fischer FIS VL 300T Injection Mortar Chemical Anchor Resin 300ml

So far sticks to everything I have applied it to, sets very quickly so make sure you have prepared the area in advance but for long runs you can go back over again within 5 mins. Extra end means you don't need to use in one hit but if you stop the end will solidify inside and will have to replace with the spare end. Great for injecting and filling using a scraper. Goes hard as concrete. Great stuff.

Did what it needed to do as per description

An excellent anchor resin which cures rapidly, but take note: 1. This is not 'clear' as per the description. It is actually a grey colour. 2. You need hulk strength to extrude this; it's very thick. Whilst I did not suffer from my gun breaking (many reviewers have) , it did take a lot of force; youay want to invest in a good quality sealant gun which will be kinder on your hands. 3. Make sure you get two mixing nozzles with each tube you order: my order of two tubes only came with two nozzles in total... I had to contact Amazon for the missing nozzles, which, they did send out. 4. This sets hard very rapidly, so, if like me you have several anchors to set, be sure to prepare and organise everything you need before you start. In conclusion, this resin works and sets hard and strong, but bear in mind the above, and all will be well. Four stars just because it's difficult to extrude.

I love this stuff. It is a mixture of cement and resin. Easy to use and sets rock hard. I've used it to fill holes in outside walls that mice have found their way through. Because it is very stiff a heavy duty cartridge gun is almost essential. Also, although you can buy extra tube ends, the cartridges themselves have a shelf life under 12 months regardless - so I wouldn't stock up.

Great product

Does what it says on the tube, worked very well 5*

Excellent product for many applications as it's a resin cure and doesn't rely on evaporation. Also used as replacement for Polyurethane adhesives as it doesn't expand during the curing process which only takes a short time frame. Nozzle. All my purchases have always been supplied with a mixer nozzle in the sealed bag upon arrival. Clear is, I agree a little confusing as when mixed it's dark grey in colour. Can also be used to secure loose larger wall plugs in older buildings but remember, to get a wriggle on, only it sets very quickly (you have been warned) on the whole a brilliant versatile product.

I was using this to repair a sandstone gatepost that had received a hit (!). It works well, but sets very quickly so you have to be sharp off the mark when aligning pieces. A very useful addition to the collection of repair resins and sealants that I have.

Tut was es soll.