Anex Ultra Low Profile Offset Ratcheting Screwdriver 90 Degree Angled For Tight Area (Magnetic 2 Bits Set) Straight Flathead, Green

This literally came in just in time! The perfect tool for what I need to do. I have a Land Rover LR4 and it’s due to have it’s spark plugs replaced. The only problem is that it has no room for a 3/8” bit with an elbow and extension attached to it. There is barely enough room for a Torx hex wrench and imagine loosening a 2 inch screw at a 1/4 turn each rotation. So you can imagine this is a pain in the butt.I bought something else similar to this at Harbor Freight, but it’s still too thick and doesn’t give the proper back end clearing. There are others similar to this one, but none had what I wanted. Which was something low-profile that has a backing so that I can apply pressure to turn counter-clockwise or clockwise. All others have either an open back where the bit can slide through without pressure applied or has a thick back and a 1/4” bit socket attachment (Harbor Freight).This was literally the only thing available and it performs quite well. It’s solid, made out of some heavy metal material and comes with a philips and flat head bit. I’m able to fit this into the narrow area and take off the bolts fairly easily. And the good thing about this is the metal backing holding the bit in place is actually a magnet on both sides. Not only does it hold the bit in place it allows you to pick up, for instance, a bolt that fell between your exhaust manifold and some piping.So far so good… if you need a low-profile hex bit ratchet that you can apply pressure to get the whatever it is off, then this is it!

I used this to tighten all the door knobs in our house that do not have the screw to take the knob off. its harder to access the two mounting screws with the knob on. this tool makes all that possible and works great to torque down.

Sometimes you just find these jobs where the clearance on the screw is so tight it makes you wonder what the heck they were thinking.This tool is exactly the thing you need to get into those tight spots. It can turn a ridiculously difficult job into a simple one.It seems to be well made. The ratchet functions smoothly and it's easy to change directions.It comes with 2 tiny bits (standard + Philips) but is compatible with any quarter inch bit from any other bit set that you might have.

Works well. Haven't any issues included bit surprisingly strong

I was replacing a driver side window in my RV. Was told that the dash would need removal to access some of the screws. I bought this wrench and cut a bit down short and got the screws out and then back in with the new window. Love this tool!

I use this for dropping float bowls on carburetors that are still on the bike. Saves so much time and makes it easy to adjust float height, clean float seats, replace jets, etc.. Yes, for some screws you may have to press on the bottom of the tool and get it perpendicular to the surface to get the screw started upon removal, but otherwise works great. Well made and a good price.

I needed to change the door swing on my brand new fridge. That requires taking off the doors and moving the hinges to the other side. On this particular fridge, the screws can barely be reached with a regular screwdriver so I got the doors off but when it came time to tighten the screws when I put doors back on,, they just plain wouldn't go.So there I was with a fridge door on, but hanging loose. That little tool fit in the tiny gap just perfect and just as important had the strength to turn the very stubborn screw without stripping it. Thanks also to near instant shipping and next day arrival my new fridge is perfect! This little tool gets a place of honor in the toolbox!

I was installing shower grab bars, and due to my inexperience, I ended up with a very nice install job but two screws were directly under the grab bar bend, where the bar bends to meet the end plate that attaches to the wall. So, there I was with a really tight fit and two unsecured screws. I chose the Anex 425 Low Profile Hex Bit Ratchet obviously for the "low profile" and for the very good reviews. Upon arrival, the ratchet looked as described on the Amazon web page, and so I tried it, and I was able to tighten the two Phillip screws in the confined space, one at each end, and secure the grab bars without removing the bars and drilling new holes in the ceramic tile. Very pleased, and a nice addition to the tool bag.