Nilight Front Bumper Compatible for 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Jeep Wrangler JK/JKU Rock Crawler Fog Lights Hole Winch Plate

This is a great sturdy bumper. Lots of room behind to run wires or whatever and keep it protected. I am impressed. Only had it a short time but well laid out. OEM Fog lights was a nice touch! Mounted 12k Badlands Winch easily and the front camera was easy to install as well. I like how it is not "In your face" but very functional for off road. Install was super easy. Find the bolts to remove the old bumper after removing the connection to the Fog Lights, move the fog lights to the new bumper, mount it up, and done! Fog Light wires fit, however, just barely. Had a bit of work to do there, but 10 minutes maybe. Total install, taking my time, two hours. One thing I upgraded was the D-Rings, these in the pic are the galvanized ones that came with it and I upgraded to some black ones. I really like that look a lot better! The Winch was easy to mount and route the wires. Did take a bit of time to decide where I wanted the on/off switch, but decided to put it under the hood by the battery. Works well! I had a License Plate bracket that took two self tapping screws to install. When I go off-roading, I will be able to easily take it off so it does not get damaged. (Don't remember where I got it, but any of them will do). The front camera (hard to see) mounted nicely above the License Plate but below the winch where it will not be in the way. Note, did have my German Sheppard supervising the whole time... She likes it as well!

Great fit. My husband put it on himself and it looks great. He has a 2013 Jeep Wrangler, great fit, matches the color well. Easy to put on had all the parts and instructions. Great buy our winch fits well also.

This took 2 people to install, about 2.5 hours. It probably took that long due to having to run for parts twice. The issues we had started with the welded bolts being off, so we had to hammer two of them a little to get them to line up correctly. The factory fog light screws do NOT fit this bumper. We had to go get new bolts and nuts, which were a tad difficult because there’s not much room to work with on the outer part of them. We also had to stretch the fog lights further than factory. Luckily, there was extra wire and we didn’t have to splice anything. Overall though, once installed, it looks great and I will be getting a winch installed on it soon! The couple headaches didn’t outweigh the positive. For the price, I think it’s a good quality bumper!

Arrived on time, undamaged and blemish free. Installation was straight forward. Came with all hardware including small nuts and bolts for fog lights. Hardest part was removing the stock bumper.

Easy install, installed by myself. First off, when the bumper arrived the box and packaging were great, no damage to the box and good amount of styrofoam inside for protection. Hardest part was removing the stock bumper. Like other reviewers no included hardware to mount the factory fog lights, not too bad had some screws that fit everything lined up and fit great. You can use the factory fog light wiring without having to buy anything else, you just need to cut open the wire cover and pull out some of the slack and it reaches no problem. Looks great and good value.

Bought this bumper as a Christmas gift. It's very well build for the price. Fits like a glove and bolts right on. Kid did hit a pole with it and it took it well so it's built right plus saved the front end of the jeep.

I like the design and the weight of the bumper. The powder coat was broken on a few locations, the fog lights can not be mounted with the OEM screws, and the fog lights can harness would not reach both lights, required adding 6 inches of extension wire to one connection. The last problem was the hardest to overcome the bolt pattern would not line up, had to twist the bumper on open side to get the alignment. Seemed like a heat warp of the bumper from the welds. It is mounted so I will not return it. Hope when I get a winch that at least will go better.

Solid bumper, no rust issues after more than 6 months. No bending it's pretty solid. Functionality is nice as you can mount a winch on it and it holds the fog lights and tow hooks. Mounting is not incredibly hard just need some sockets and an hour or two.

Solides et durables Dit parfaitement sur un jl 4xe 2022

Very happy with bumper fit great and all proper hardware was provided great product

Ordered, given ship date, that came and went so weeks after I tried to cancel and as soon as I did I was told now it’s being shipped. By the time it arrived I had bought another one for sane price and it was much heavier and sturdier than the nilight so I returned it.