Puig 4051C Carbon Performance Tank Pad

Works well with my tank extender, good quality, stick on well. Worth the investment.

Looks great! Placed on a 2025 triumph trident. I cleaned the tank well with rubbing alcohol, and warmed up the area with the hairdryer prior to applying. I applied a small section at a time rubbing it down using the rounded side of my scraper to get any air bubbles out from under it. I used the rounded side of the scraper so I didn’t damage the appliqué. I lined up the protector with the paper still on, and when it was straight and where I wanted it to be, I pulled back a small amount of the paper to expose the sticky portion on the first section. Each small section I made sure that it was firmly rubbed down before moving on to the next section. Did this technique because of all of the advice in the comments said this made the best adhesion to keep the edges from peeling up. Good luck! I also included a Pic of scraper with rounded edge that I used.

So far so good!! looks great and seems well made.I let my bike and tank protector sit outside in 95 degrees for one hour. this protector has to be installed correctly, just cant remove it from the backing and apply it all at once. one must stick one end on the tank and slowly peel back the backing as you work the protector into the tank, removing air, working your way to the other end. do this and you will not have bubbles. I bought the clear and have zero bubbles!! some reviewers stating problems with it sticking, ends coming up. well so far it looks well stuck on the tank but time will tell. if I notice that happening within my return window its going back. Why did you pick this product vs others?:brand name

Not that great of quality. The adhesive starts lifting after a few rides

Great protection for my 2024 Kawasaki Ninja ZX6R 40th anniversary edition! Grips well and it securely on there. Had it on for a few months now. Held up well! Fit is spot on. Great value for a clear view to see that paint job.

clear is the only way to go. i like it because it matches whatever color the bike is. very discreet protection.

I finally spent the money and bought a name brand protector. Cleaned everything well and made sure the temperature was right. The top is not sticking properly. To be fair, the gsxr 1000 has a pretty sharp bend in the tank, but still pretty upset that it does not stick properly. Other than that, it looks great and seems high quality compared to some of the Chinese ones I've bought before.

Works great for my tank. Just make sure to clean and prep the surface area prior to sticking, I haven’t had any issues with the few months I’ve had it on. Top tip use heat to help adhere the pad.