LED Resistor Kit H4 (9003 HB2) HID Relay Harness Adapter Anti Flicker Error Decoder Warning Canceller

Stopped my led low beams from throwing code and bulb warning

Did not work on my Mini Countryman, the lights still flickered and had no high beam.

did not help me to fix flickering on BMW e91

Still to early to say if this is effective or not. At the moment I have install them for front fog lamps, but I am still getting a flicker of the lamps and a dash warning on vehicle startup. The warning does go away, but it is still disconcerting that the warning still appears on the dash. Only time will tell if they are fully effective.

Installed on 05 CLK C209 with led HB4 foglights, fixed error message and flashing

Easy plug and play work great!

These are awesome. Super cheap, last me about a year and a half each, which is not bad considering the price, I’ll gladly keep buying these over and over if it means I can run LED in my car without getting error codes

Las compre para unos focos leds y la verdad una excelente compra

I bought this product after using a Bluetooth OBD adapter and OBD JScan did not fix my issue. Don’t get me wrong both products are still of good use to me, but with my luck it was not enough of a fix.I hit a deer awhile back and had to partially rebuild the front end of my 08 Grand Cherokee. When replacing the headlights, I opted for the SRT8 style headlights so I’d have projector low beams instead of reflector low beams. Reflectors aren’t bad, but projectors make much better use of the light sources output. The downside is halogens suck in most projectors. Companies can try as hard as they want, those relatively small halogen bulbs can only push out so much energy before their longevity falls off. LEDs work depending on how they’re designed in terms of diode placement. HIDs are ideal, but I didn’t like the idea of doing a harness conversion, at least for the time being. So I opted for the LED route as they made them in the 9006/9005 flavor.I came across what seemed to be a nice combo set by Fahren for $35-40ish. I took my bets on it and I ended up being gladly surprised. Nice modern 6000k color temp, bright as s*** and the ring on them were already turned for the optimal beam pattern, even in the projectors. But I did have a problem and I kinda went into it knowing that the Jeep may reject the LEDs in some way because of it being in the era where vehicles started relying more and more on CANBUS to communicate all it’s different functions in all different directions.The problem was that when the bulbs were powered on, the fans were super loud, kinda like the old XB360/PS3 fans that sounded like a jet about to take off. And when they would get powered off, they would stay illuminated very dimly and flicker until the Jeeps accessory circuit had shut off for so many seconds and then they would fully power off. Mind you, the ‘DRL on ECU’ was disabled so the DRL had no effect on the problem. With the low beams, it wasn’t that bad but I ended up keeping the halogens in the high beams because if I used my brights, they would do that flickering crap and I know darn well someone or a cop is gonna be upset at that when I’m driving and kill my brights but stay and flicker.That brings me to using JScan and buying the adapter. By enabling the High Intensity Discharge Lamp option and Quad Headlamps, that would solve the problem; however, the HID option was already active from factory (despite not having the D1S/9005 SRT8 headlight setup from factory) and upon enabling the Quad Headlamps, only the right low beam would even work and still flicker when powered off. Deactivating both options made both work again and the fans were self regulating their speed instead of running only wide open. So I left the settings as is and then invested in a set of these for the low beams. Plugged them in, turned them on and everything was normal, the light output didn’t drop any and upon powering them off, within two- or three-tenths of a second, they shut off completely. Not instantaneous, but still faster than a halogen can go from full intensity to fade to off. And it stopped them from flickering at all. So last night I ordered a second set for the high beams. Once I receive them Monday, I will install the led high beams again and then I should be rocking and rolling.The only downside is that they do get really hot while in operation. That’s how they’re designed to work, basically acting as a dummy load to closer match the LEDs amperage draw to that of a halogen. Remember, LEDs only emit like 1/3 the amount of heat that a halogen bulb of similar wattage emits. Halogens rely on heat to produce light, requiring more energy; LEDs are diodes that generally only get hot if they’re being driven to their limit, mainly why most led headlights have a fan to compensate for the power they’re cranking out of the chips. In my case that has no effect on me, but for those that have vehicles that tell you what bulb is out or gives a general bulb outage alert, that should fix that problem when converting to led from halogen. But it seems to me like it has some sort of capacitor inside it that drains any residual charge in the circuit, which I believe to be the problem I was having. The bulbs had a built-in error decoder but it must not of had a capacitor to keep that from happening.Overall, it seems to be a well worthy purchase. It’s an affordable price and so far has held up fine and hasn’t melted anything and caused a fire. I bumped my hand against it while I was adjusting my right headlight after I hit another deer last week (I was doing 35 in a 35 this time, instead of 55 in a 55 like last time so damage wasn’t near as bad) and I didn’t even feel the heat for a few seconds. Definitely hot but not scalding. I think the LEDs were rated at 65w supposedly and these have 50w printed on them so maybe that’s why mine ain’t getting so hot, really couldn’t tell ya for sure. Or maybe they just dissipate the heat fast in the moisture dense air us Western Kentuckians have been dealing with a lot lately.But yeah, either way, if everything is telling you this is what you need for your led conversion, most likely this is the option for you. Just make sure you select for the right harness/bulb type.

A rispetto di altri provati queste resistenze funzionano bene e fanno bene il proprio lavoro.