DEWALT 20V MAX XR Oscillating Tool Kit with Blades, 3 Speed Cordless Brushless Multitool, Up to 20,000 OPM, LED Light, Battery and Charger Included (DCS356C1)

This oscillating tool hits that sweet spot between power and control. I’ve used cheaper multi-tools that feel like they’re fighting you the whole time—this one doesn’t. The brushless motor has plenty of power for cutting, sanding, and flush work, and it keeps a consistent speed under load. The 3-speed selector is actually useful, not just a gimmick. Lower speed gives you control for detail work, and the higher settings chew through wood, drywall, and even nails without bogging down. The quick-change blade system is solid—no tools needed, and it locks in tight with no wobble. Big standout is vibration control. You can run this thing longer without your hand going numb, which matters if you’re doing trim cuts or demo work. LED light is also clutch in tight or dark spaces—way more useful than I expected. Battery life with the included 20V MAX pack is solid. Not endless, but more than enough for typical jobs, and it charges fast enough to keep you moving. Pros: •Strong, consistent power (doesn’t stall easily) •Noticeably lower vibration than cheaper tools •3-speed control actually makes a difference •Quick, secure blade changes •Built-in LED is genuinely useful Cons: •Blade changes are tool-free but still take a second to get used to •Included battery is decent, but heavy users may want a larger one Bottom line: If you want a cordless oscillating tool that feels controlled instead of chaotic, this one delivers. It’s built for real work, not just light DIY.

Too long, didn't read section: It's a jack of all trades and a master at doing plunge cuts while minimizing cutting into things behind what you're cutting out. Blades/accessories tend to be more expensive vs. other types of tools. Be sure to wear hearing protection. 11/4/2025 Update: It has come in quite handy. I'm currently working to replace some rotted areas near the roof of my porch. It was able to make cuts to remove some damaged sections of 1x8, that I couldn't do with my reciprocating saw (though i did use my reciprocating saw to deal with cutting nails.) I found having some "long" blades (long as in distance from the cutting teeth the the pivot point/connector plate) such as the Arrow OSC125JPT-2A (found on Amazon) really helped out. I do give the blade a break when it starts getting hot. Being fairly lightweight makes using it over your head pretty easy. As expected, the included 1.5 Ah battery doesn't last terribly long. If you plan to do a lot of work in a session, I would recommend getting a second battery if you don't already have a spare as waiting an hour or more for a recharge in the middle of a project gets old quick. As I mentioned in the main review section, there's a bit of a learning curve, but once you get the hang of it, you can make some fairly straight cuts with it. Cuts reasonably fast when cutting material less than an inch thick. Original: At the time of this review, it was cheaper to buy it in a kit than by itself. I mainly got this oscillating tool as it gives the ability to plunge cut into things while minimizing cutting into material behind what I'm indenting to cut. Overall, the quality feels reasonably good. I did find that the 12 O clock blade position was a little off on mine, but that's not a deal breaker for me. Changing blades and blade compatibility: The quick change blade mechanism makes blade changes quicker and easier than most other oscillating tools on the market as the retaining bolt does not need to be removed. The blade can also be positioned at multiple angles across one axis. I should mention that while it's compatible with most oscillating tool blades/accessories out there, blade/accessory compatibility is not quite as standardized/universal such as blades for reciprocating saws. There's an adapter included for some that are not compatible with the normal mechanism, but you loose quick change functionality and you also need a 5mm Allen/hex key that's not included. Most blades/accessories advertised as universal fit should work with this tool without the need of an adapter. Info about blades: Blades and other accessories for multi-tools tend to be a bit more expensive than other types of tools out there if you want something above the bargain bin blades/accessories. Based on my research, they also tend to have a shorter lifespan vs. blades/accessories for other types of tools. The kit includes a HCS (high carbon steel) blade for cutting softer materials such as wood and plastic and a bi-metal blade that can tolerate some soft nails, but it will likely quickly start the dull the blade after going though a few nails. If you think you'll frequency be going thru nails or even worse hardened deck or drywall screws, there's carbide blades out there that should survive for longer, but if you're able to cut though a nail/screw using a reciprocating saw or angle grinder, you oscillating tool cutting blades and wallet will thank you. Using the tool to cut: As for performing cutting in wood, I found that it's not bad in terms of vibration and gloves can provide vibration dampening for your hands. Cutting does generate a good deal of noise, so hearing protection is a must. For cutting technique, you want to let the tool do the work, don't try to force it as that can lead to burning the material being cut and also results in heating up the blade more, which will likely shorten its cutting life. You want sweep back and fourth with a light touch. If there's no risk of hitting nails, the blades Japanese style cutting teeth supposedly do a better cutting job for wood. I have some on order and will probably provide an update when they arrive. What the tool excels at: This excels when it comes to making plunge cuts into things while minimizing cutting into things behind what you're cutting out. There's also a optional depth guide that can be purchased to further mitigate cutting material you're trying to avoid cutting into. I feel safer using this to cutting into a wall vs. a reciprocating saw as there's less chance I'll damage something behind the drywall such as a pipe or wire. Choosing the best tool for the job: You can also do things such as sanding or doing a cross cut on a 2x4, but you're likely better off using a mouse sander for sanding and a miter or circular saw will by far provide a faster and straighter cut and the blades on both saws will almost certainly last eons longer than even a set of top notch oscillating tool blades. What I'm saying is just because it can be done be done with an oscillating tool, doesn't mean it should be done on a regular basis if you have a better tool at your disposal for a particular job. Cost cutting that was done: The only things that costs were really cut on are the battery and charger. The included battery is the lowest end offered by DeWalt, a 1.5 Ah battery that has no LEDs for checking charge level. The included charger appears to have a mac charging current output of 1.25 amps. I would have liked to see a 2Ah battery. Conclusion: It's a decent tool with a variety of uses. It can do a variety of cutting of tasks in a pinch, but this won't outshine a circular/miter/reciprocating saw in terms of blade costs and results at tasks those tools are designed for in most cases. I'm rating this 4.5 stars as I was able to get it at a good price.

Works great! Dies the job well!

Great tool. Light weight. Adjustable speed and the "no tool" blade change is fantastic. Such more more convenient than a corded tool. Built in LED lights are perfect for dark corners.

Such an amazing tool

Works good. The blades that came with it didn’t last long but I got some more.

This is a nice quality multi tool. Comes with the bare tool, bag, battery, charging base & starter blade. Contacted the seller with an issue and they made it right.

Very good tool

Excelente herramienta, muy potente. De los puntos a considerar es que vibra mucho y si la usas por largos periodos de tiempo puede llegar a molestar (según sé la makita de nueva generación redujo considerablemente la vibración). La he usado pocas veces, pero cuando la he requerido, ha realizado cosas que son imposibles de hacer con otra herramienta (por ejemplo tuve que cortar al raz una tubería de cpvc de 1/2 " , lo hizo en segundos y fue un corte excelente). Viene con una batería de 1.5 volts, que la verdad le have falta fuerza, recomiendo usarla cok una bateria de al menos 2.0v.

As expected from dewalt great product

اصلي ومش صيني مكسيكي وأفضل من المنتج المحلي اللي عندنا صيني ، بس كهربته 110فولت

Très bon produit.

Ótima ferramenta parece desnecessária mas depois de usar não vive mas sem ela