ARB/OME Leaf Spring Suzuki Sierra F (CS012FA)

Brain installation went very well I had no issues with them I'm rebuilding chassis components haven't got to check the level yet

I ordered both the front and rear sets for a Suzuki Samurai. Springs arrived on time, as promised, and were well packaged. The installation, while straightforward, does take some time and the proper tools, jack stands, jacks, etc. These should only be installed by an individual knowledgeable of the process, and safety procedures. Otherwise you could have the full weight of a Samurai laying across you chest, and a widowed wife.That being said, I was very happy with the results. I achieved a full 2” lift in the front, and 2.25” in the rear. We will see where it settles out as the springs settle in.Don’t forget, you need to purchase the bushings separately. And you will also need new, longer shocks to accommodate the increased shock travel. Stock length shocks will not work properly.

The springs made a world of difference for my Samurai. They gave it about a 2 inch lift.It rides and handles much better now.When installing the springs you will have to enlarge the hole on your stock spring plate/shock mount. The bolt through the spring pack is a little bigger than the one on stock springs. I used a step down drill bit. The description says you need longer U bolts but I had replaced mine a few months ago and they were longer than stock so I didn’t have any trouble. I had already replaced all the bushings and shocks/ steering stabilizer a few months ago, so I just reused them. Adding these springs and installing a 3k Toyota carb are probably the best two mods I’ve done to my Samurai so far.

Old Man Emu by A.R.B. is absolutely the best suspension on the planet.

It would be nice if the bushings and ubolts were mentioned or in this kit

Real stiff compared to stock

Damaged

Perfect fit for my stock samurai. New leaf springs lifted the body up 3 inches with stock replacements