Keyless2Go Replacement for New Uncut Transponder Ignition 4C Chip Car Key TOY43 (2 Pack)

Programmed to my truck in under 2 minutes. Both keys successfully programmed. Worked without a hitch.

Great product. Once I received both copies in the mail I took them to the nearest key cutter. I got a great deal between the two copies and the cutting itself. There are no logos built into the key.#Great Value #Great Product #Great Quality

These keys works, they can be programmed by yourself. We are happy with this purchase.

This is the key indicated by Amazon for my 2006 Camry LS. The keys did not have the proper groves for the TOY43-EK--May fit other TOY43 applications...but not ours. Went to Home Depot and they had the key needed and even programmed their key on site. Worth the $75 bucks

Took myself to 2keys4-1 brought two Keys with me to get them cut. She messes them both up and she how did original ignition switch to get in the car so I make sure that they were good right wow, huh she f’d them up. I mean didn’t even offer me a new set of keys or nothing it never started. The car key never even worked in the door good thing I’ve changed.frustrated bulk man

OK

worked great for my toyota - I bought a bunch of these. Can't remember if this was the for 2001 solara or the 2006 sienna. They all worked where they were supposed to. and as warned, they did NOT work on the 2007 avalon. Good product.

worked well and was easy to program with the included instructions. Do note that it can be a challenge to find a locksmith that will cut a key for you that is not his/her own stocked item. Look for smaller mom and pop shops and you should be fine, you probably won't have luck at Home Depot, Ace etc.

I purchased this two pack of Toyota "4C" chip transponder keys to make two spare keys for my 2002 Camry LE. I had them both cut at a local locksmith for $4 each, and was successfully able program both keys myself using the following procedure. FYI. This procedure requires the original "Master" key and it does not "decommission" the original Master key. I hope this procedure helps someone else!PROGRAMMING: Take your time and carefully follow these exact steps...1. Close all windows and doors and have the original Master key handy.2. Simultaneously press and release both the brake and accelerator pedals 1 time.3. Insert the original Master Key into the ignition but do NOT turn the key (Insert only. Leave key in the LOCK position. Do NOT turn the key to the ACC or the ON position. FYI. I tried this procedure first turning the Master key to the ON position and the procedure did not work).4. Within 15 seconds press and release accelerator pedal 5 times.5. Within 20 seconds press and release the brake pedal 6 times and then remove the Master key.6. Within 10 seconds insert the New Key into the ignition but, again, do NOT turn the key.7. Within 10 seconds press and release the accelerator pedal 1 time.8. At this point, the security light in the dash will be blinking. Wait patiently for approximately one minute. The security light stops blinking and turns off.9. When the security light turns off, remove the New key and press and release the brake pedal 1 time.10. Test your New key now. It should work if you carefully followed the above instructions.11. Test the original Master key. It should still work.12. Repeat steps 1 through 11 for the second New 4C chip transponder key.13. Congratulations! You have successfully programmed your new 4C chip transponder keys.Disclaimer: I am not a locksmith or a Toyota mechanic. Just a DIYer. I found this procedure online and added a bit more detail. I have no idea what other models this works on. The good news is that this procedure does not decommission your original Master key, so in my opinion, it is worth a try. Note that the 2002 Camry LE takes a 4C key. Google search your Toyota model year to see if your Toyota takes a 4C key. I also have a 2008 Corolla with a more advanced security system that this procedure does not work on. My 2008 Corolla requires a 4D key. You can recognize a 4D Toyota key - it has a single "dimple" or "dot" on the shank of the key. The 4C keys do not have any markings on the shank. Good Luck. I hope it works for you!

Works 100%. Saved about $100 compared to dealer price.

Excellent buy

Price, easy to do self programming

I couldn't not program it my self, it has to be programed by the dealer, I was able to cut it tho, I can lock/unlock my car but won't start it obviously, not necessarily the seller's fault