slide it out for portable.

Like this item rail built if you need router table , this is a good one 2 buy

Great router table. Perfect for my small workshop.

This does more or less what it should, but it isn't great and isn't particularly well built. When I received the table, it had one corner that was flared out as though it had been dropped during shipping, but the box had zero damage indicating that the damage was done before it left the factory. The damage is annoying because it causes the surface of the table in that corner to be higher than the rest of the table which means you cannot have material go across that portion or it will throw the angle of your routing off. The next issue is the black rubber trim around the outside of the table. It is not perfectly flush with the table, so your material catches it every time you slide across it. I ended up taking a razor blade and creating a chamfer. They should have just left it off and painted the edges or something. The third issue is the fence is MDF and uses carriage bolts to tighten the sliding panels into place. The problem is that the square part of the carriage bolts strips out the MDF almost immediately so that the bolts just spin in place when you try to tighten them. Two of the four bolts are now useless. The plastic covers on the legs came warped and don't shut properly, so I removed them before I even used the table. Bosch, save some money and just leave them off, they do nothing at all. Overall, I do not feel like this table is worth the price. I know it isn't a premium table, but really it could have been made a significantly better quality without any extra cost to Bosch if they had put a bit more thought into the design. I have not used any other router tables, so I do not know how this compares to other tables in the mid-tier price range.

It a good table but I want disappointed in some parts being plastic

Arrived quicker than date provided at time of order. Amazon refunded when import costs were less than quoted which was a nice surprise. Bought for partner who is a joiner - no complaints so far

Nulla da dire. Perfetto.

My first router table, I checked the specs before buying and found my exact router model in the list of compatibles - and it fits perfectly. Went through the instructions carefully - they're pretty hard to read if you're over 40, but they're complete and easy to follow. There's a lot of accessories with this table - from the feather boards to the bit height adjuster to the circle template - and the built-in storage pockets do an okay job of holding them all - they fit in nicely for shipping, but getting them all back in after use just didn't happen for me. A minor inconvenience considering it's a more than adequate, less than professional piece of equipment for the price. Great for the hobbyist, for sure.

Acabados en general buenos. Fácil utilizar, de montar y desmontar, de ajustar medidas y router. Bastante práctico. Sólo no me agradó que algunas piezas de plástico si no se tiene cuidado las puede uno romper o se desgastan rápido al no tener cuidado en su manejo . Pero en general muy bueno.

Ich habe gerade den Tisch ausgepackt, und bin jetzt schon enttäuscht. Ein Tisch der in Deutschland verkauft wird, sollte doch wenigstens eine deutsche Aufbau Anleitung dabei haben, aber leider kann man das wohl als deutscher nicht mehr erwarten!