Granite, Marble & Stone Repair Kit - Fix Chips & Defects in Minutes | Restore Tiles & Countertops with Ease | for Quartz Corian Marble or Stone | Flawless Results Every Time | Repair Up to 20 Chips

The media could not be loaded. I used the Stowsen Multi-Color Surface Repair Kit to fix deep chips and cracks on my engineering stone vanity in the guest bathroom, and I’m impressed with the results. The kit was incredibly user-friendly, with clear instructions that made the entire process straightforward, even for someone who’s not a DIY expert.The color options included allowed me to perfectly match the repair to the existing stone, making the defect virtually invisible. I was concerned that the repaired area might stand out, but the finish blended seamlessly, and it feels as smooth as the original surface.I also appreciate the durability of the repair; it’s held up well with daily use and looks just as good as the day I applied it. This kit is a must-have for anyone looking to fix chips or minor defects on stone surfaces. It’s cost-effective, easy to use, and delivers professional-quality results. Highly recommend!

The media could not be loaded. So much easier than I was expecting! First week in our new house and we decided we wanted to change out the shower heads in the bathrooms. Unfortunately the plumbers wrench did not get a long that well with our shower tiles. We ended up with a chipped edge and a small dent.The kit comes with everything you need to easily repair any number of white hues and overall It was far simpler than I was expecting.The kit comes with a number of white hues... Simply find the right color match, fill and bake with the included light and it comes out looking as good as new.A few tips learned the hard way: Using the clear strips to smooth the filled ahead of and while baking will give you a seamless surface. Make sure not to overfill your crack or you will have a lot of sanding to do. Overall it's a great kit that works well and allows you to restore your tiles to their flawless finishI'm removing one star simply bc my kit didn't come with the eye protection film as indicated to use in the instructions.

This stuff really works and cures in a minute. A couple of caveats: 1. Use masking tape to carefully mask off any areas around the repair. If you overfill the repair, the sanding to remove the overfill is tedious. 2. Less is more to prevent overfilling. It's a little confusing as to which syringe to use but I found the ceramic works for quartz. Have not used the acrylic yet. I've done 3 repairs -- 2 on chipped ceramic tile and 1 sizable chip on a quartz countertop. The first repair was overfilled and spread into the grout -- almost impossible to remove after curing, but in this case hardly noticeable. The quartz repair took lots of small pieces of masking tape to prevent overfilling, but came out great. See photo. Highly recommended.

The kit is clean and contains detailed instructions. The resin is provided in preloaded tubes that are so easy to handle you could actually use them without gloves without getting it on your hands. The Curing Light is of surprising strength and quality.Unfortunately, it has an integrated power supply (not pluggable) and mine was defective. I opened it up and found what appeared to be an accidental drop of solder on the board joining 2 components. When plugged in, the behavior was continuous flashing of the display light with no ability to turn the LED on.I cut off the power supply, stripped the wires and hooked the Curing Light up to my variable DC power supply at 4.2v. Worked flawlessly.

First of all, this is not easy to use. I can see if you use it a few times, you will get better. Second of all, if you use it to fill travertine holes, the crack still shows up. I could see that it might work a bit better on a chip out of marble. For travertine, get the paste and just fill the hole.....works a whole lot better.

Our granite had a fairly large chip next to the sink. The clear epoxy fixed it seamlessly and it took less than 5 minutes. Longest part of making the repair was reading the directions.

I read reviews before buying this. Then I bought it and prepared. Followed directions, read them about seven times before trying. Put clear packing tape over the spot needing repair. Matched my color on top of the tape. Threw out tape and sampling. Knew I had a perfect color match with the Dark White choice. Kit has about six or seven tubes with different colors and ability to mix further if needed. I fortunately did not have to mix. Repaired two small chips in my composite white sink basin. You have to know where they were to find them! Very nice repair! Extremely pleased.

A while ago I had to cut off a faucet handle with a saws-all. The result was the darker picture with the cuts.The Good:This repair saved me about $1000 and the labor of me replacing the countertop. It blends well and seems to be pretty solid. Easy is an understatement. If you do it in layers it works best in larger areas. Just keep building it up/curing/sanding. You'll get there.While this is a great product I was disappointed because the UV light that came with it to cure the stuff was defective. I could only use setting 3. Setting 1 and 2 would shut off. This resulted in me hitting it with the light probably 10 times longer than I would have had to iff the thing worked right. Also, who knows if the cure strength is different?All-in-all $50 vs $1000, I'll take this any damn day.Oh, and I tried buffing with the enclosed buffer wheel and my 30,000 rpm Dremel. That's WAY TOO FAST. Just burns stuff up. Use a low RPM tool, or it might not need buffing.