Evolution S185CCSL | 7.25” Metal Cutting Circular Saw | Cuts Steel & More | 7-1/4” TCT Blade Included | 45° Bevel Cuts | Dry-Cut | 15A Corded Power | Accurate, Powerful, Reliable

This saw is a monster!! I've been using it to cut 24" diameter pipe that is 1/2" walled , I made a jig that I put on the pipe and it has magnets to keep it in place , then I guide the saw along side it and it's a perfect cut every single time !! I've had it for about a month now and just ordered a spare blade for it , I know as much as I use it that day will come that I'll need to change it , I also have a evolution mitre saw that has a 14" blade and have had that for prolly 8 years now and you would believe how many cuts I get out of a blade on that thing , I think I'm only on my 3rd or 4th blade on it in alm that time, thousands of cuts !! I'd say don't even think about it anymore , just get one , and you'll think how did I ever get away with not having g this awesome tool !!

So I read through the reviews and thought people were being a little over the top with their reviews. That ended up not being the case, this saw cuts fantastic, if you can run a circular saw for wood you can run this saw through metal. It shows pictures of people cutting square tubing but it didn’t do very well through that in my opinion, chop saw is much better rated for that application. I cut up a 5’x10’ sheet of 3/8” steel plate like I knife through butter. The saw is very loud and throws metal chips everywhere so I recommend and face shield and ear plugs, rolling magnet makes clean up easy. When buying a replacement blade make sure to buy the 20mm bore blade that is the goofy size it takes. Great saw wish blades were a little cheaper.

Solid performer. Fence is slightly flimsy (plastic), the cut gauge is like learning a new language. I bought spare 8.25" Olsen steel cutting blade. I think I can send them out to resharpened. Collects about 80% of the chips. Wear gloves, the reservoir gets hot from the chips. Cuts smooth as glass. Very noisy, wear earplugs

Highly recommend this saw if you have a lot of heavy metal to cut. I used mine on some 1/2 inch plate, as long as you take your time it's no problem. I'd say it's a lot quicker cutting speed compared to a torch and a much cleaner cut.

Amazing saw. We used it to cut 1/16" all the way up to 3/8" plate steel, 2" angle iron, and 2" square tubing. It went through it all like butter. It works amazing. The only issues we've had with it were that the bolt for mounting the blade stripped out and we had to re-tap it and use a larger heavier bolt. Also the glass viewing port shattered while cutting through a piece of 2" angle iron.

Bought this for my husband and he uses it all the time. Easy to use with great power and speed. Good value for money. Very quality

Bad*** saw cuts are so smooth I can rub my fingers without getting cut

Definitely wouldn't recommend this saw and the guide. Purely on the fact that they don't include the "adapter" for the track system for the circular saw they make. Why would you not include an adaptor with the saw or the track, much less need an adapter to adapt 2 products both made by Evolution? Poor design if you ask me, especially for an additional $60...

The blade only cut a few sheets of metal

Should have bought one of these 20 years ago. What a time saver. Be sure to empty out your chip trey often or it will get packed tight. I cut about 12 feet of 3/8" plate and then cut a 1/2" plate about a foot long. Exceptional finish.

Compré este producto porque quería ser más eficiente en los cortes de perfiles de acero al carbón ya que tardaba mucho con una Esmeriladora o amoladora y los cortes no estaban también definidos compré la sierra circular y la complemente con un sistema de Kreg para hacer mis cortes y la verdad he tenido muy buenos resultados, otro punto a favor es qué hora es el precio es un producto de muy buena calidad comparado con otras sierras circulares para metal

La primera vez la utilice en una lamina de aluminio, y con mucha precaución luego la utilice ennuna solera de 1/4 de espesor y me sorprendio su precisión.

A bit weak. Also, I ruined one aluminum blade in no time with just 1/4" plate.